TUT: adjust surfaceFeatureExtractDict to remove optional sub-dictionary

- as of v1706
  extractFromSurfaceCoeffs { ... } is an optional subdictionary

etc/caseDicts/surface/surfaceFeatureExtractDict.cfg

@@ -16,11 +16,9 @@ FoamFile
 
 extractionMethod     extractFromSurface;
 
-extractFromSurfaceCoeffs
-{
-    includedAngle    150;
-    geometricTestOnly no;
-}
+includedAngle        150;
+
+geometricTestOnly    no;
 
 subsetFeatures
 {

etc/templates/closedVolume/system/surfaceFeatureExtractDict

@@ -18,10 +18,7 @@ CAD.obj
 {
     extractionMethod     extractFromSurface;
 
-    extractFromSurfaceCoeffs
-    {
-        includedAngle    150;
-    }
+    includedAngle        150;
 
     subsetFeatures
     {

etc/templates/compressibleInflowOutflow/system/surfaceFeatureExtractDict

@@ -18,10 +18,7 @@ CAD.obj
 {
     extractionMethod     extractFromSurface;
 
-    extractFromSurfaceCoeffs
-    {
-        includedAngle    150;
-    }
+    includedAngle        150;
 
     subsetFeatures
     {

etc/templates/inflowOutflow/system/surfaceFeatureExtractDict

@@ -18,10 +18,7 @@ CAD.obj
 {
     extractionMethod     extractFromSurface;
 
-    extractFromSurfaceCoeffs
-    {
-        includedAngle    150;
-    }
+    includedAngle        150;
 
     subsetFeatures
     {

tutorials/compressible/rhoPimpleDyMFoam/annularThermalMixer/system/surfaceFeatureExtractDictDefaults

@@ -16,10 +16,8 @@ FoamFile
 
 extractionMethod    extractFromSurface;
 
-extractFromSurfaceCoeffs
-{
-    includedAngle   150;  // Identifes a feature when angle
-}                         // between faces < includedAngle
+includedAngle       150;  // Identifes a feature when angle
+                          // between faces < includedAngle
 
 trimFeatures
 {

tutorials/compressible/rhoSimpleFoam/gasMixing/injectorPipe/system/surfaceFeatureExtractDict

@@ -19,14 +19,11 @@ walls.stl
     // How to obtain raw features (extractFromFile || extractFromSurface)
     extractionMethod    extractFromSurface;
 
-    extractFromSurfaceCoeffs
-    {
-        // Mark edges whose adjacent surface normals are at an angle less
-        // than includedAngle as features
-        // - 0  : selects no edges
-        // - 180: selects all edges
-        includedAngle   150;
-    }
+    // Mark edges whose adjacent surface normals are at an angle less
+    // than includedAngle as features
+    // - 0  : selects no edges
+    // - 180: selects all edges
+    includedAngle       150;
 
     subsetFeatures
     {
@@ -40,8 +37,8 @@ walls.stl
 
     // Write options
 
-        // Write features to obj format for postprocessing
-        writeObj                yes;
+    // Write features to obj format for postprocessing
+    writeObj            yes;
 }
 
 

tutorials/heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/system/surfaceFeatureExtractDict

@@ -18,17 +18,15 @@ geom.stl
 {
     extractionMethod    extractFromSurface;
 
-    extractFromSurfaceCoeffs
-    {
-        // Mark edges whose adjacent surface normals are at an angle less
-        // than includedAngle as features
-        // - 0  : selects no edges
-        // - 180: selects all edges
-        includedAngle   150;
-    }
+    // Mark edges whose adjacent surface normals are at an angle less
+    // than includedAngle as features
+    // - 0  : selects no edges
+    // - 180: selects all edges
+    includedAngle       150;
 
     // Write options
     writeFeatureEdgeMesh    yes;
+
     // Write features to obj format for postprocessing
     writeObj                yes;
 }

tutorials/incompressible/pimpleDyMFoam/propeller/system/surfaceFeatureExtractDictDefaults

 // How to obtain raw features (extractFromFile || extractFromSurface)
 extractionMethod    extractFromSurface;
 
-extractFromSurfaceCoeffs
-{
-    // Mark edges whose adjacent surface normals are at an angle less
-    // than includedAngle as features
-    // - 0  : selects no edges
-    // - 180: selects all edges
-    includedAngle   150;
-}
+// Mark edges whose adjacent surface normals are at an angle less
+// than includedAngle as features
+// - 0  : selects no edges
+// - 180: selects all edges
+includedAngle       150;
+
 
 trimFeatures
 {

tutorials/incompressible/porousSimpleFoam/straightDuctImplicit/system/surfaceFeatureExtractDict

@@ -18,16 +18,13 @@ boundaryAndFaceZones.stl
 {
     extractionMethod    extractFromSurface;
 
-    extractFromSurfaceCoeffs
-    {
-        includedAngle   120;
-    }
+    includedAngle       120;
 
     baffles (porosityFaces);
 
     // Write options
 
-        writeObj        no; //yes;
+    writeObj            no; //yes;
 }
 
 

tutorials/incompressible/simpleFoam/motorBike/system/surfaceFeatureExtractDict

@@ -19,14 +19,11 @@ motorBike.obj
     // How to obtain raw features (extractFromFile || extractFromSurface)
     extractionMethod    extractFromSurface;
 
-    extractFromSurfaceCoeffs
-    {
-        // Mark edges whose adjacent surface normals are at an angle less
-        // than includedAngle as features
-        // - 0  : selects no edges
-        // - 180: selects all edges
-        includedAngle   150;
-    }
+    // Mark edges whose adjacent surface normals are at an angle less
+    // than includedAngle as features
+    // - 0  : selects no edges
+    // - 180: selects all edges
+    includedAngle       150;
 
     subsetFeatures
     {
@@ -40,8 +37,8 @@ motorBike.obj
 
     // Write options
 
-        // Write features to obj format for postprocessing
-        writeObj                yes;
+    // Write features to obj format for postprocessing
+    writeObj            yes;
 }
 
 

tutorials/mesh/foamyHexMesh/mixerVessel/system/surfaceFeatureExtractDict

@@ -18,10 +18,7 @@ shaftRotating.stl
 {
     extractionMethod    extractFromSurface;
 
-    extractFromSurfaceCoeffs
-    {
-        includedAngle   100;
-    }
+    includedAngle       100;
 
     subsetFeatures
     {
@@ -30,19 +27,15 @@ shaftRotating.stl
     }
 
     // Write options
-
-        writeObj        yes;
+    writeObj            yes;
 }
 
 
 vessel.stl
 {
-    extractionMethod        extractFromSurface;
+    extractionMethod    extractFromSurface;
 
-    extractFromSurfaceCoeffs
-    {
-        includedAngle       120;
-    }
+    includedAngle       120;
 
     subsetFeatures
     {
@@ -55,8 +48,7 @@ vessel.stl
     }
 
     // Write options
-
-        writeObj            no;
+    writeObj            no;
 }
 
 
@@ -64,14 +56,10 @@ spargerInlet.stl
 {
     extractionMethod    extractFromSurface;
 
-    extractFromSurfaceCoeffs
-    {
-        includedAngle   120;
-    }
+    includedAngle       120;
 
     // Write options
-
-        writeObj        no;
+    writeObj            no;
 }
 
 
@@ -79,14 +67,10 @@ stirrer.stl
 {
     extractionMethod    extractFromSurface;
 
-    extractFromSurfaceCoeffs
-    {
-        includedAngle   120;
-    }
+    includedAngle       120;
 
     // Write options
-
-        writeObj        no;
+    writeObj            no;
 }
 
 
@@ -94,16 +78,12 @@ stirrer_baffles.stl
 {
     extractionMethod    extractFromSurface;
 
-    extractFromSurfaceCoeffs
-    {
-        includedAngle   120;
-    }
+    includedAngle       120;
 
     baffles (stirrer);
 
     // Write options
-
-        writeObj        no;
+    writeObj            no;
 }
 
 
@@ -111,16 +91,12 @@ rotating.stl
 {
     extractionMethod    extractFromSurface;
 
-    extractFromSurfaceCoeffs
-    {
-        includedAngle   120;
-    }
+    includedAngle       120;
 
     baffles (MRF);
 
     // Write options
-
-        writeObj        yes;
+    writeObj            yes;
 }
 
 
@@ -128,16 +104,12 @@ baffles.stl
 {
     extractionMethod    extractFromSurface;
 
-    extractFromSurfaceCoeffs
-    {
-        includedAngle   120;
-    }
+    includedAngle       120;
 
     baffles (baffles);
 
     // Write options
-
-        writeObj        no;
+    writeObj            no;
 }
 
 

tutorials/mesh/foamyQuadMesh/OpenCFD/system/surfaceFeatureExtractDict

@@ -14,18 +14,17 @@ FoamFile
 }
 // * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
 
+// includedAngle:
+// Mark edges whose adjacent surface normals are at an angle less
+// than includedAngle as features
+// - 0  : selects no edges
+// - 180: selects all edges
+
 opencfd_text.stl
 {
-    extractionMethod        extractFromSurface;
+    extractionMethod    extractFromSurface;
 
-    extractFromSurfaceCoeffs
-    {
-        // Mark edges whose adjacent surface normals are at an angle less
-        // than includedAngle as features
-        // - 0  : selects no edges
-        // - 180: selects all edges
-        includedAngle       120;
-    }
+    includedAngle       120;
 
     subsetFeatures
     {
@@ -44,23 +43,16 @@ opencfd_text.stl
 
     // Write options
 
-        // Write features to obj format for postprocessing
-        writeObj            no;
+    // Write features to obj format for postprocessing
+    writeObj            no;
 }
 
 
 opencfd_box.stl
 {
-    extractionMethod        extractFromSurface;
+    extractionMethod    extractFromSurface;
 
-    extractFromSurfaceCoeffs
-    {
-        // Mark edges whose adjacent surface normals are at an angle less
-        // than includedAngle as features
-        // - 0  : selects no edges
-        // - 180: selects all edges
-        includedAngle       120;
-    }
+    includedAngle       120;
 
     subsetFeatures
     {
@@ -79,8 +71,8 @@ opencfd_box.stl
 
     // Write options
 
-        // Write features to obj format for postprocessing
-        writeObj            no;
+    // Write features to obj format for postprocessing
+    writeObj            no;
 }
 
 

tutorials/mesh/foamyQuadMesh/jaggedBoundary/system/surfaceFeatureExtractDict

@@ -18,14 +18,11 @@ jaggedBoundary.stl
 {
     extractionMethod    extractFromSurface;
 
-    extractFromSurfaceCoeffs
-    {
-        // Mark edges whose adjacent surface normals are at an angle less
-        // than includedAngle as features
-        // - 0  : selects no edges
-        // - 180: selects all edges
-        includedAngle   175;
-    }
+    // Mark edges whose adjacent surface normals are at an angle less
+    // than includedAngle as features
+    // - 0  : selects no edges
+    // - 180: selects all edges
+    includedAngle       175;
 
     subsetFeatures
     {
@@ -44,8 +41,8 @@ jaggedBoundary.stl
 
     // Write options
 
-        // Write features to obj format for postprocessing
-        writeObj                no;
+    // Write features to obj format for postprocessing
+    writeObj            no;
 }
 
 

tutorials/mesh/foamyQuadMesh/square/system/surfaceFeatureExtractDict

@@ -18,14 +18,11 @@ unit_cube.stl
 {
     extractionMethod    extractFromSurface;
 
-    extractFromSurfaceCoeffs
-    {
-        // Mark edges whose adjacent surface normals are at an angle less
-        // than includedAngle as features
-        // - 0  : selects no edges
-        // - 180: selects all edges
-        includedAngle   175;
-    }
+    // Mark edges whose adjacent surface normals are at an angle less
+    // than includedAngle as features
+    // - 0  : selects no edges
+    // - 180: selects all edges
+    includedAngle       175;
 
     subsetFeatures
     {
@@ -44,8 +41,8 @@ unit_cube.stl
 
     // Write options
 
-        // Write features to obj format for postprocessing
-        writeObj                yes;
+    // Write features to obj format for postprocessing
+    writeObj            yes;
 }
 
 

tutorials/mesh/snappyHexMesh/flange/system/surfaceFeatureExtractDict

@@ -19,19 +19,16 @@ flange.stl
     // How to obtain raw features (extractFromFile || extractFromSurface)
     extractionMethod    extractFromSurface;
 
-    extractFromSurfaceCoeffs
-    {
-        // Mark edges whose adjacent surface normals are at an angle less
-        // than includedAngle as features
-        // - 0  : selects no edges
-        // - 180: selects all edges
-        includedAngle   150;
-    }
+    // Mark edges whose adjacent surface normals are at an angle less
+    // than includedAngle as features
+    // - 0  : selects no edges
+    // - 180: selects all edges
+    includedAngle       150;
 
     // Write options
 
-        // Write features to obj format for postprocessing
-        writeObj                yes;
+    // Write features to obj format for postprocessing
+    writeObj            yes;
 }
 
 

tutorials/multiphase/interDyMFoam/RAS/DTCHull/system/surfaceFeatureExtractDict

@@ -19,14 +19,11 @@ DTC-scaled.stl
     // How to obtain raw features (extractFromFile || extractFromSurface)
     extractionMethod    extractFromSurface;
 
-    extractFromSurfaceCoeffs
-    {
-        // Mark edges whose adjacent surface normals are at an angle less
-        // than includedAngle as features
-        // - 0  : selects no edges
-        // - 180: selects all edges
-        includedAngle   150;
-    }
+    // Mark edges whose adjacent surface normals are at an angle less
+    // than includedAngle as features
+    // - 0  : selects no edges
+    // - 180: selects all edges
+    includedAngle       150;
 
     subsetFeatures
     {
@@ -40,8 +37,8 @@ DTC-scaled.stl
 
     // Write options
 
-        // Write features to obj format for postprocessing
-        writeObj                yes;
+    // Write features to obj format for postprocessing
+    writeObj            yes;
 }
 
 

tutorials/multiphase/interDyMFoam/RAS/mixerVesselAMI/system/surfaceFeatureExtractDict

@@ -14,24 +14,23 @@ FoamFile
 }
 // * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
 
+// includedAngle:
+// Mark edges whose adjacent surface normals are at an angle less
+// than includedAngle as features
+// - 0  : selects no edges
+// - 180: selects all edges
+
 vessel.stl
 {
     // How to obtain raw features (extractFromFile || extractFromSurface)
     extractionMethod    extractFromSurface;
 
-    extractFromSurfaceCoeffs
-    {
-        // Mark edges whose adjacent surface normals are at an angle less
-        // than includedAngle as features
-        // - 0  : selects no edges
-        // - 180: selects all edges
-        includedAngle   120;
-    }
+    includedAngle       120;
 
     // Write options
 
-        // Write features to obj format for postprocessing
-        writeObj                no;
+    // Write features to obj format for postprocessing
+    writeObj            no;
 }
 
 gasInlet.stl
@@ -39,36 +38,27 @@ gasInlet.stl
 
     extractionMethod    extractFromSurface;
 
-    extractFromSurfaceCoeffs
-    {
-        includedAngle   120;
-    }
+    includedAngle       120;
 
-    writeObj                no;
+    writeObj            no;
 }
 
 stirrer.stl
 {
     extractionMethod    extractFromSurface;
 
-    extractFromSurfaceCoeffs
-    {
-        includedAngle   120;
-    }
+    includedAngle       120;
 
-    writeObj                no;
+    writeObj            no;
 }
 
 outlet.stl
 {
     extractionMethod    extractFromSurface;
 
-    extractFromSurfaceCoeffs
-    {
-        includedAngle   120;
-    }
+    includedAngle       120;
 
-    writeObj                no;
+    writeObj            no;
 }
 
 /*
@@ -76,36 +66,27 @@ baffles.stl
 {
     extractionMethod    extractFromSurface;
 
-    extractFromSurfaceCoeffs
-    {
-        includedAngle   120;
-    }
+    includedAngle       120;
 
-    writeObj                no;
+    writeObj            no;
 }
 
 rotating.stl
 {
     extractionMethod    extractFromSurface;
 
-    extractFromSurfaceCoeffs
-    {
-        includedAngle   120;
-    }