OpenFOAM-plus issueshttps://develop.openfoam.com/Development/OpenFOAM-plus/-/issues2019-02-07T17:21:24Zhttps://develop.openfoam.com/Development/OpenFOAM-plus/-/issues/1197Add grids to foamMonitor (gnuplot)2019-02-07T17:21:24ZRoger AlmenarAdd grids to foamMonitor (gnuplot)It would be good to add an option to foamMonitor, like "-g|--grid", to plot the background grid to the monitoring plots, so that it is easier to identify the trends and values.
In gnuplot, it is enough to add a "set grid" line to the gnu...It would be good to add an option to foamMonitor, like "-g|--grid", to plot the background grid to the monitoring plots, so that it is easier to identify the trends and values.
In gnuplot, it is enough to add a "set grid" line to the gnuplot file.v1906https://develop.openfoam.com/Development/OpenFOAM-plus/-/issues/1143reconstructPar crashes with cyclicAMI2019-01-07T12:53:24ZRiccardo RossireconstructPar crashes with cyclicAMIIn a case using cyclicAMI to make the grid periodic across two patches, the simulation runs successfully but crashes when trying to reconstruct the solution at the end of the parallel run, giving the following error:
AMI: Creating addre...In a case using cyclicAMI to make the grid periodic across two patches, the simulation runs successfully but crashes when trying to reconstruct the solution at the end of the parallel run, giving the following error:
AMI: Creating addressing and weights between 66 source faces and 45 target faces
--> FOAM Warning :
From function void Foam::AMIMethod<SourcePatch, TargetPatch>::checkPatches() const [with SourcePatch = Foam::PrimitivePatch<Foam::face, Foam::SubList, const Foam::Field<Foam::Vector<double>> &, Foam::Vector<double>>, TargetPatch = Foam::PrimitivePatch<Foam::face, Foam::SubList, const Foam::Field<Foam::Vector<double>> &, Foam::Vector<double>>]
in file lnInclude/AMIMethod.C at line 57
Source and target patch bounding boxes are not similar
source box span : (0.05 0 0.001)
target box span : (0.0449116 0 0.001)
source box : (-0.05 -0.00965 -0.0015) (1.92091e-11 -0.00965 -0.0005)
target box : (-0.05 -0.00965 -0.0015) (-0.00508841 -0.00965 -0.0005)
inflated target box : (-0.0522461 -0.0118961 -0.00374614) (-0.00284227 -0.00740386 0.00174614)
The same case works fine with an older grid differing only by few cells in the total count.
Please also note this issue has been reported but not solved here:
https://bugs.openfoam.org/view.php?id=1234
and discussed here on CFD online:
https://www.cfd-online.com/Forums/openfoam-solving/100325-problems-using-reconstructpar-case-involving-ami.html
The issue has been tested and rises with both the v1806 and v1606 releases.v1906Kutalmış BerçinKutalmış Berçinhttps://develop.openfoam.com/Development/OpenFOAM-plus/-/issues/1129paraFoam displays 'internalMesh' after any patch groups in the 'Mesh Parts' s...2018-12-19T11:30:09ZMattijs Janssens4-Mattijs@users.noreply.develop.openfoam.comparaFoam displays 'internalMesh' after any patch groups in the 'Mesh Parts' selectioninternalMesh used to be first. Is this wanted?internalMesh used to be first. Is this wanted?v1906Mark OLESENMark OLESENhttps://develop.openfoam.com/Development/OpenFOAM-plus/-/issues/1130update comment in tabulatedAccelerationSource2018-12-19T08:58:02ZHenning Scheuflerupdate comment in tabulatedAccelerationSourceInformation about the file structure were missing in the comments and the documentation seems outdated:
https://www.openfoam.com/documentation/cpp-guide/html/guide-fvoptions-sources-tabulated-acceleration.html
```
Usage
Example usa...Information about the file structure were missing in the comments and the documentation seems outdated:
https://www.openfoam.com/documentation/cpp-guide/html/guide-fvoptions-sources-tabulated-acceleration.html
```
Usage
Example usage:
\verbatim
SBM
{
type tabulatedAccelerationSource;
active yes;
timeDataFileName "constant/acceleration-terms.dat";
}
cat constant/acceleration-terms.dat:
2
( t acc omega dOmegadt
(0.0 ((1 0 0) (0 0 0) (0 0 0)))
(10 ((2 0 0) (0 0 0) (0 0 0)))
)
t = time [s]
acc = acceleration vector [m/s2]
omega = rotation vector [rad/s]
dOmegadt = angular acceleration [rad/s2]
details see tabulatedAccelerationSourceTemplates.C
\endverbatim
```v1906Kutalmış BerçinKutalmış Berçinhttps://develop.openfoam.com/Development/OpenFOAM-plus/-/issues/1126function object properties can only handle a single output2018-12-14T18:18:56ZMark OLESENfunction object properties can only handle a single outputthe sampled surfaces function object can contain several surfaces, but when it only has a single property to save the information. Eg,
Input:
```
plane0
{
type surfaces;
...
surfaces
(
planeA { ... }
...the sampled surfaces function object can contain several surfaces, but when it only has a single property to save the information. Eg,
Input:
```
plane0
{
type surfaces;
...
surfaces
(
planeA { ... }
planeB { ... }
);
```
uniform/functionObjects/functionObjectProperties
```
plane0
{
U
{
file "<case>/postProcessing/plane0/0.03/U_planeB.vtk";
}
}
```
possibly relevant for #1091 @andyv1906