diff --git a/tutorials/heatTransfer/buoyantBoussinesqSimpleFoam/iglooWithFridges/system/meshQualityDict b/tutorials/heatTransfer/buoyantBoussinesqSimpleFoam/iglooWithFridges/system/meshQualityDict
new file mode 100644
index 0000000000000000000000000000000000000000..1b5837a15e01bb8b946f96f851b5b38b9681e7ec
--- /dev/null
+++ b/tutorials/heatTransfer/buoyantBoussinesqSimpleFoam/iglooWithFridges/system/meshQualityDict
@@ -0,0 +1,64 @@
+/*--------------------------------*- C++ -*----------------------------------*\
+| =========                 |                                                 |
+| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
+|  \\    /   O peration     | Version:  dev                                   |
+|   \\  /    A nd           | Web:      www.OpenFOAM.org                      |
+|    \\/     M anipulation  |                                                 |
+\*---------------------------------------------------------------------------*/
+FoamFile
+{
+    version     2.0;
+    format      ascii;
+    class       dictionary;
+    object      meshQualityDict;
+}
+// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
+
+//- Maximum non-orthogonality allowed. Set to 180 to disable.
+maxNonOrtho 65;
+
+//- Max skewness allowed. Set to <0 to disable.
+maxBoundarySkewness 20;
+maxInternalSkewness 4;
+
+//- Max concaveness allowed. Is angle (in degrees) below which concavity
+//  is allowed. 0 is straight face, <0 would be convex face.
+//  Set to 180 to disable.
+maxConcave 80;
+
+//- Minimum pyramid volume. Is absolute volume of cell pyramid.
+//  Set to a sensible fraction of the smallest cell volume expected.
+//  Set to very negative number (e.g. -1E30) to disable.
+minVol 1e-13;
+
+//- Minimum quality of the tet formed by the face-centre
+//  and variable base point minimum decomposition triangles and
+//  the cell centre.  Set to very negative number (e.g. -1E30) to
+//  disable.
+//     <0 = inside out tet,
+//      0 = flat tet
+//      1 = regular tet
+minTetQuality 1e-30;
+
+//- Minimum face area. Set to <0 to disable.
+minArea -1;
+
+//- Minimum face twist. Set to <-1 to disable. dot product of face normal
+//- and face centre triangles normal
+minTwist 0.05;
+
+//- minimum normalised cell determinant
+//- 1 = hex, <= 0 = folded or flattened illegal cell
+minDeterminant 0.001;
+
+//- minFaceWeight (0 -> 0.5)
+minFaceWeight 0.05;
+
+//- minVolRatio (0 -> 1)
+minVolRatio 0.01;
+
+//must be >0 for Fluent compatibility
+minTriangleTwist -1;
+
+
+// ************************************************************************* //