openfoam issueshttps://develop.openfoam.com/Development/openfoam/-/issues2021-07-06T13:04:11Zhttps://develop.openfoam.com/Development/openfoam/-/issues/899Allrun-*2021-07-06T13:04:11ZPrashant SonakarAllrun-*We have following with Allrun-*
- ./incompressible/icoFoam/cavityMappingTest/Allrun-parallel
- ./incompressible/pimpleFoam/RAS/oscillatingInletACMI2D/Allrun-parallel
- ./multiphase/interIsoFoam/damBreak/Allrun-parallel
- ./lagrangian/coa...We have following with Allrun-*
- ./incompressible/icoFoam/cavityMappingTest/Allrun-parallel
- ./incompressible/pimpleFoam/RAS/oscillatingInletACMI2D/Allrun-parallel
- ./multiphase/interIsoFoam/damBreak/Allrun-parallel
- ./lagrangian/coalChemistryFoam/simplifiedSiwek/Allrun-parallel
- ./lagrangian/simpleReactingParcelFoam/verticalChannel/Allrun-parallel
- ./lagrangian/reactingParcelFoam/hotBoxes/Allrun-parallel
- ./mesh/foamyHexMesh/mixerVessel/Allrun-`pre`
- ./mesh/foamyHexMesh/mixerVessel/Allrun-`simulation`
- ./mesh/foamyHexMesh/blob/Allrun-parallel
- ./mesh/foamyHexMesh/flange/Allrun-parallel
- ./mesh/stitchMesh/simple-cube1/Allrun-`args`
- ./mesh/foamyQuadMesh/OpenCFD/Allrun-`rhoCentralFoam`
- ./heatTransfer/chtMultiRegionSimpleFoam/heatExchanger/Allrun-parallel
- ./heatTransfer/chtMultiRegionSimpleFoam/jouleHeatingSolid/Allrun-parallel
- ./heatTransfer/chtMultiRegionSimpleFoam/multiRegionHeaterRadiation/Allrun-parallel
- ./heatTransfer/chtMultiRegionFoam/windshieldCondensation/Allrun-parallel
- ./heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/Allrun-`serial`
- ./heatTransfer/chtMultiRegionFoam/snappyMultiRegionHeater/Allrun-parallel
- ./heatTransfer/chtMultiRegionFoam/windshieldDefrost/Allrun-parallel
- ./heatTransfer/chtMultiRegionFoam/externalSolarLoad/Allrun-parallel
- ./finiteArea/sphereSurfactantFoam/sphereTransport/Allrun-parallel
And many formats with Allrun.*
While the foamRunTutorials contain call to
- Allrun
- Alltest
- Allrun-parallel
- Allrun-optional (no such file nor doing anything at the moment!)
Can we formalize the names and give priority to Allrun-parallel than Allrun (serial version) ?
@andy @Mattijs @mark @Sergiohttps://develop.openfoam.com/Development/openfoam/-/issues/1179bug: changeDictionary remove patch2019-01-24T12:42:03ZPrashant Sonakarbug: changeDictionary remove patchThe following should remove entry from boundary file.
```
boundary
{
~blockMesh_inlet;
}
```
but fails at
```
--> FOAM FATAL IO ERROR:
'blockMesh_inlet' not found in dictionary ""
```
@mark @MattijsThe following should remove entry from boundary file.
```
boundary
{
~blockMesh_inlet;
}
```
but fails at
```
--> FOAM FATAL IO ERROR:
'blockMesh_inlet' not found in dictionary ""
```
@mark @Mattijshttps://develop.openfoam.com/Development/openfoam/-/issues/505BUG: lagrangian/icoUncoupledKinematicParcelFoam/hopper/hopperInitialState2017-10-30T11:28:59ZPrashant SonakarBUG: lagrangian/icoUncoupledKinematicParcelFoam/hopper/hopperInitialStateThe tutorial fails with
```
Cloud: kinematicCloud injector: model1
Added 3300 new parcels
4 move-collide subCycles
[3]
[3] --> FOAM FATAL IO ERROR:
[3] Expected a '(' while reading VectorSpace<Form, Cmpt, Ncmpts>, found on line...The tutorial fails with
```
Cloud: kinematicCloud injector: model1
Added 3300 new parcels
4 move-collide subCycles
[3]
[3] --> FOAM FATAL IO ERROR:
[3] Expected a '(' while reading VectorSpace<Form, Cmpt, Ncmpts>, found on line 0 an error
```
@SergioVersion v1706AdminAdminhttps://develop.openfoam.com/Development/openfoam/-/issues/499BUG? tutorials/heatTransfer/chtMultiRegionFoam/externalSolarLoad-parallel2017-06-19T19:43:57ZPrashant SonakarBUG? tutorials/heatTransfer/chtMultiRegionFoam/externalSolarLoad-parallelThe tutorial when tried in parallel failed attached script.
[Allrun](/uploads/135d01d12be71db5fd0b074c3ac48ddc/Allrun)
```
[1]
[1] --> FOAM FATAL IO ERROR:
[1] cannot find file
[1]
[1] file: /hosts/xxx/externalSolarLoad-parallel/proc...The tutorial when tried in parallel failed attached script.
[Allrun](/uploads/135d01d12be71db5fd0b074c3ac48ddc/Allrun)
```
[1]
[1] --> FOAM FATAL IO ERROR:
[1] cannot find file
[1]
[1] file: /hosts/xxx/externalSolarLoad-parallel/processor1/constant/air/mapDist at line 0.
```
@andyVersion v1706Sergio FerrarisSergio Ferrarishttps://develop.openfoam.com/Development/openfoam/-/issues/1142Colon in directory name: Ubuntu 16.042024-01-11T16:21:46ZPrashant SonakarColon in directory name: Ubuntu 16.04- thermophysicalModels/radiation/radiationModels/viewFactor/viewFactor.C
- thermophysicalModels/radiation/radiationModels/solarLoad/solarLoad.C
- applications/utilities/preProcessing/viewFactorsGen/viewFactorsGen.C
They have reference t...- thermophysicalModels/radiation/radiationModels/viewFactor/viewFactor.C
- thermophysicalModels/radiation/radiationModels/solarLoad/solarLoad.C
- applications/utilities/preProcessing/viewFactorsGen/viewFactorsGen.C
They have reference to mesh object "coarse`:`\<regionName\>"
However tutorial heatTransfer/chtMultiRegionSimpleFoam/multiRegionHeaterRadiation seem to write this 'coarse' mesh data.
This ends in error under Ubuntu environment where `:` is not allowed in name
Replacing these instances with `_` seem to work. Could you please review?
@mark @Mattijs @Sergio @andyhttps://develop.openfoam.com/Development/openfoam/-/issues/1187DOCU/ENH: lagrangian utilities2024-01-16T06:05:40ZPrashant SonakarDOCU/ENH: lagrangian utilities- [ ] particleTrack writes to processor0/VTK when run in parallel
- [x] $FOAM_APP/utilities/postProcessing/lagrangian/particleTracks/particleTrackProperties please correct cloudName->cloud
- [ ] ~~$FOAM_APP/utilities/postProcessing/lagra...- [ ] particleTrack writes to processor0/VTK when run in parallel
- [x] $FOAM_APP/utilities/postProcessing/lagrangian/particleTracks/particleTrackProperties please correct cloudName->cloud
- [ ] ~~$FOAM_APP/utilities/postProcessing/lagrangian/steadyParticleTracks/particleTrackDict please correct cloudName->cloud~~
- [ ] change alphaName->alpha in ParticleTrap.H
@andyv2206Kutalmış BerçinKutalmış Berçinhttps://develop.openfoam.com/Development/openfoam/-/issues/1120ENH: consistent settings in tutorials2018-12-13T05:52:12ZPrashant SonakarENH: consistent settings in tutorialsapplication in controlDict
- incompressible/overSimpleFoam/aeroFoil/aeroFoil_overset (use overSimpleFoam)
- mesh/stitchMesh/simple-cube1 (use stitchMesh)
- combustion/XiDyMFoam/annularCombustorTurbine (use XiDyMFoam)
- mesh/foamyQuadMesh...application in controlDict
- incompressible/overSimpleFoam/aeroFoil/aeroFoil_overset (use overSimpleFoam)
- mesh/stitchMesh/simple-cube1 (use stitchMesh)
- combustion/XiDyMFoam/annularCombustorTurbine (use XiDyMFoam)
- mesh/foamyQuadMesh/OpenCFD (controlDict.mesher -> foamyQuadMesh)
- mesh/foamyQuadMesh/OpenCFD (controlDict.mesher -> foamyQuadMesh)
- mesh/snappyHexMesh/flange (use snappyHexMeshDict)
- mesh/refineMesh/refineFieldDirs (use refineMesh)
- multiphase/overInterDyMFoam/floatingBody/floatingBody (use blockMesh/topoSet/subsetMesh)
@markv1812https://develop.openfoam.com/Development/openfoam/-/issues/1188ENH: foamFormat convert : lagrangian data2020-01-06T08:46:49ZPrashant SonakarENH: foamFormat convert : lagrangian dataAttached a simple case illustrating incorrect conversion of binary data.
[column.tgz](/uploads/e6cebf0e112f53b7da18ec2eb3531aad/column.tgz)
@andy @markAttached a simple case illustrating incorrect conversion of binary data.
[column.tgz](/uploads/e6cebf0e112f53b7da18ec2eb3531aad/column.tgz)
@andy @markhttps://develop.openfoam.com/Development/openfoam/-/issues/675Failures - collate fileHandler - 20.12.20172023-12-22T09:19:14ZPrashant SonakarFailures - collate fileHandler - 20.12.2017Attached
- list of errors and 3 lines of text with error from log file. [listOfErrors.txt](/uploads/726ab37571d663fdca66149ac1df6594/listOfErrors.txt)[errorDetails-3lines.txt](/uploads/210e519f6929164ff8721094ea952146/errorDetails-3line...Attached
- list of errors and 3 lines of text with error from log file. [listOfErrors.txt](/uploads/726ab37571d663fdca66149ac1df6594/listOfErrors.txt)[errorDetails-3lines.txt](/uploads/210e519f6929164ff8721094ea952146/errorDetails-3lines.txt)
- list of unconfirmed completions. [listOfUnconfirmedCompletion.txt](/uploads/4e87a9784b7354cd00da7cdc77cdfe83/listOfUnconfirmedCompletion.txt)
run with $FOAM_ETC/controlDict set to collated in
/hosts/punwor073/home/pss/OpenFOAM/compilations/ALPHA/centos6.6_compilation/OpenFOAM-plus.develop/tutorialsTest
@Mattijs @mark @andyhttps://develop.openfoam.com/Development/openfoam/-/issues/671Failures- unitTest: 19.12.20172018-06-12T04:01:30ZPrashant SonakarFailures- unitTest: 19.12.2017```64bit LABEL_SIZE compilation```
Files accessible at /home/alex2/prashant/OpenFOAM/OpenFOAM-plus.develop.alex/tutorialsTest
- Error
```
Application decomposePar - case combustion/XiDyMFoam/annularCombustorTurbine: ** FOAM FATAL ERRO...```64bit LABEL_SIZE compilation```
Files accessible at /home/alex2/prashant/OpenFOAM/OpenFOAM-plus.develop.alex/tutorialsTest
- Error
```
Application decomposePar - case combustion/XiDyMFoam/annularCombustorTurbine: ** FOAM FATAL ERROR **
Application potentialFoam - case combustion/XiDyMFoam/annularCombustorTurbine: ** FOAM FATAL ERROR **
Application XiDyMFoam - case combustion/XiDyMFoam/annularCombustorTurbine: ** FOAM FATAL ERROR **
Application chtMultiRegionSimpleFoam - case heatTransfer/chtMultiRegionSimpleFoam/externalCoupledHeater: ** FOAM FATAL ERROR **
Application chtMultiRegionSimpleFoam - case heatTransfer/chtMultiRegionSimpleFoam/jouleHeatingSolid: ** FOAM FATAL ERROR **
Application snappyHexMesh - case incompressible/simpleFoam/motorBike: ** FOAM FATAL ERROR ** (32bit label size OK!)
Application decomposePar - case incompressible/pimpleFoam/LES/channel395: ** FOAM FATAL ERROR **
Application pimpleFoam - case incompressible/pimpleFoam/LES/channel395: ** FOAM FATAL ERROR **
Application reconstructPar - case incompressible/pimpleFoam/LES/channel395: ** FOAM FATAL ERROR **
Application decomposePar - case incompressible/pimpleFoam/LES/channel395DFSEM: ** FOAM FATAL ERROR **
Application pimpleFoam - case incompressible/pimpleFoam/LES/channel395DFSEM: ** FOAM FATAL ERROR **
Application reactingParcelFoam - case lagrangian/reactingParcelFoam/verticalChannelLTS: ** FOAM FATAL ERROR **
Application interIsoFoam.postProcess - case multiphase/interIsoFoam/notchedDiscInSolidBodyRotation: ** FOAM FATAL ERROR **
```
- unconfirmed completion
```
Application rhoPimpleFoam - case compressible/rhoPimpleFoam/RAS/angledDuct
```
- Have a proper "End" or "Finalize" comment for logs
```
Application makeFaMesh - case finiteArea/liquidFilmFoam/cylinder
Application makeFaMesh - case finiteArea/sphereSurfactantFoam/sphereTransport
Application makeFaMesh - case finiteArea/surfactantFoam/planeTransport
- heatTransfer/chtMultiRegionFoam/multiRegionHeater/Allmesh called as runApplication
- mesh/stitchMesh/simple-cube1/Allmesh called as runApplication
```
@Sergio @mark @andy @Mattijshttps://develop.openfoam.com/Development/openfoam/-/issues/1431finite area non-orthogonal treament errors vs finite volume operators2020-03-19T15:51:29ZSergio Ferrarisfinite area non-orthogonal treament errors vs finite volume operatorsThe treatment of non-orthogonality in fam::laplcian operator differs from fvm:laplacian.
In this simple fixed BC temperature 2D slab, the same mesh is used for fam and fvm. While
in fvm the gradx(T)is smooth in fam presents non-uniformit...The treatment of non-orthogonality in fam::laplcian operator differs from fvm:laplacian.
In this simple fixed BC temperature 2D slab, the same mesh is used for fam and fvm. While
in fvm the gradx(T)is smooth in fam presents non-uniformity, specially close to the patches.
See aGradTx vs vGradTx.
laplacianFaFoam.tar is the fa solver
laplacianFoam is the fv solver.
The case cavity.tar contains the mesh and set up.
[aGradTx](/uploads/07f26b72d0b5cab79c334e8f4e9b7271/aGradTx.png)
[cavity.tar](/uploads/3a5a59a3b65fc071f00b99e64551df5b/cavity.tar)
[laplacianFaFoam.tar](/uploads/753a45d2a662a9bfd3a29b92a7afefbe/laplacianFaFoam.tar)
![vGradTx](/uploads/fabe63aa3fdef2f6c56fc1435a08873e/vGradTx.png)
The issue seems to be related to how the non-orthogonality is treated in the fam::laplacian,
special care should be taken for the non-orthogonality on the boundaries.v1912Sergio FerrarisSergio Ferrarishttps://develop.openfoam.com/Development/openfoam/-/issues/677Medium loop- failures - 21.12.20172018-06-12T04:01:04ZPrashant SonakarMedium loop- failures - 21.12.2017Cases in :
/home/alex2/prashant/OpenFOAM/OpenFOAM-plus.develop/tutorials/
- compressible/sonicFoam/RAS/nacaAirfoil - solver failed
- multiphase/reactingTwoPhaseEulerFoam/laminar/steamInjection - solver failed
- multiphase/compressibleInt...Cases in :
/home/alex2/prashant/OpenFOAM/OpenFOAM-plus.develop/tutorials/
- compressible/sonicFoam/RAS/nacaAirfoil - solver failed
- multiphase/reactingTwoPhaseEulerFoam/laminar/steamInjection - solver failed
- multiphase/compressibleInterDyMFoam/laminar/sphereDrop -solver failed
- multiphase/interFoam/laminar/vofToLagrangian/eulerianInjection -solver failed
@andy @Mattijs @Sergio @markhttps://develop.openfoam.com/Development/openfoam/-/issues/867Medium Test - 12.06.20182019-12-09T22:18:11ZPrashant SonakarMedium Test - 12.06.2018All cases could be accessed at: /home/alex4/prashant/SUPPORT/ESI/MEDIUM_TEST/tutorials_1806
- [x] DNS/dnsFoam/boxTurb16 - solver crash
- [x] IO/fileHandler/machineA/fileHandler - re-verify if we need `cp -r` while copying constant, line ...All cases could be accessed at: /home/alex4/prashant/SUPPORT/ESI/MEDIUM_TEST/tutorials_1806
- [x] DNS/dnsFoam/boxTurb16 - solver crash
- [x] IO/fileHandler/machineA/fileHandler - re-verify if we need `cp -r` while copying constant, line 36; 90 of Allrun
- [x] combustion/PDRFoam/flamePropagationWithObstacles - solver crash
- [x] mesh/foamyHexMesh/mixerVessel - solver crash
- [x] compressible/rhoSimpleFoam/gasMixing/injectorPipe - solver crash
- [x] compressible/sonicFoam/RAS/nacaAirfoil - solver crash
- [x] incompressible/pimpleFoam/LES/vortexShed - surface noise failed 'expected word error'
- [x] multiphase/compressibleInterFoam/laminar/climbingRod - solver failure
- [x] multiphase/driftFluxFoam/RAS/dahl - solver failure
- [x] multiphase/reactingTwoPhaseEulerFoam/RAS/LBend - solver failure
- [x] multiphase/compressibleInterFoam/laminar/depthCharge2D - solver failure
- [x] multiphase/interFoam/RAS/DTCHullMoving - solver failure
- [ ] ~~multiphase/interFoam/RAS/DTCHullWave - decomposePar failure 'missing entry value'~~ REMOVED
- [x] multiphase/interFoam/RAS/motorBike - rename solver in controlDict_nextWrite
- [x] multiphase/interFoam/laminar/vofToLagrangian/lagrangian* - both cases replace combustionModel type noCombustion to none
@andy @Mattijs @Sergio @markv1806https://develop.openfoam.com/Development/openfoam/-/issues/1082Medium Test Loop : v18122020-01-06T06:11:19ZPrashant SonakarMedium Test Loop : v1812As of 19 Nov
- [ ] combustion/reactingFoam/RAS/SandiaD_LTS - Solver failure
- [x] combustion/fireFoam/LES/compartmentFire - Please fix decomposition for panel and main domain
- [ ] mesh/foamyHexMesh/mixerVessel - Solver failure
- [ ] mu...As of 19 Nov
- [ ] combustion/reactingFoam/RAS/SandiaD_LTS - Solver failure
- [x] combustion/fireFoam/LES/compartmentFire - Please fix decomposition for panel and main domain
- [ ] mesh/foamyHexMesh/mixerVessel - Solver failure
- [ ] multiphase/overInterDyMFoam/boatAndPropeller - Solver failure
@Developmentv1812https://develop.openfoam.com/Development/openfoam/-/issues/913reference point - on processor boundary!2020-01-03T14:16:37ZPrashant Sonakarreference point - on processor boundary!multiphase/interIsoFoam/sloshingTank2D
1) Please correct the decomposerParDict to (1 2 2) since 2D case.
2) With this correction, when solver is initiated, it fails with error
```
[3] --> FOAM FATAL IO ERROR:
[3] Unable to set referen...multiphase/interIsoFoam/sloshingTank2D
1) Please correct the decomposerParDict to (1 2 2) since 2D case.
2) With this correction, when solver is initiated, it fails with error
```
[3] --> FOAM FATAL IO ERROR:
[3] Unable to set reference cell for field p
Reference point pRefPoint (0 0 0.15) found on 2 domains (should be one)
```
@andy @Mattijs @mark @Sergiov1812https://develop.openfoam.com/Development/openfoam/-/issues/861residual FO : DebugInfo2018-07-04T10:44:48ZPrashant Sonakarresidual FO : DebugInfoIn controlDict we have,
lduMatrix 1;
This causes to print "Setting residual field for first *" lines for each field and each time step, with writeFields true;
Please reconsider. @andy @Sergio @mark @MattijsIn controlDict we have,
lduMatrix 1;
This causes to print "Setting residual field for first *" lines for each field and each time step, with writeFields true;
Please reconsider. @andy @Sergio @mark @Mattijsv1806https://develop.openfoam.com/Development/openfoam/-/issues/399running oscillatingInletACMI2D under valgrind reports 'in use at exit: 2,172 ...2020-06-16T16:14:56ZMattijs Janssens4-Mattijs@users.noreply.develop.openfoam.comrunning oscillatingInletACMI2D under valgrind reports 'in use at exit: 2,172 bytes in 6 blocks'Not sure if this is a real problem. Re-run with all the memory tracing.Not sure if this is a real problem. Re-run with all the memory tracing.https://develop.openfoam.com/Development/openfoam/-/issues/1059Unit Test failures2019-07-03T20:14:47ZPrashant SonakarUnit Test failuresTutorials report : as of 31.10.2018
Branch: develop
```
/multiphase/interIsoFoam/damBreakWithObstacle:
log.interIsoFoam: [2] wrong token type - expected Scalar, found on line 0: word 'nan'
/multiphase/interFoam/RAS/motorBike:
...Tutorials report : as of 31.10.2018
Branch: develop
```
/multiphase/interIsoFoam/damBreakWithObstacle:
log.interIsoFoam: [2] wrong token type - expected Scalar, found on line 0: word 'nan'
/multiphase/interFoam/RAS/motorBike:
log.interFoam.restart: [0] cannot find file "/scratch/pss/351121/OpenFOAM/OpenFOAM-plus.develop/tutorialsTestprocessor0/0/p_rgh"
log.redistributePar.reconstruct: [4] No times selected
log.interFoam:
/multiphase/overInterDyMFoam/boatAndPropeller:
log.overInterDyMFoam:
/lagrangian/simpleReactingParcelFoam/verticalChannel:
log.simpleReactingParcelFoam: cannot find file "/scratch/pss/351121/OpenFOAM/OpenFOAM-plus.develop/tutorialsTestconstant/reacting1Properties"
/lagrangian/reactingParcelFoam/verticalChannelLTS:
log.reactingParcelFoam: Maximum number of iterations exceeded: 100
/mesh/parallel/filter:
log.reactingParcelFoam.parallel: [0] reactingParcelFoam: cannot open case directory "/scratch/pss/351121/OpenFOAM/OpenFOAM-plus.develop/tutorialsTestprocessor0"
log.redistributePar.1: [2] No times selected
log.redistributePar: [1] 'type' has 5 excess tokens in stream
/mesh/parallel/cavity:
log.redistributePar.5: [4] cannot find file "/scratch/pss/351121/OpenFOAM/OpenFOAM-plus.develop/tutorialsTestprocessor4/constant/polyMesh/sets/f0"
log.icoFoam.5: [3] cannot find file "/scratch/pss/351121/OpenFOAM/OpenFOAM-plus.develop/tutorialsTestprocessor3/0.01/p"
/mesh/snappyHexMesh/iglooWithFridgesDirectionalRefinement:
log.snappyHexMesh: [1] 'origin' not found in dictionary "/scratch/pss/351121/OpenFOAM/OpenFOAM-plus.develop/tutorialsTestsystem/snappyHexMeshDict.geometry.twoFridgeFreezers.seal.transform"
/heatTransfer/buoyantBoussinesqSimpleFoam/iglooWithFridges:
log.snappyHexMesh: cannot dereference nullptr at index 56 in range [0,3)
```
@Developmenthttps://develop.openfoam.com/Development/openfoam/-/issues/856Unit tests: 06-06-20182018-07-02T05:02:01ZPrashant SonakarUnit tests: 06-06-2018- multiphase/interDyMFoam/RAS/motorBike should move to interFoam
- multiphase/interFoam/RAS/DTCHullWave :
- inlet BC expects entry 'value' - field alpha.water
- call for setWaves application, which doesn't exist
- lagrangian/rea...- multiphase/interDyMFoam/RAS/motorBike should move to interFoam
- multiphase/interFoam/RAS/DTCHullWave :
- inlet BC expects entry 'value' - field alpha.water
- call for setWaves application, which doesn't exist
- lagrangian/reactingParcelFoam/verticalChannelLTS : solver exit with maxIter 100
unconfirmed completions
- compressible/rhoSimpleFoam/gasMixing/injectorPipe: solver
cases run at /home/alex2/prashant/OpenFOAM/OpenFOAM-plus.feature-xxx/tutorialsTest
@andy @Mattijs @mark @Sergiov1806https://develop.openfoam.com/Development/openfoam/-/issues/1969windows testcase 2012: failing2024-01-09T12:15:33ZPawan Ghildiyalwindows testcase 2012: failing@mark : cases failing for windows
> **Case :** interFoam/laminar/capillaryRise
![image](/uploads/4145c1ca4a334b2f09174c9c4a0e28bb/image.png)
Adding in EXE_LIBS following lib resolve issue -ltwoPhaseProperties
> Case2: heatTransfe...@mark : cases failing for windows
> **Case :** interFoam/laminar/capillaryRise
![image](/uploads/4145c1ca4a334b2f09174c9c4a0e28bb/image.png)
Adding in EXE_LIBS following lib resolve issue -ltwoPhaseProperties
> Case2: heatTransfer/chtMultiRegionSimpleFoam/jouleHeatingSolid
failing to read variable jouleSource*:V. (looks issue with having colon in name of files
![image](/uploads/676102d50484e0516d752125c6ac277c/image.png)