From c5a5079582e57399767459e2f52621566baad477 Mon Sep 17 00:00:00 2001
From: mattijs <mattijs>
Date: Fri, 15 Jan 2010 17:21:42 +0000
Subject: [PATCH] Changed printing
---
.../autoHexMeshDriver/autoLayerDriver.C | 18 +++++++++++++-----
1 file changed, 13 insertions(+), 5 deletions(-)
diff --git a/src/mesh/autoMesh/autoHexMesh/autoHexMeshDriver/autoLayerDriver.C b/src/mesh/autoMesh/autoHexMesh/autoHexMeshDriver/autoLayerDriver.C
index cc49e48939e..acd16733925 100644
--- a/src/mesh/autoMesh/autoHexMesh/autoHexMeshDriver/autoLayerDriver.C
+++ b/src/mesh/autoMesh/autoHexMesh/autoHexMeshDriver/autoLayerDriver.C
@@ -2490,13 +2490,18 @@ void Foam::autoLayerDriver::mergePatchFacesUndo
<< "---------------------------" << nl
<< " - which are on the same patch" << nl
<< " - which make an angle < " << layerParams.featureAngle()
+ << "- which are on the same patch" << nl
+ << "- which make an angle < " << layerParams.featureAngle()
<< " degrees"
<< nl
<< " (cos:" << minCos << ')' << nl
<< " - as long as the resulting face doesn't become concave"
+ << " (cos:" << minCos << ')' << nl
+ << "- as long as the resulting face doesn't become concave"
<< " by more than "
<< layerParams.concaveAngle() << " degrees" << nl
<< " (0=straight, 180=fully concave)" << nl
+ << " (0=straight, 180=fully concave)" << nl
<< endl;
label nChanged = mergePatchFacesUndo(minCos, concaveCos, motionDict);
@@ -2546,11 +2551,6 @@ void Foam::autoLayerDriver::addLayers
);
- // Undistorted edge length
- const scalar edge0Len = meshRefiner_.meshCutter().level0EdgeLength();
- const labelList& cellLevel = meshRefiner_.meshCutter().cellLevel();
-
-
// Point-wise extrusion data
// ~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -2612,6 +2612,10 @@ void Foam::autoLayerDriver::addLayers
// Disable extrusion on warped faces
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ // Undistorted edge length
+ const scalar edge0Len = meshRefiner_.meshCutter().level0EdgeLength();
+ const labelList& cellLevel = meshRefiner_.meshCutter().cellLevel();
+
handleWarpedFaces
(
pp,
@@ -2651,6 +2655,10 @@ void Foam::autoLayerDriver::addLayers
}
+ // Undistorted edge length
+ const scalar edge0Len = meshRefiner_.meshCutter().level0EdgeLength();
+ const labelList& cellLevel = meshRefiner_.meshCutter().cellLevel();
+
// Determine (wanted) point-wise layer thickness and expansion ratio
scalarField thickness(pp().nPoints());
scalarField minThickness(pp().nPoints());
--
GitLab