meshRefinementGapRefine.C 51 KB
Newer Older
1
2
3
4
/*---------------------------------------------------------------------------*\
  =========                 |
  \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
   \\    /   O peration     |
OpenFOAM bot's avatar
OpenFOAM bot committed
5
6
7
8
    \\  /    A nd           | Copyright (C) 2015-2016 OpenCFD Ltd.
     \\/     M anipulation  |
-------------------------------------------------------------------------------
                            | Copyright (C) 2015 OpenFOAM Foundation
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
-------------------------------------------------------------------------------
License
    This file is part of OpenFOAM.

    OpenFOAM is free software: you can redistribute it and/or modify it
    under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.

    OpenFOAM is distributed in the hope that it will be useful, but WITHOUT
    ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
    FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
    for more details.

    You should have received a copy of the GNU General Public License
    along with OpenFOAM.  If not, see <http://www.gnu.org/licenses/>.

\*---------------------------------------------------------------------------*/

#include "meshRefinement.H"
#include "Time.H"
#include "refinementSurfaces.H"
#include "refinementFeatures.H"
#include "shellSurfaces.H"
#include "triSurfaceMesh.H"
#include "treeDataCell.H"
#include "searchableSurfaces.H"
#include "DynamicField.H"
37
38
39
40
#include "transportData.H"
#include "FaceCellWave.H"
#include "volFields.H"
#include "zeroGradientFvPatchFields.H"
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78

// * * * * * * * * * * * * * Private Member Functions  * * * * * * * * * * * //

Foam::label Foam::meshRefinement::markSurfaceGapRefinement
(
    const scalar planarCos,

    const label nAllowRefine,
    const labelList& neiLevel,
    const pointField& neiCc,

    labelList& refineCell,
    label& nRefine
) const
{
    const labelList& cellLevel = meshCutter_.cellLevel();
    const pointField& cellCentres = mesh_.cellCentres();

    // Get the gap level for the shells
    const labelList maxLevel(shells_.maxGapLevel());

    label oldNRefine = nRefine;

    if (max(maxLevel) > 0)
    {
        // Use cached surfaceIndex_ to detect if any intersection. If so
        // re-intersect to determine level wanted.

        // Collect candidate faces
        // ~~~~~~~~~~~~~~~~~~~~~~~

        labelList testFaces(getRefineCandidateFaces(refineCell));

        // Collect segments
        // ~~~~~~~~~~~~~~~~

        pointField start(testFaces.size());
        pointField end(testFaces.size());
79
80
81
82
83
84
85
86
87
88
89
90
        {
            labelList minLevel(testFaces.size());
            calcCellCellRays
            (
                neiCc,
                neiLevel,
                testFaces,
                start,
                end,
                minLevel
            );
        }
91
92
93
94


        // Collect cells to test for inside/outside in shell
        labelList cellToCompact(mesh_.nCells(), -1);
95
        labelList bFaceToCompact(mesh_.nBoundaryFaces(), -1);
96
        List<FixedList<label, 3>> shellGapInfo;
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
        List<volumeType> shellGapMode;
        {
            DynamicField<point> compactToCc(mesh_.nCells()/10);
            DynamicList<label> compactToLevel(compactToCc.capacity());
            forAll(testFaces, i)
            {
                label faceI = testFaces[i];
                label own = mesh_.faceOwner()[faceI];
                if (cellToCompact[own] == -1)
                {
                    cellToCompact[own] = compactToCc.size();
                    compactToCc.append(cellCentres[own]);
                    compactToLevel.append(cellLevel[own]);
                }
                if (mesh_.isInternalFace(faceI))
                {
                    label nei = mesh_.faceNeighbour()[faceI];
                    if (cellToCompact[nei] == -1)
                    {
                        cellToCompact[nei] = compactToCc.size();
                        compactToCc.append(cellCentres[nei]);
                        compactToLevel.append(cellLevel[nei]);
                    }
                }
                else
                {
                    label bFaceI = faceI - mesh_.nInternalFaces();
                    if (bFaceToCompact[bFaceI] == -1)
                    {
                        bFaceToCompact[bFaceI] = compactToCc.size();
                        compactToCc.append(neiCc[bFaceI]);
                        compactToLevel.append(neiLevel[bFaceI]);
                    }
                }
            }

            shells_.findHigherGapLevel
            (
                compactToCc,
                compactToLevel,
                shellGapInfo,
                shellGapMode
            );
        }


143
        const List<FixedList<label, 3>>& extendedGapLevel =
144
145
146
147
            surfaces_.extendedGapLevel();
        const List<volumeType>& extendedGapMode =
            surfaces_.extendedGapMode();

148
149
150
151
        labelList ccSurface1;
        List<pointIndexHit> ccHit1;
        labelList ccRegion1;
        vectorField ccNormal1;
152
153

        {
154
155
156
157
            labelList ccSurface2;
            List<pointIndexHit> ccHit2;
            labelList ccRegion2;
            vectorField ccNormal2;
158
159
160
161
162
163
164

            surfaces_.findNearestIntersection
            (
                identity(surfaces_.surfaces().size()),
                start,
                end,

165
166
167
168
                ccSurface1,
                ccHit1,
                ccRegion1,
                ccNormal1,
169

170
171
172
173
                ccSurface2,
                ccHit2,
                ccRegion2,
                ccNormal2
174
175
176
            );
        }

177
178
179
180
181
182
        start.clear();
        end.clear();

        DynamicField<point> rayStart(2*ccSurface1.size());
        DynamicField<point> rayEnd(2*ccSurface1.size());
        DynamicField<scalar> gapSize(2*ccSurface1.size());
183

184
185
186
        DynamicField<point> rayStart2(2*ccSurface1.size());
        DynamicField<point> rayEnd2(2*ccSurface1.size());
        DynamicField<scalar> gapSize2(2*ccSurface1.size());
187

188
189
        DynamicList<label> cellMap(2*ccSurface1.size());
        DynamicList<label> compactMap(2*ccSurface1.size());
190

191
        forAll(ccSurface1, i)
192
        {
193
            label surfI = ccSurface1[i];
194
195
196

            if (surfI != -1)
            {
197
198
                label globalRegionI =
                    surfaces_.globalRegion(surfI, ccRegion1[i]);
199
200

                label faceI = testFaces[i];
201
                const point& surfPt = ccHit1[i].hitPoint();
202
203

                label own = mesh_.faceOwner()[faceI];
204
205
206
207
208
                if
                (
                    cellToCompact[own] != -1
                 && shellGapInfo[cellToCompact[own]][2] > 0
                )
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
                {
                    // Combine info from shell and surface
                    label compactI = cellToCompact[own];
                    FixedList<label, 3> gapInfo;
                    volumeType gapMode;
                    mergeGapInfo
                    (
                        shellGapInfo[compactI],
                        shellGapMode[compactI],
                        extendedGapLevel[globalRegionI],
                        extendedGapMode[globalRegionI],
                        gapInfo,
                        gapMode
                    );

                    const point& cc = cellCentres[own];
225
                    label nRays = generateRays
226
227
228
                    (
                        false,
                        surfPt,
229
                        ccNormal1[i],
230
231
                        gapInfo,
                        gapMode,
232
                        surfPt+((cc-surfPt)&ccNormal1[i])*ccNormal1[i],
233
234
                        cellLevel[own],

235
236
237
                        rayStart,
                        rayEnd,
                        gapSize,
238

239
240
241
242
243
                        rayStart2,
                        rayEnd2,
                        gapSize2
                    );
                    for (label j = 0; j < nRays; j++)
244
                    {
245
246
                        cellMap.append(own);
                        compactMap.append(i);
247
248
249
250
251
                    }
                }
                if (mesh_.isInternalFace(faceI))
                {
                    label nei = mesh_.faceNeighbour()[faceI];
252
253
254
255
256
                    if
                    (
                        cellToCompact[nei] != -1
                     && shellGapInfo[cellToCompact[nei]][2] > 0
                    )
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
                    {
                        // Combine info from shell and surface
                        label compactI = cellToCompact[nei];
                        FixedList<label, 3> gapInfo;
                        volumeType gapMode;
                        mergeGapInfo
                        (
                            shellGapInfo[compactI],
                            shellGapMode[compactI],
                            extendedGapLevel[globalRegionI],
                            extendedGapMode[globalRegionI],
                            gapInfo,
                            gapMode
                        );

                        const point& cc = cellCentres[nei];
273
                        label nRays = generateRays
274
275
276
                        (
                            false,
                            surfPt,
277
                            ccNormal1[i],
278
279
                            gapInfo,
                            gapMode,
280
                            surfPt+((cc-surfPt)&ccNormal1[i])*ccNormal1[i],
281
282
                            cellLevel[nei],

283
284
285
                            rayStart,
                            rayEnd,
                            gapSize,
286

287
288
289
290
291
                            rayStart2,
                            rayEnd2,
                            gapSize2
                        );
                        for (label j = 0; j < nRays; j++)
292
                        {
293
294
                            cellMap.append(nei);
                            compactMap.append(i);
295
296
297
298
299
                        }
                    }
                }
                else
                {
300
301
302
303
                    // Note: on coupled face. What cell are we going to
                    // refine? We've got the neighbouring cell centre
                    // and level but we cannot mark it for refinement on
                    // this side...
304
305
                    label bFaceI = faceI - mesh_.nInternalFaces();

306
307
308
309
310
                    if
                    (
                        bFaceToCompact[bFaceI] != -1
                     && shellGapInfo[bFaceToCompact[bFaceI]][2] > 0
                    )
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
                    {
                        // Combine info from shell and surface
                        label compactI = bFaceToCompact[bFaceI];
                        FixedList<label, 3> gapInfo;
                        volumeType gapMode;
                        mergeGapInfo
                        (
                            shellGapInfo[compactI],
                            shellGapMode[compactI],
                            extendedGapLevel[globalRegionI],
                            extendedGapMode[globalRegionI],
                            gapInfo,
                            gapMode
                        );

                        const point& cc = neiCc[bFaceI];
327
                        label nRays = generateRays
328
329
330
                        (
                            false,
                            surfPt,
331
                            ccNormal1[i],
332
333
                            gapInfo,
                            gapMode,
334
                            surfPt+((cc-surfPt)&ccNormal1[i])*ccNormal1[i],
335
336
                            neiLevel[bFaceI],

337
338
339
                            rayStart,
                            rayEnd,
                            gapSize,
340

341
342
343
344
345
                            rayStart2,
                            rayEnd2,
                            gapSize2
                        );
                        for (label j = 0; j < nRays; j++)
346
                        {
347
348
                            cellMap.append(-1); // See above.
                            compactMap.append(i);
349
350
351
352
353
354
                        }
                    }
                }
            }
        }

355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
        Info<< "Shooting " << returnReduce(rayStart.size(), sumOp<label>())
            << " rays from " << returnReduce(testFaces.size(), sumOp<label>())
            << " intersected faces" << endl;

        rayStart.shrink();
        rayEnd.shrink();
        gapSize.shrink();

        rayStart2.shrink();
        rayEnd2.shrink();
        gapSize2.shrink();

        cellMap.shrink();
        compactMap.shrink();

        testFaces.clear();
        ccSurface1.clear();
        ccHit1.clear();
        ccRegion1.clear();
        ccNormal1 = UIndirectList<vector>(ccNormal1, compactMap)();


        // Do intersections in pairs
        labelList surf1;
        List<pointIndexHit> hit1;
        vectorField normal1;
381
382
        surfaces_.findNearestIntersection
        (
383
384
385
386
387
            rayStart,
            rayEnd,
            surf1,
            hit1,
            normal1
388
389
        );

390
391
392
393
394
395
396
397
398
399
400
        labelList surf2;
        List<pointIndexHit> hit2;
        vectorField normal2;
        surfaces_.findNearestIntersection
        (
            rayStart2,
            rayEnd2,
            surf2,
            hit2,
            normal2
        );
401

402
        forAll(surf1, i)
403
        {
404
            if (surf1[i] != -1 && surf2[i] != -1)
405
406
407
408
            {
                // Found intersection with surface. Check opposite normal.
                label cellI = cellMap[i];

409
410
411
412
413
414
415
416
417
                if
                (
                    cellI != -1
                 && (mag(normal1[i]&normal2[i]) > planarCos)
                 && (
                        magSqr(hit1[i].hitPoint()-hit2[i].hitPoint())
                      < Foam::sqr(gapSize[i])
                    )
                )
418
419
420
421
422
                {
                    if
                    (
                       !markForRefine
                        (
423
                            surf1[i],
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
                            nAllowRefine,
                            refineCell[cellI],
                            nRefine
                        )
                    )
                    {
                        break;
                    }
                }
            }
        }

        if
        (
            returnReduce(nRefine, sumOp<label>())
          > returnReduce(nAllowRefine, sumOp<label>())
        )
        {
            Info<< "Reached refinement limit." << endl;
        }
    }

    return returnReduce(nRefine-oldNRefine, sumOp<label>());
}


//Foam::meshRefinement::findNearestOppositeOp::findNearestOppositeOp
//(
//    const indexedOctree<treeDataTriSurface>& tree,
//    const point& oppositePoint,
//    const vector& oppositeNormal,
//    const scalar minCos
//)
//:
//    tree_(tree),
//    oppositePoint_(oppositePoint),
//    oppositeNormal_(oppositeNormal),
//    minCos_(minCos)
//{}
//
//
//void Foam::meshRefinement::findNearestOppositeOp::operator()
//(
//    const labelUList& indices,
//    const point& sample,
//    scalar& nearestDistSqr,
//    label& minIndex,
//    point& nearestPoint
//) const
//{
//    const treeDataTriSurface& shape = tree_.shapes();
//    const triSurface& patch = shape.patch();
//    const pointField& points = patch.points();
//
//    forAll(indices, i)
//    {
//        const label index = indices[i];
//        const labelledTri& f = patch[index];
//
//        pointHit nearHit = f.nearestPoint(sample, points);
//        scalar distSqr = sqr(nearHit.distance());
//
//        if (distSqr < nearestDistSqr)
//        {
//            // Nearer. Check if
//            // - a bit way from other hit
//            // - in correct search cone
//            vector d(nearHit.rawPoint()-oppositePoint_);
//            scalar normalDist(d&oppositeNormal_);
//
//            if (normalDist > Foam::sqr(SMALL) && normalDist/mag(d) > minCos_)
//            {
//                nearestDistSqr = distSqr;
//                minIndex = index;
//                nearestPoint = nearHit.rawPoint();
//            }
//        }
//    }
//}
//
//
//void Foam::meshRefinement::searchCone
//(
//    const label surfI,
//    labelList& nearMap,                 // cells
//    scalarField& nearGap,               // gap size
//    List<pointIndexHit>& nearInfo,      // nearest point on surface
//    List<pointIndexHit>& oppositeInfo   // detected point on gap (or miss)
//) const
//{
//    const labelList& cellLevel = meshCutter_.cellLevel();
//    const pointField& cellCentres = mesh_.cellCentres();
//    const scalar edge0Len = meshCutter_.level0EdgeLength();
//
//    const labelList& surfaceIndices = surfaces_.surfaces();
519
//    const List<FixedList<label, 3>>& extendedGapLevel =
520
521
522
523
524
525
526
527
528
529
530
//        surfaces_.extendedGapLevel();
//    const List<volumeType>& extendedGapMode = surfaces_.extendedGapMode();
//
//
//    label geomI = surfaceIndices[surfI];
//    const searchableSurface& geom = surfaces_.geometry()[geomI];
//
//    const triSurfaceMesh& s = refCast<const triSurfaceMesh>(geom);
//    const indexedOctree<treeDataTriSurface>& tree = s.tree();
//
//
531
//    const scalar searchCos = Foam::cos(degToRad(30.0));
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
//
//    // Normals for ray shooting and inside/outside detection
//    vectorField nearNormal;
//    geom.getNormal(nearInfo, nearNormal);
//    // Regions
//    labelList nearRegion;
//    geom.getRegion(nearInfo, nearRegion);
//
//
//    // Now loop over all near points and search in the half cone
//    labelList map(nearInfo.size());
//    label compactI = 0;
//
//    oppositeInfo.setSize(nearInfo.size());
//
//    forAll(nearInfo, i)
//    {
//        label globalRegionI =
//            surfaces_.globalRegion(surfI, nearRegion[i]);
//
//        // Get updated gap information now we have the region
//        label nGapCells = extendedGapLevel[globalRegionI][0];
//        label minLevel = extendedGapLevel[globalRegionI][1];
//        label maxLevel = extendedGapLevel[globalRegionI][2];
//        volumeType mode = extendedGapMode[globalRegionI];
//
//        label cellI = nearMap[i];
//        label cLevel = cellLevel[cellI];
//
//        if (cLevel >= minLevel && cLevel < maxLevel)
//        {
563
//            scalar cellSize = edge0Len/pow(2.0, cLevel);
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
//
//            // Update gap size
//            nearGap[i] = nGapCells*cellSize;
//
//            const point& nearPt = nearInfo[i].hitPoint();
//            vector v(cellCentres[cellI]-nearPt);
//            scalar magV = mag(v);
//
//            // Like with ray shooting we want to
//            // - find triangles up to nearGap away on the wanted side of the
//            //   surface
//            // - find triangles up to 0.5*cellSize away on the unwanted side
//            //   of the surface. This is for cells straddling the surface
//            //   where
//            //   the cell centre might be on the wrong side of the surface
//
//            // Tbd: check that cell centre is inbetween the gap hits
//            // (only if the cell is far enough away)
//
//            scalar posNormalSize = 0.0;
//            scalar negNormalSize = 0.0;
//
//            if (mode == volumeType::OUTSIDE)
//            {
//                posNormalSize = nearGap[i];
//                if (magV < 0.5*cellSize)
//                {
//                    negNormalSize = 0.5*cellSize;
//                }
//            }
//            else if (mode == volumeType::INSIDE)
//            {
//                if (magV < 0.5*cellSize)
//                {
//                    posNormalSize = 0.5*cellSize;
//                }
//                negNormalSize = nearGap[i];
//            }
//            else
//            {
//                posNormalSize = nearGap[i];
//                negNormalSize = nearGap[i];
//            }
//
//            // Test with positive normal
//            oppositeInfo[compactI] = tree.findNearest
//            (
//                nearPt,
//                sqr(posNormalSize),
//                findNearestOppositeOp
//                (
//                    tree,
//                    nearPt,
//                    nearNormal[i],
//                    searchCos
//                )
//            );
//
//            if (oppositeInfo[compactI].hit())
//            {
//                map[compactI++] = i;
//            }
//            else
//            {
//                // Test with negative normal
//                oppositeInfo[compactI] = tree.findNearest
//                (
//                    nearPt,
//                    sqr(negNormalSize),
//                    findNearestOppositeOp
//                    (
//                        tree,
//                        nearPt,
//                        -nearNormal[i],
//                        searchCos
//                    )
//                );
//
//                if (oppositeInfo[compactI].hit())
//                {
//                    map[compactI++] = i;
//                }
//            }
//        }
//    }
//
//    Info<< "Selected " << returnReduce(compactI, sumOp<label>())
//        << " hits on the correct side out of "
//        << returnReduce(map.size(), sumOp<label>()) << endl;
//    map.setSize(compactI);
//    oppositeInfo.setSize(compactI);
//
656
//    nearMap = labelUIndList(nearMap, map)();
657
658
659
660
661
//    nearGap = UIndirectList<scalar>(nearGap, map)();
//    nearInfo = UIndirectList<pointIndexHit>(nearInfo, map)();
//    nearNormal = UIndirectList<vector>(nearNormal, map)();
//
//    // Exclude hits which aren't opposite enough. E.g. you might find
Andrew Heather's avatar
Andrew Heather committed
662
//    // a point on a perpendicular wall - but this does not constitute a gap.
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
//    vectorField oppositeNormal;
//    geom.getNormal(oppositeInfo, oppositeNormal);
//
//    compactI = 0;
//    forAll(oppositeInfo, i)
//    {
//        if ((nearNormal[i] & oppositeNormal[i]) < -0.707)
//        {
//            map[compactI++] = i;
//        }
//    }
//
//    Info<< "Selected " << returnReduce(compactI, sumOp<label>())
//        << " hits opposite the nearest out of "
//        << returnReduce(map.size(), sumOp<label>()) << endl;
//    map.setSize(compactI);
//
680
//    nearMap = labelUIndList(nearMap, map)();
681
682
683
684
685
686
//    nearGap = UIndirectList<scalar>(nearGap, map)();
//    nearInfo = UIndirectList<pointIndexHit>(nearInfo, map)();
//    oppositeInfo = UIndirectList<pointIndexHit>(oppositeInfo, map)();
//}


687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
Foam::label Foam::meshRefinement::generateRays
(
    const point& nearPoint,
    const vector& nearNormal,
    const FixedList<label, 3>& gapInfo,
    const volumeType& mode,

    const label cLevel,

    DynamicField<point>& start,
    DynamicField<point>& end
) const
{
    label nOldRays = start.size();

702
    if (cLevel >= gapInfo[1] && cLevel < gapInfo[2] && gapInfo[0] > 0)
703
    {
704
        scalar cellSize = meshCutter_.level0EdgeLength()/pow(2.0, cLevel);
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738

        // Calculate gap size
        scalar nearGap = gapInfo[0]*cellSize;

        const vector& n = nearNormal;

        // Situation 'C' above: cell too close. Use surface
        // -normal and -point to shoot rays

        if (mode == volumeType::OUTSIDE)
        {
            start.append(nearPoint+1e-6*n);
            end.append(nearPoint+nearGap*n);
        }
        else if (mode == volumeType::INSIDE)
        {
            start.append(nearPoint-1e-6*n);
            end.append(nearPoint-nearGap*n);
        }
        else if (mode == volumeType::MIXED)
        {
            start.append(nearPoint+1e-6*n);
            end.append(nearPoint+nearGap*n);

            start.append(nearPoint-1e-6*n);
            end.append(nearPoint-nearGap*n);
        }
    }

    return start.size()-nOldRays;
}


Foam::label Foam::meshRefinement::generateRays
739
740
741
742
743
744
745
746
747
748
749
(
    const bool useSurfaceNormal,

    const point& nearPoint,
    const vector& nearNormal,
    const FixedList<label, 3>& gapInfo,
    const volumeType& mode,

    const point& cc,
    const label cLevel,

750
751
752
753
754
755
756
    DynamicField<point>& start,
    DynamicField<point>& end,
    DynamicField<scalar>& gapSize,

    DynamicField<point>& start2,
    DynamicField<point>& end2,
    DynamicField<scalar>& gapSize2
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
) const
{
    // We want to handle the following cases:
    // - surface: small gap (marked with 'surface'). gap might be
    //            on inside or outside of surface.
    // - A: cell well inside the gap.
    // - B: cell well outside the gap.
    // - C: cell straddling the gap. cell centre might be inside
    //      or outside
    //
    //       +---+
    //       | B |
    //       +---+
    //
    //            +------+
    //            |      |
    //            |   C  |
    //    --------|------|----surface
    //            +------+
    //
    //        +---+
    //        | A |
    //        +---+
    //
    //
    //    --------------------surface
    //
    // So:
    // - find nearest point on surface
    // - in situation A,B decide if on wanted side of surface
    // - detect if locally a gap (and the cell inside the gap) by
    //   shooting a ray from the point on the surface in the direction
    //   of
    //   - A,B: the cell centre
    //   - C: the surface normal and/or negative surface normal
    //   and see we hit anything
    //
    // Variations of this scheme:
    // - always shoot in the direction of the surface normal. This needs
    //   then an additional check to make sure the cell centre is
    //   somewhere inside the gap
    // - instead of ray shooting use a 'constrained' nearest search
    //   by e.g. looking inside a search cone (implemented in searchCone).
    //   The problem with this constrained nearest is that it still uses
    //   the absolute nearest point on each triangle and only afterwards
    //   checks if it is inside the search cone.


    // Decide which near points are good:
    // - with updated minLevel and maxLevel and nearGap make sure
    //   the cell is still a candidate
    //   NOTE: inside the gap the nearest point on the surface will
    //         be HALF the gap size - otherwise we would have found
    //         a point on the opposite side
    // - if the mode is both sides
    // - or if the hit is inside the current cell (situation 'C',
    //   magV < 0.5cellSize)
    // - or otherwise if on the correct side

816
    label nOldRays = start.size();
817

818
    if (cLevel >= gapInfo[1] && cLevel < gapInfo[2] && gapInfo[0] > 0)
819
    {
820
        scalar cellSize = meshCutter_.level0EdgeLength()/pow(2.0, cLevel);
821
822
823
824
825
826
827
828
829
830
831
832
833

        // Calculate gap size
        scalar nearGap = gapInfo[0]*cellSize;

        // Distance to nearest
        vector v(cc-nearPoint);
        scalar magV = mag(v);

        if (useSurfaceNormal || magV < 0.5*cellSize)
        {
            const vector& n = nearNormal;

            // Situation 'C' above: cell too close. Use surface
834
            // -normal and -point to shoot rays
835
836
837

            if (mode == volumeType::OUTSIDE)
            {
838
839
840
841
842
843
844
                start.append(nearPoint+1e-6*n);
                end.append(nearPoint+nearGap*n);
                gapSize.append(nearGap);
                // Second vector so we get pairs of intersections
                start2.append(nearPoint+1e-6*n);
                end2.append(nearPoint-1e-6*n);
                gapSize2.append(gapSize.last());
845
846
847
            }
            else if (mode == volumeType::INSIDE)
            {
848
849
850
851
852
853
854
                start.append(nearPoint-1e-6*n);
                end.append(nearPoint-nearGap*n);
                gapSize.append(nearGap);
                // Second vector so we get pairs of intersections
                start2.append(nearPoint-1e-6*n);
                end2.append(nearPoint+1e-6*n);
                gapSize2.append(gapSize.last());
855
856
857
            }
            else if (mode == volumeType::MIXED)
            {
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
                // Do both rays:
                // Outside
                {
                    start.append(nearPoint+1e-6*n);
                    end.append(nearPoint+nearGap*n);
                    gapSize.append(nearGap);
                    // Second vector so we get pairs of intersections
                    start2.append(nearPoint+1e-6*n);
                    end2.append(nearPoint-1e-6*n);
                    gapSize2.append(gapSize.last());
                }
                // Inside
                {
                    start.append(nearPoint-1e-6*n);
                    end.append(nearPoint-nearGap*n);
                    gapSize.append(nearGap);
                    // Second vector so we get pairs of intersections
                    start2.append(nearPoint-1e-6*n);
                    end2.append(nearPoint+1e-6*n);
                    gapSize2.append(gapSize.last());
                }
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
            }
        }
        else
        {
            // Situation 'A' or 'B' above: cell well away. Test if
            // cell on correct side of surface and shoot ray through
            // cell centre. Note: no need to shoot ray in other
            // direction since we're trying to detect cell inside
            // the gap.

            scalar s = (v&nearNormal);

            if
            (
                (mode == volumeType::MIXED)
             || (mode == volumeType::OUTSIDE && s > SMALL)
             || (mode == volumeType::INSIDE && s < -SMALL)
            )
            {
898
                //// Use single vector through cell centre
899
900
901
902
903
904
905
906
907
908
909
                //vector n(v/(magV+ROOTVSMALL));
                //
                //start.append(cc);
                //end.append(cc+nearGap*n);
                //gapSize.append(nearGap);
                //
                //start2.append(cc);
                //end2.append(cc-nearGap*n);
                //gapSize2.append(nearGap);


910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
                //// Shoot some rays through the cell centre
                //// X-direction:
                //start.append(cc);
                //end.append(cc+nearGap*vector(1, 0, 0));
                //gapSize.append(nearGap);
                //
                //start2.append(cc);
                //end2.append(cc-nearGap*vector(1, 0, 0));
                //gapSize2.append(nearGap);
                //
                //// Y-direction:
                //start.append(cc);
                //end.append(cc+nearGap*vector(0, 1, 0));
                //gapSize.append(nearGap);
                //
                //start2.append(cc);
                //end2.append(cc-nearGap*vector(0, 1, 0));
                //gapSize2.append(nearGap);
                //
                //// Z-direction:
                //start.append(cc);
                //end.append(cc+nearGap*vector(0, 0, 1));
                //gapSize.append(nearGap);
                //
                //start2.append(cc);
                //end2.append(cc-nearGap*vector(0, 0, 1));
                //gapSize2.append(nearGap);


                // 3 axes aligned with normal

                // Use vector through cell centre
                vector n(v/(magV+ROOTVSMALL));

                // Get second vector. Make sure it is sufficiently perpendicular
                vector e2(1, 0, 0);
                scalar s = (e2 & n);
                if (mag(s) < 0.9)
                {
                    e2 -= s*n;
                }
                else
                {
                    e2 = vector(0, 1, 0);
                    e2 -= (e2 & n)*n;
                }
                e2 /= mag(e2);

                // Third vector
                vector e3 = n ^ e2;


                // Rays in first direction
963
                start.append(cc);
964
                end.append(cc+nearGap*n);
965
966
967
                gapSize.append(nearGap);

                start2.append(cc);
968
                end2.append(cc-nearGap*n);
969
970
                gapSize2.append(nearGap);

971
                // Rays in second direction
972
                start.append(cc);
973
                end.append(cc+nearGap*e2);
974
975
976
                gapSize.append(nearGap);

                start2.append(cc);
977
                end2.append(cc-nearGap*e2);
978
979
                gapSize2.append(nearGap);

980
                // Rays in third direction
981
                start.append(cc);
982
                end.append(cc+nearGap*e3);
983
984
985
                gapSize.append(nearGap);

                start2.append(cc);
986
                end2.append(cc-nearGap*e3);
987
                gapSize2.append(nearGap);
988
989
990
991
            }
        }
    }

992
    return start.size()-nOldRays;
993
994
995
996
997
998
999
1000
1001
}


void Foam::meshRefinement::selectGapCandidates
(
    const labelList& refineCell,
    const label nRefine,

    labelList& cellMap,
1002
    List<FixedList<label, 3>>& shellGapInfo,
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
    List<volumeType>& shellGapMode
) const
{
    const labelList& cellLevel = meshCutter_.cellLevel();
    const pointField& cellCentres = mesh_.cellCentres();

    // Collect cells to test
    cellMap.setSize(cellLevel.size()-nRefine);
    label compactI = 0;

    forAll(cellLevel, cellI)
    {
        if (refineCell[cellI] == -1)
        {
            cellMap[compactI++] = cellI;
        }
    }
    Info<< "Selected " << returnReduce(compactI, sumOp<label>())
        << " unmarked cells out of "
        << mesh_.globalData().nTotalCells() << endl;
    cellMap.setSize(compactI);

    // Do test to see whether cells are inside/outside shell with
    // applicable specification (minLevel <= celllevel < maxLevel)
    shells_.findHigherGapLevel
    (
        pointField(cellCentres, cellMap),
1030
        labelUIndList(cellLevel, cellMap)(),
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
        shellGapInfo,
        shellGapMode
    );

    // Compact out hits

    labelList map(shellGapInfo.size());
    compactI = 0;
    forAll(shellGapInfo, i)
    {
        if (shellGapInfo[i][2] > 0)
        {
            map[compactI++] = i;
        }
    }

    Info<< "Selected " << returnReduce(compactI, sumOp<label>())
        << " cells inside gap shells out of "
        << mesh_.globalData().nTotalCells() << endl;

    map.setSize(compactI);
1052
    cellMap = labelUIndList(cellMap, map)();
1053
    shellGapInfo = UIndirectList<FixedList<label, 3>>(shellGapInfo, map)();
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
    shellGapMode = UIndirectList<volumeType>(shellGapMode, map)();
}


void Foam::meshRefinement::mergeGapInfo
(
    const FixedList<label, 3>& shellGapInfo,
    const volumeType shellGapMode,
    const FixedList<label, 3>& surfGapInfo,
    const volumeType surfGapMode,
    FixedList<label, 3>& gapInfo,
    volumeType& gapMode
) const
{
    if (surfGapInfo[0] == 0)
    {
        gapInfo = shellGapInfo;
        gapMode = shellGapMode;
    }
    else if (shellGapInfo[0] == 0)
    {
        gapInfo = surfGapInfo;
        gapMode = surfGapMode;
    }
    else
    {
        // Both specify a level. Does surface level win? Or does information
        // need to be merged?

        //gapInfo[0] = max(surfGapInfo[0], shellGapInfo[0]);
        //gapInfo[1] = min(surfGapInfo[1], shellGapInfo[1]);
        //gapInfo[2] = max(surfGapInfo[2], shellGapInfo[2]);
        gapInfo = surfGapInfo;
        gapMode = surfGapMode;
    }
}


Foam::label Foam::meshRefinement::markInternalGapRefinement
(
    const scalar planarCos,
1095
    const bool spreadGapSize,
1096
1097
1098
    const label nAllowRefine,

    labelList& refineCell,
1099
1100
1101
    label& nRefine,
    labelList& numGapCells,
    scalarField& detectedGapSize
1102
1103
) const
{
1104
1105
1106
1107
1108
    detectedGapSize.setSize(mesh_.nCells());
    detectedGapSize = GREAT;
    numGapCells.setSize(mesh_.nCells());
    numGapCells = -1;

1109
1110
1111
1112
    const labelList& cellLevel = meshCutter_.cellLevel();
    const pointField& cellCentres = mesh_.cellCentres();
    const scalar edge0Len = meshCutter_.level0EdgeLength();

1113
    const List<FixedList<label, 3>>& extendedGapLevel =
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
        surfaces_.extendedGapLevel();
    const List<volumeType>& extendedGapMode = surfaces_.extendedGapMode();

    // Get the gap level for the shells
    const labelList maxLevel(shells_.maxGapLevel());

    label oldNRefine = nRefine;

    if (max(maxLevel) > 0)
    {
        // Collect cells to test
        labelList cellMap;
1126
        List<FixedList<label, 3>> shellGapInfo;
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
        List<volumeType> shellGapMode;
        selectGapCandidates
        (
            refineCell,
            nRefine,

            cellMap,
            shellGapInfo,
            shellGapMode
        );

        // Find nearest point and normal on the surfaces
        List<pointIndexHit> nearInfo;
        vectorField nearNormal;
        labelList nearSurface;
        labelList nearRegion;
        {
            // Now we have both the cell-level and the gap size information. Use
            // this to calculate the gap size
            scalarField gapSize(cellMap.size());
            forAll(cellMap, i)
            {
                label cellI = cellMap[i];
1150
                scalar cellSize = edge0Len/pow(2.0, cellLevel[cellI]);
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
                gapSize[i] = shellGapInfo[i][0]*cellSize;
            }

            surfaces_.findNearestRegion
            (
                identity(surfaces_.surfaces().size()),
                pointField(cellCentres, cellMap),
                sqr(gapSize),
                nearSurface,
                nearInfo,
                nearRegion,
                nearNormal
            );
        }



1168
1169
1170
1171
1172
1173
1174
1175
        DynamicList<label> map(nearInfo.size());
        DynamicField<point> rayStart(nearInfo.size());
        DynamicField<point> rayEnd(nearInfo.size());
        DynamicField<scalar> gapSize(nearInfo.size());

        DynamicField<point> rayStart2(nearInfo.size());
        DynamicField<point> rayEnd2(nearInfo.size());
        DynamicField<scalar> gapSize2(nearInfo.size());
1176

1177
        label nTestCells = 0;
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201

        forAll(nearInfo, i)
        {
            if (nearInfo[i].hit())
            {
                label globalRegionI = surfaces_.globalRegion
                (
                    nearSurface[i],
                    nearRegion[i]
                );

                // Combine info from shell and surface
                FixedList<label, 3> gapInfo;
                volumeType gapMode;
                mergeGapInfo
                (
                    shellGapInfo[i],
                    shellGapMode[i],
                    extendedGapLevel[globalRegionI],
                    extendedGapMode[globalRegionI],
                    gapInfo,
                    gapMode
                );

1202
1203
1204
1205
1206
1207
1208
                // Store wanted number of cells in gap
                label cellI = cellMap[i];
                label cLevel = cellLevel[cellI];
                if (cLevel >= gapInfo[1] && cLevel < gapInfo[2])
                {
                    numGapCells[cellI] = max(numGapCells[cellI], gapInfo[0]);
                }
1209

1210
1211
                // Construct one or more rays to test for oppositeness
                label nRays = generateRays
1212
1213
1214
1215
1216
1217
1218
                (
                    false,
                    nearInfo[i].hitPoint(),
                    nearNormal[i],
                    gapInfo,
                    gapMode,

1219
1220
                    cellCentres[cellI],
                    cLevel,
1221

1222
1223
1224
1225
1226
1227
1228
                    rayStart,
                    rayEnd,
                    gapSize,

                    rayStart2,
                    rayEnd2,
                    gapSize2
1229
                );
1230
                if (nRays > 0)
1231
                {
1232
1233
1234
1235
1236
                    nTestCells++;
                    for (label j = 0; j < nRays; j++)
                    {
                        map.append(i);
                    }
1237
1238
1239
1240
                }
            }
        }

1241
        Info<< "Selected " << returnReduce(nTestCells, sumOp<label>())
1242
1243
            << " cells for testing out of "
            << mesh_.globalData().nTotalCells() << endl;
1244
1245
1246
1247
1248
1249
1250
1251
        map.shrink();
        rayStart.shrink();
        rayEnd.shrink();
        gapSize.shrink();

        rayStart2.shrink();
        rayEnd2.shrink();
        gapSize2.shrink();
1252

1253
        cellMap = labelUIndList(cellMap, map)();
1254
1255
1256
1257
1258
1259
1260
1261
        nearNormal = UIndirectList<vector>(nearNormal, map)();
        shellGapInfo.clear();
        shellGapMode.clear();
        nearInfo.clear();
        nearSurface.clear();
        nearRegion.clear();


1262
1263
1264
1265
        // Do intersections in pairs
        labelList surf1;
        List<pointIndexHit> hit1;
        vectorField normal1;
1266
1267
        surfaces_.findNearestIntersection
        (
1268
1269
1270
1271
1272
            rayStart,
            rayEnd,
            surf1,
            hit1,
            normal1
1273
        );
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288

        labelList surf2;
        List<pointIndexHit> hit2;
        vectorField normal2;
        surfaces_.findNearestIntersection
        (
            rayStart2,
            rayEnd2,
            surf2,
            hit2,
            normal2
        );

        // Extract cell based gap size
        forAll(surf1, i)
1289
        {
1290
            if (surf1[i] != -1 && surf2[i] != -1)
1291
            {
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
                // Found intersections with surface. Check for
                // - small gap
                // - coplanar normals

                label cellI = cellMap[i];

                scalar d2 = magSqr(hit1[i].hitPoint()-hit2[i].hitPoint());

                if
                (
                    cellI != -1
                 && (mag(normal1[i]&normal2[i]) > planarCos)
                 && (d2 < Foam::sqr(gapSize[i]))
                )
1306
                {
1307
1308
1309
1310
1311
                    detectedGapSize[cellI] = min
                    (
                        detectedGapSize[cellI],
                        Foam::sqrt(d2)
                    );
1312
1313
1314
1315
                }
            }
        }

1316
1317
        // Spread it
        if (spreadGapSize)
1318
        {
1319
1320
1321
1322
1323
1324
            // Field on cells and faces
            List<transportData> cellData(mesh_.nCells());
            List<transportData> faceData(mesh_.nFaces());

            // Start of walk
            const pointField& faceCentres = mesh_.faceCentres();
1325

1326
1327
1328
            DynamicList<label> frontFaces(mesh_.nFaces());
            DynamicList<transportData> frontData(mesh_.nFaces());
            for (label faceI = 0; faceI < mesh_.nInternalFaces(); faceI++)
1329
            {
1330
1331
                label own = mesh_.faceOwner()[faceI];
                label nei = mesh_.faceNeighbour()[faceI];
1332

1333
1334
1335
1336
1337
                scalar minSize = min
                (
                    detectedGapSize[own],
                    detectedGapSize[nei]
                );
1338

1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
                if (minSize < GREAT)
                {
                    frontFaces.append(faceI);
                    frontData.append
                    (
                        transportData
                        (
                            faceCentres[faceI],
                            minSize,
                            0.0
                        )
                    );
                }
            }
            for
            (
                label faceI = mesh_.nInternalFaces();
                faceI < mesh_.nFaces();
                faceI++
            )
            {
                label own = mesh_.faceOwner()[faceI];

                if (detectedGapSize[own] < GREAT)
                {
                    frontFaces.append(faceI);
                    frontData.append
                    (
                        transportData
                        (
                            faceCentres[faceI],
                            detectedGapSize[own],
                            0.0
                        )
                    );
                }
            }

            Info<< "Selected "
                << returnReduce(frontFaces.size(), sumOp<label>())
                << " faces for spreading gap size out of "
                << mesh_.globalData().nTotalFaces() << endl;


1383
            transportData::trackData td(surfaceIndex());
1384
1385

            FaceCellWave<transportData, transportData::trackData> deltaCalc
1386
1387
1388
1389
1390
1391
            (
                mesh_,
                frontFaces,
                frontData,
                faceData,
                cellData,
1392
1393
                mesh_.globalData().nTotalCells()+1,
                td
1394
1395
1396
1397
1398
1399
            );


            forAll(cellMap, i)
            {
                label cellI = cellMap[i];
1400
1401
                if
                (
1402
1403
1404
                    cellI != -1
                 && cellData[cellI].valid(deltaCalc.data())
                 && numGapCells[cellI] != -1
1405
1406
                )
                {
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
                    // Update transported gap size
                    detectedGapSize[cellI] = min
                    (
                        detectedGapSize[cellI],
                        cellData[cellI].data()
                    );
                }
            }
        }


        // Use it
        forAll(cellMap, i)
        {
            label cellI = cellMap[i];

            if (cellI != -1 && numGapCells[cellI] != -1)
            {
                // Needed gap size
                label cLevel = cellLevel[cellI];
1427
1428
                scalar cellSize =
                    meshCutter_.level0EdgeLength()/pow(2.0, cLevel);
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
                scalar neededGapSize = numGapCells[cellI]*cellSize;

                if (neededGapSize > detectedGapSize[cellI])
                {
                    if
                    (
                       !markForRefine
                        (
                            123,
                            nAllowRefine,
                            refineCell[cellI],
                            nRefine
                        )
                    )
                    {
                        break;
                    }
1446
1447
1448
1449
                }
            }
        }

1450

1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
        if
        (
            returnReduce(nRefine, sumOp<label>())
          > returnReduce(nAllowRefine, sumOp<label>())
        )
        {
            Info<< "Reached refinement limit." << endl;
        }
    }

    return returnReduce(nRefine-oldNRefine, sumOp<label>());
}


Foam::label Foam::meshRefinement::markSmallFeatureRefinement
(
    const scalar planarCos,
    const label nAllowRefine,
    const labelList& neiLevel,
    const pointField& neiCc,

    labelList& refineCell,
    label& nRefine
) const
{
    const labelList& cellLevel = meshCutter_.cellLevel();
    const labelList& surfaceIndices = surfaces_.surfaces();
1478
    const List<FixedList<label, 3>>& extendedGapLevel =
1479
1480
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1492
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
1514
1515
1516
1517
1518
1519
1520
1521
        surfaces_.extendedGapLevel();
    const List<volumeType>& extendedGapMode = surfaces_.extendedGapMode();

    label oldNRefine = nRefine;

    // Check that we're using any gap refinement
    labelList shellMaxLevel(shells_.maxGapLevel());

    if (max(shellMaxLevel) == 0)
    {
        return 0;
    }

    //- Force calculation of tetBasePt
    (void)mesh_.tetBasePtIs();
    (void)mesh_.cellTree();


    forAll(surfaceIndices, surfI)
    {
        label geomI = surfaceIndices[surfI];
        const searchableSurface& geom = surfaces_.geometry()[geomI];


        // Get the element index in a roundabout way. Problem is e.g.
        // distributed surface where local indices differ from global
        // ones (needed for getRegion call)

        pointField ctrs;
        labelList region;
        vectorField normal;
        {
            // Representative local coordinates and bounding sphere
            scalarField radiusSqr;
            geom.boundingSpheres(ctrs, radiusSqr);

            List<pointIndexHit> info;
            geom.findNearest(ctrs, radiusSqr, info);

            forAll(info, i)
            {
                if (!info[i].hit())
                {
1522
                    FatalErrorInFunction
1523
1524
1525
1526
1527
1528
1529
1530
1531
1532
1533
1534
                        << "fc:" << ctrs[i]
                        << " radius:" << radiusSqr[i]
                        << exit(FatalError);
                }
            }

            geom.getRegion(info, region);
            geom.getNormal(info, normal);
        }

        // Do test to see whether triangles are inside/outside shell with
        // applicable specification (minLevel <= celllevel < maxLevel)
1535
        List<FixedList<label, 3>> shellGapInfo;
1536
1537
1538
1539
        List<volumeType> shellGapMode;
        shells_.findHigherGapLevel
        (
            ctrs,
1540
            labelList(ctrs.size(), Zero),
1541
1542
1543
1544
1545
            shellGapInfo,
            shellGapMode
        );


1546
1547
        DynamicList<label> map(ctrs.size());
        DynamicList<label> cellMap(ctrs.size());
1548

1549
1550
1551
1552
1553
        DynamicField<point> rayStart(ctrs.size());
        DynamicField<point> rayEnd(ctrs.size());
        DynamicField<scalar> gapSize(ctrs.size());

        label nTestCells = 0;
1554
1555
1556
1557
1558
1559
1560
1561
1562
1563
1564
1565
1566
1567
1568
1569
1570
1571
1572
1573
1574

        forAll(ctrs, i)
        {
            if (shellGapInfo[i][2] > 0)
            {
                label globalRegionI = surfaces_.globalRegion(surfI, region[i]);

                // Combine info from shell and surface
                FixedList<label, 3> gapInfo;
                volumeType gapMode;
                mergeGapInfo
                (
                    shellGapInfo[i],
                    shellGapMode[i],
                    extendedGapLevel[globalRegionI],
                    extendedGapMode[globalRegionI],
                    gapInfo,
                    gapMode
                );

                //- Option 1: use octree nearest searching inside polyMesh
1575
                //label cellI = mesh_.findCell(pt, polyMesh::CELL_TETS);
1576
1577
1578
1579
1580
1581
1582
1583
1584
1585
1586
1587
1588
1589
1590
1591

                //- Option 2: use octree 'inside' searching inside polyMesh. Is
                //            much faster.
                label cellI = -1;
                const indexedOctree<treeDataCell>& tree = mesh_.cellTree();
                if (tree.nodes().size() && tree.bb().contains(ctrs[i]))
                {
                    cellI = tree.findInside(ctrs[i]);
                }

                if (cellI != -1 && refineCell[cellI] == -1)
                {
                    // Construct one or two rays to test for oppositeness
                    // Note that we always want to use the surface normal
                    // and not the vector from cell centre to surface point

1592
                    label nRays = generateRays
1593
1594
1595
1596
1597
1598
1599
1600
                    (
                        ctrs[i],
                        normal[i],
                        gapInfo,
                        gapMode,

                        cellLevel[cellI],

1601
1602
                        rayStart,
                        rayEnd
1603
                    );
1604
1605

                    if (nRays > 0)
1606
                    {
1607
1608
1609
1610
1611
1612
                        nTestCells++;
                        for (label j = 0; j < nRays; j++)
                        {
                            cellMap.append(cellI);
                            map.append(i);
                        }
1613
1614
1615
1616
1617
                    }
                }
            }
        }

1618
        Info<< "Selected " << returnReduce(nTestCells, sumOp<label>())
1619
1620
            << " cells containing triangle centres out of "
            << mesh_.globalData().nTotalCells() << endl;
1621
1622
1623
1624
        map.shrink();
        cellMap.shrink();
        rayStart.shrink();
        rayEnd.shrink();
1625
1626
1627
1628
1629
1630
1631

        ctrs.clear();
        region.clear();
        shellGapInfo.clear();
        shellGapMode.clear();
        normal = UIndirectList<vector>(normal, map)();

1632
        // Do intersections.
1633
1634
1635
1636
        labelList surfaceHit;
        vectorField surfaceNormal;
        surfaces_.findNearestIntersection
        (
1637
1638
            rayStart,
            rayEnd,
1639
1640
1641
1642
1643
            surfaceHit,
            surfaceNormal
        );


1644
1645
        label nOldRefine = 0;

1646
1647
1648

        forAll(surfaceHit, i)
        {
1649
            if (surfaceHit[i] != -1) // && surf2[i] != -1)
1650
            {
1651
1652
                // Found intersection with surface. Check coplanar normals.
                label cellI = cellMap[i];
1653

1654
1655
1656
                if (mag(normal[i]&surfaceNormal[i]) > planarCos)
                {
                    if
1657
                    (
1658
1659
1660
1661
1662
1663
1664
                       !markForRefine
                        (
                            surfaceHit[i],
                            nAllowRefine,
                            refineCell[cellI],
                            nRefine
                        )
1665
                    )
1666
1667
1668
                    {
                        break;
                    }
1669
1670
1671
1672
1673
                }
            }
        }

        Info<< "For surface " << geom.name() << " found "
1674
            << returnReduce(nRefine-nOldRefine, sumOp<label>())
1675
1676
1677
1678
1679
1680
1681
1682
1683
1684
1685
1686
1687
1688
1689
1690
1691
            << " cells in small gaps" << endl;

        if
        (
            returnReduce(nRefine, sumOp<label>())
          > returnReduce(nAllowRefine, sumOp<label>())
        )
        {
            Info<< "Reached refinement limit." << endl;
        }
    }

    return returnReduce(nRefine-oldNRefine, sumOp<label>());
}


// ************************************************************************* //