OpenFOAM-plus issueshttps://develop.openfoam.com/Development/OpenFOAM-plus/-/issues2016-05-06T11:56:35Zhttps://develop.openfoam.com/Development/OpenFOAM-plus/-/issues/53MD2014: feature request: placeholder2016-05-06T11:56:35ZPrashant SonakarMD2014: feature request: placeholderPlaceholder for feature requested on exchange platform: ID 90
Definition by sampledSurface for fluxSummary
@MattijsPlaceholder for feature requested on exchange platform: ID 90
Definition by sampledSurface for fluxSummary
@MattijsAndrew HeatherAndrew Heatherhttps://develop.openfoam.com/Development/OpenFOAM-plus/-/issues/62BUG / Limitation: redistributePar with fields2017-03-16T05:46:11ZPrashant SonakarBUG / Limitation: redistributePar with fieldsThe redistribution works well, however, if there are some *Level (e.g. pointLevel) or sets (e.g. cellSet from checkMesh) fields present, they might not get properly distributed/updated.
This may lead to failure for subsequent renumber...The redistribution works well, however, if there are some *Level (e.g. pointLevel) or sets (e.g. cellSet from checkMesh) fields present, they might not get properly distributed/updated.
This may lead to failure for subsequent renumberMesh tool etc...
Attached Allrun script and files to be used with incompressible/simpleFoam/motorBike case to replicate the issue.
[Allrun](/uploads/55619b75c2a95e9ec8444230e86ff63c/Allrun)
[decomposeParDict_8](/uploads/e0cc7071ccbe0aa6e584a1bc23b75aae/decomposeParDict_8)
@Sergio @Mattijs
Andrew HeatherAndrew Heatherhttps://develop.openfoam.com/Development/OpenFOAM-plus/-/issues/72ENH: Add keepPatches as example2016-03-28T04:31:46ZPrashant SonakarENH: Add keepPatches as exampleAdd keepPatches and explanaton for using "old" behavior of SHM in
$FOAM_APP/utilities/mesh/generation/snappyHexMesh/snappyHexMeshDict
@andy @Sergio Add keepPatches and explanaton for using "old" behavior of SHM in
$FOAM_APP/utilities/mesh/generation/snappyHexMesh/snappyHexMeshDict
@andy @Sergio Mattijs Janssens4-Mattijs@users.noreply.develop.openfoam.comMattijs Janssens4-Mattijs@users.noreply.develop.openfoam.comhttps://develop.openfoam.com/Development/OpenFOAM-plus/-/issues/73No repository for Dockerfile2016-05-06T12:01:42ZJoe BorgNo repository for DockerfileThere should be one, that's linked to Docker Hub. I would like to make some improvements to the Docker ecosystem.There should be one, that's linked to Docker Hub. I would like to make some improvements to the Docker ecosystem.Pawan GhildiyalPawan Ghildiyalhttps://develop.openfoam.com/Development/OpenFOAM-plus/-/issues/85Feature request: Relative Velocity Resistance Formulation2016-04-22T04:38:53ZErikFeature request: Relative Velocity Resistance FormulationHi!
As far as I can tell, the porous zone model currently uses the stationary velocity for resistance calculation in porous media, even when it is applied to a zone that has been given a non-zero rotational velocity using the MRF mode...Hi!
As far as I can tell, the porous zone model currently uses the stationary velocity for resistance calculation in porous media, even when it is applied to a zone that has been given a non-zero rotational velocity using the MRF model. I would like to see an expansion of the porous model to allow prediction of the resistance in the relative frame, meaning that the fluid would feel the rotation of the porous medium. This would optimally work in the same way as the "Relative Velocity Resistance Formulation" provided in ANSYS Fluent.
/ ErikAndrew HeatherAndrew Heatherhttps://develop.openfoam.com/Development/OpenFOAM-plus/-/issues/117Feature Request: residuals from the matrix solver direcly via the solverPerfo...2016-05-06T12:06:12ZPrashant SonakarFeature Request: residuals from the matrix solver direcly via the solverPerformance libe.g. momentum residual
@Sergio @mark @Mattijs e.g. momentum residual
@Sergio @mark @Mattijs Andrew HeatherAndrew Heatherhttps://develop.openfoam.com/Development/OpenFOAM-plus/-/issues/130ENH: Extend the foamSystemCheck to include dependencies2017-03-16T08:30:39ZPrashant SonakarENH: Extend the foamSystemCheck to include dependenciesIt might be good to simply execute a script to check any missing dependencies than stating long list in release note.
It would also help non-IT expert to know the missing items.
e.g. flex, bison, cmake, zlib etc could be added to t...It might be good to simply execute a script to check any missing dependencies than stating long list in release note.
It would also help non-IT expert to know the missing items.
e.g. flex, bison, cmake, zlib etc could be added to this system test.
This should assist installation by also listing dependencies required in ThirdParty folder (if any)
@wyldckat @Mattijs @mark @Pawan Andrew HeatherAndrew Heatherhttps://develop.openfoam.com/Development/OpenFOAM-plus/-/issues/131ENH: runTimePostProcessing text output with 'timeStamp'2016-06-14T07:50:33ZPrashant SonakarENH: runTimePostProcessing text output with 'timeStamp'It would be good to have time stamp on images to get the animation later-on.It would be good to have time stamp on images to get the animation later-on.Andrew HeatherAndrew Heatherhttps://develop.openfoam.com/Development/OpenFOAM-plus/-/issues/138writePrecision for sampled items2017-09-27T08:49:24ZMattijs Janssens4-Mattijs@users.noreply.develop.openfoam.comwritePrecision for sampled itemswritePrecision is definable for FOs but not
- surface writers (except for VTK; Ensight not possible)
- set writers
We could e.g. use IOstream::defaultPrecision which even without a runTime (e.g. surfaceConvert) still is set from etc/c...writePrecision is definable for FOs but not
- surface writers (except for VTK; Ensight not possible)
- set writers
We could e.g. use IOstream::defaultPrecision which even without a runTime (e.g. surfaceConvert) still is set from etc/controlDict to 7.https://develop.openfoam.com/Development/OpenFOAM-plus/-/issues/193BUG: deviation in results with effectivenessHeatExchangerSource2019-01-08T15:56:40ZPrashant SonakarBUG: deviation in results with effectivenessHeatExchangerSourceAttached example case in v1606+ [withHX.tgz](/uploads/da4ae6128d30fd69ddb8d3fa72986b9b/withHX.tgz)
and results from fluent (node based ensight export) [HX_test_ENS_node.tgz](/uploads/213933b51677b238b0abced916cad747/HX_test_ENS_node.t...Attached example case in v1606+ [withHX.tgz](/uploads/da4ae6128d30fd69ddb8d3fa72986b9b/withHX.tgz)
and results from fluent (node based ensight export) [HX_test_ENS_node.tgz](/uploads/213933b51677b238b0abced916cad747/HX_test_ENS_node.tgz)
showing the deviation about 15 deg in temperature. @internal Version v1612Pawan GhildiyalPawan Ghildiyalhttps://develop.openfoam.com/Development/OpenFOAM-plus/-/issues/223snappyHexMesh with -region2016-09-28T16:00:26ZMattijs Janssens4-Mattijs@users.noreply.develop.openfoam.comsnappyHexMesh with -regionsnappyHexMesh (since starts off from initial mesh) should support -regionsnappyHexMesh (since starts off from initial mesh) should support -regionhttps://develop.openfoam.com/Development/OpenFOAM-plus/-/issues/224ENH: runTime calculation of (dp/dt)^22016-09-30T11:17:51ZPrashant SonakarENH: runTime calculation of (dp/dt)^2Feature request from EP#247
Enable calculation of (dp/dt)^2 as FO
@andyFeature request from EP#247
Enable calculation of (dp/dt)^2 as FO
@andyVersion v1612Mark OLESENMark OLESENhttps://develop.openfoam.com/Development/OpenFOAM-plus/-/issues/229ENH: add option to surfaceCheck to make optional writing of OBJ files2016-10-04T09:40:51ZPrashant SonakarENH: add option to surfaceCheck to make optional writing of OBJ filesRequested at EP#254
A low quality input geometry could produce thousand's or more error element OBJs.
It would be nice to make such file writing optional.
@markRequested at EP#254
A low quality input geometry could produce thousand's or more error element OBJs.
It would be nice to make such file writing optional.
@markVersion v1612Mattijs Janssens4-Mattijs@users.noreply.develop.openfoam.comMattijs Janssens4-Mattijs@users.noreply.develop.openfoam.comhttps://develop.openfoam.com/Development/OpenFOAM-plus/-/issues/235ENH: runTime calculation of zeroGradient volume fields2016-11-14T07:21:54ZMark OLESENENH: runTime calculation of zeroGradient volume fieldsFeature request from EP#260
Function-object to extrapolate internal field to walls, for post-processing.
@PrashantFeature request from EP#260
Function-object to extrapolate internal field to walls, for post-processing.
@PrashantVersion v1612Mark OLESENMark OLESEN2016-09-22https://develop.openfoam.com/Development/OpenFOAM-plus/-/issues/246Add sudo to docker container2017-09-27T08:49:25ZBernhard GschaiderAdd sudo to docker containerIn the install script /etc/profile.d is projected into the container. Which is great because that way a non-root access for installing software etc could be set up. Problem is that sudo currently is not installed in the container.In the install script /etc/profile.d is projected into the container. Which is great because that way a non-root access for installing software etc could be set up. Problem is that sudo currently is not installed in the container.Pawan GhildiyalPawan Ghildiyalhttps://develop.openfoam.com/Development/OpenFOAM-plus/-/issues/291BUG: decaying isotropic turbulence case2016-11-07T06:27:32ZPrashant SonakarBUG: decaying isotropic turbulence casePlaceholder to revisit boxTurb for decaying isotropic turbulence case, which doesn't seem to give correct results.
(From EP#262)Placeholder to revisit boxTurb for decaying isotropic turbulence case, which doesn't seem to give correct results.
(From EP#262)Sergio FerrarisSergio Ferrarishttps://develop.openfoam.com/Development/OpenFOAM-plus/-/issues/300ENH: feature for porous media depth2016-11-22T07:45:04ZPrashant SonakarENH: feature for porous media depthReference from EP-288
Reference from EP-288
Andrew HeatherAndrew Heatherhttps://develop.openfoam.com/Development/OpenFOAM-plus/-/issues/313ENH: resultName not applicable for new mag field expression2018-05-29T05:39:49ZPrashant SonakarENH: resultName not applicable for new mag field expression```
mag(U)
{
type mag;
libs ( "libfieldFunctionObjects.so" );
field U;
executeControl writeTime;
writeControl writeTime;
fields 1 ( U );...```
mag(U)
{
type mag;
libs ( "libfieldFunctionObjects.so" );
field U;
executeControl writeTime;
writeControl writeTime;
fields 1 ( U );
}
```
doesn't seem to support resultName and leads to mag(U)Andrew HeatherAndrew Heatherhttps://develop.openfoam.com/Development/OpenFOAM-plus/-/issues/314mergeOrSplitBaffles cannot operate on selected set of patches2018-05-29T05:39:49ZMattijs Janssens4-Mattijs@users.noreply.develop.openfoam.commergeOrSplitBaffles cannot operate on selected set of patchesmergeOrSplitBaffles can only operate on all boundary faces.mergeOrSplitBaffles can only operate on all boundary faces.Mattijs Janssens4-Mattijs@users.noreply.develop.openfoam.comMattijs Janssens4-Mattijs@users.noreply.develop.openfoam.comhttps://develop.openfoam.com/Development/OpenFOAM-plus/-/issues/321ENH: New LES delta2018-05-29T05:39:49ZPrashant SonakarENH: New LES deltaPlease add a new LES delta which takes maximum of
- cubeRootVol and
- maxDeltaxyz
Reference : EP#297
@RogerPlease add a new LES delta which takes maximum of
- cubeRootVol and
- maxDeltaxyz
Reference : EP#297
@RogerSergio FerrarisSergio Ferraris