Unit tests: 06-06-2018

• multiphase/interDyMFoam/RAS/motorBike should move to interFoam
• multiphase/interFoam/RAS/DTCHullWave :
  • inlet BC expects entry 'value' - field alpha.water
  • call for setWaves application, which doesn't exist
• lagrangian/reactingParcelFoam/verticalChannelLTS : solver exit with maxIter 100

unconfirmed completions

• compressible/rhoSimpleFoam/gasMixing/injectorPipe: solver

cases run at /home/alex2/prashant/OpenFOAM/OpenFOAM-plus.feature-xxx/tutorialsTest

@andy @Mattijs @mark @Sergio

mentioned in commit 8f400c13

Moved interDyMFoam motorBike tutorial. It'll still fail but that is a separate issue (857).

interDyMFoam motorBike tutorial: I switched off mergePatchFaces and it runs.

multiphase/interFoam/RAS/DTCHullWave : added value but still needs setWaves

lagrangian/reactingParcelFoam/verticalChannelLTS: It runs fine

compressible/rhoSimpleFoam/gasMixing/injectorPipe: Problem with FO surfMeshes. (sampledTriSurfaceMesh). The case runs fine. Error:

Foam::surfMeshSampleDiscrete::sample

NOTE: For the interDyMFoam motorBike, I needed to set addLayers false in the snappy dictionary

I pushed the stabilizationScheme FO. I added it to the motorBike tutorial as it is the best one to show it.

@Sergio Can you add it to another case instead?

I think it is a good example and it converges to the same values with a more linear scheme. Do you think it is not a good tutorial?

Is good testcase but used in all trainings so we don't want to modify it.

Few failures for inconsistent dimensions LHS != RHS during solver

• compressible/rhoPimpleFoam/LES/pitzDaily
• compressible/rhoPimpleFoam/laminar/sineWaveDamping
• incompressible/shallowWaterFoam/squareBump

mentioned in commit 5a127183

dimensions are corrected by commit 17a8b1b8

mentioned in commit 4c1da35d

Moved stabilisation to steady-state initialisation of LES motorBike tutorial.

fileHandler - collated as well as masterUncollated form: fails in

• heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater
• multiphase/interFoam/RAS/motorBike
• mesh/parallel/cavity
• mesh/parallel/filter

Basically the redistributePar fails causing other subsequent utilities to fail.

redistributePar+collated : reported as #806

• incompressible/lumpedPointMotion/building/steady/system/controlDict : Please correct application name
• incompressible/lumpedPointMotion/building/transient: Add a 'End' to parse successful completion of lumpedPointMovement

• Please revisit the output for icoReactingMultiPhaseInterFoam/solidMelting2D

Selecting porousModel for : VollerPrakash
Selecting interfaceCompositionModel for (solid to liquid): Lee<heSolidThermo<pureMixture<constIso<hConst<rhoConst<specie>>,sensibleEnthalpy>>>,heRhoThermo<pureMixture<const<hConst<Boussinesq<specie>>,sensibleEnthalpy>>>>
Selecting turbulence model type laminar

• solidMelting2D tutorial : fails in parallel (e.g. copy motorBike tutorial decomposeParDict)
• inertMultiphaseMultiComponent tutorial: setFields refer to non existing CoO2.gas
• optional adding icoReactingMultiPhaseInterFoam -dry-run in this or next release

mentioned in commit 55dfe912

• in createBaffle utility it is referring to field while creation

--> FOAM FATAL ERROR:
cannot find file "/scratch-mstr/pss/projects/tutorialsTest/heatTransfer/buoyantSimpleFoam/circuitBoardCooling/constant/baffle3DRegion/thermophysicalProperties

solidMelting2D : turbulence->divDevRhoReff(U) shows up under valgrind, in particular the diagonal:

DebugVar(turbulence->divDevRhoReff(U)().diag());

• also happens non-parallel
• case is laminar