Development issueshttps://develop.openfoam.com/groups/Development/-/issues2016-10-04T09:50:10Zhttps://develop.openfoam.com/Development/openfoam/-/issues/249Field construct from indirect list2016-10-04T09:50:10ZMark OLESENField construct from indirect listCurrently need two parameters to construct a field from indirect addressing. A constructor from UIndirectList for ease of use. Already filed upstream, but no activity there.
@MattijsCurrently need two parameters to construct a field from indirect addressing. A constructor from UIndirectList for ease of use. Already filed upstream, but no activity there.
@MattijsMark OLESENMark OLESENhttps://develop.openfoam.com/Development/openfoam/-/issues/675Failures - collate fileHandler - 20.12.20172023-12-22T09:19:14ZPrashant SonakarFailures - collate fileHandler - 20.12.2017Attached
- list of errors and 3 lines of text with error from log file. [listOfErrors.txt](/uploads/726ab37571d663fdca66149ac1df6594/listOfErrors.txt)[errorDetails-3lines.txt](/uploads/210e519f6929164ff8721094ea952146/errorDetails-3line...Attached
- list of errors and 3 lines of text with error from log file. [listOfErrors.txt](/uploads/726ab37571d663fdca66149ac1df6594/listOfErrors.txt)[errorDetails-3lines.txt](/uploads/210e519f6929164ff8721094ea952146/errorDetails-3lines.txt)
- list of unconfirmed completions. [listOfUnconfirmedCompletion.txt](/uploads/4e87a9784b7354cd00da7cdc77cdfe83/listOfUnconfirmedCompletion.txt)
run with $FOAM_ETC/controlDict set to collated in
/hosts/punwor073/home/pss/OpenFOAM/compilations/ALPHA/centos6.6_compilation/OpenFOAM-plus.develop/tutorialsTest
@Mattijs @mark @andyhttps://develop.openfoam.com/Development/openfoam/-/issues/637ensight surface format missing space2017-11-21T07:09:14ZMark OLESENensight surface format missing spacewhen variables are too long - EP#547
@Prashantwhen variables are too long - EP#547
@Prashantv1712Mark OLESENMark OLESENhttps://develop.openfoam.com/Development/openfoam/-/issues/520consolidate table bounding2017-07-08T09:14:05ZMark OLESENconsolidate table boundingduplicate or nearly duplicate older code for handling table bounds. Can use Enum instead.duplicate or nearly duplicate older code for handling table bounds. Can use Enum instead.v1712Mark OLESENMark OLESENhttps://develop.openfoam.com/Development/openfoam/-/issues/524provide build information about intel-mpi + gcc combination2017-07-13T06:34:55ZMark OLESENprovide build information about intel-mpi + gcc combination@Pawan@Pawanv1712Mark OLESENMark OLESENhttps://develop.openfoam.com/Development/openfoam/-/issues/113BUG/ENH: incomplete installtion check with foamInstallationTest2017-03-16T08:30:19ZPrashant SonakarBUG/ENH: incomplete installtion check with foamInstallationTestThe utility performs check for basic installation and confirms success.
However if some of the dependencies are not resolved (e.g. CGAL, boost,...) few utilities will not be installed (e.g. surfaceFeatureExtract, snappyHexMesh,...) bu...The utility performs check for basic installation and confirms success.
However if some of the dependencies are not resolved (e.g. CGAL, boost,...) few utilities will not be installed (e.g. surfaceFeatureExtract, snappyHexMesh,...) but rest would be OK
I think foamInstallationTest should check overall picture and report
- missing dependencies (including any third-party)
- failed libraries/applications
etc...
@Mattijs
AdminAdminhttps://develop.openfoam.com/Development/openfoam/-/issues/402BUG: noise with -case and/or -dict option2019-12-09T21:29:27ZPrashant SonakarBUG: noise with -case and/or -dict optionThe input files read from the noiseDict must be absolute path or using environment variables like $FOAM_CASE
The relative path doesn't work.[Test_innerPath.tgz](/uploads/24d7858f28fe9f6cf4b7201d2438c654/Test_innerPath.tgz)
Ref: EP#338The input files read from the noiseDict must be absolute path or using environment variables like $FOAM_CASE
The relative path doesn't work.[Test_innerPath.tgz](/uploads/24d7858f28fe9f6cf4b7201d2438c654/Test_innerPath.tgz)
Ref: EP#338AdminAdminhttps://develop.openfoam.com/Development/openfoam/-/issues/658Feature: Possibility for Regular Expressions in snappyHexMeshDict, surfaceFea...2020-01-03T14:31:23ZKutalmış BerçinFeature: Possibility for Regular Expressions in snappyHexMeshDict, surfaceFeatureExtractDict etc. for File NamesA user is able to use POSIX regular expressions for OpenFOAM's **keywords** as well as **file names** for *some* entries: such as `refinementSurfaces` and `refinementRegions` entries in a `snappyHexMeshDict` as exemplified herein: https:...A user is able to use POSIX regular expressions for OpenFOAM's **keywords** as well as **file names** for *some* entries: such as `refinementSurfaces` and `refinementRegions` entries in a `snappyHexMeshDict` as exemplified herein: https://bugs.openfoam.org/view.php?id=527
Yet one currently cannot use this flexibility for **file names** in `surfaceFeatureExtractDict` and `geometry` entry of a `snappyHexMeshDict`. Might be useful to expand the above for the latter, I believe.
Kind regardsKutalmış BerçinKutalmış Berçinhttps://develop.openfoam.com/Development/openfoam/-/issues/867Medium Test - 12.06.20182019-12-09T22:18:11ZPrashant SonakarMedium Test - 12.06.2018All cases could be accessed at: /home/alex4/prashant/SUPPORT/ESI/MEDIUM_TEST/tutorials_1806
- [x] DNS/dnsFoam/boxTurb16 - solver crash
- [x] IO/fileHandler/machineA/fileHandler - re-verify if we need `cp -r` while copying constant, line ...All cases could be accessed at: /home/alex4/prashant/SUPPORT/ESI/MEDIUM_TEST/tutorials_1806
- [x] DNS/dnsFoam/boxTurb16 - solver crash
- [x] IO/fileHandler/machineA/fileHandler - re-verify if we need `cp -r` while copying constant, line 36; 90 of Allrun
- [x] combustion/PDRFoam/flamePropagationWithObstacles - solver crash
- [x] mesh/foamyHexMesh/mixerVessel - solver crash
- [x] compressible/rhoSimpleFoam/gasMixing/injectorPipe - solver crash
- [x] compressible/sonicFoam/RAS/nacaAirfoil - solver crash
- [x] incompressible/pimpleFoam/LES/vortexShed - surface noise failed 'expected word error'
- [x] multiphase/compressibleInterFoam/laminar/climbingRod - solver failure
- [x] multiphase/driftFluxFoam/RAS/dahl - solver failure
- [x] multiphase/reactingTwoPhaseEulerFoam/RAS/LBend - solver failure
- [x] multiphase/compressibleInterFoam/laminar/depthCharge2D - solver failure
- [x] multiphase/interFoam/RAS/DTCHullMoving - solver failure
- [ ] ~~multiphase/interFoam/RAS/DTCHullWave - decomposePar failure 'missing entry value'~~ REMOVED
- [x] multiphase/interFoam/RAS/motorBike - rename solver in controlDict_nextWrite
- [x] multiphase/interFoam/laminar/vofToLagrangian/lagrangian* - both cases replace combustionModel type noCombustion to none
@andy @Mattijs @Sergio @markv1806https://develop.openfoam.com/Development/openfoam/-/issues/837PackedBoolList/bitSet has no ::set(const labelUList&)2018-06-07T05:57:54ZMattijs Janssens4-Mattijs@users.noreply.develop.openfoam.comPackedBoolList/bitSet has no ::set(const labelUList&)This has been renamed to 'setMany'. Is there a problem with ::set? Is there a clear distinction with single element setting?This has been renamed to 'setMany'. Is there a problem with ::set? Is there a clear distinction with single element setting?Mark OLESENMark OLESENhttps://develop.openfoam.com/Development/openfoam/-/issues/709blended factor is written every time step2018-01-29T09:06:06Zvilfayeaublended factor is written every time stepHi,
When using
```
DebugSwitches
{
blendedSchemeBase 1;
}
```
The blended factor is printed every timestep instead of writeControl/Interval.
Best,
SebastienHi,
When using
```
DebugSwitches
{
blendedSchemeBase 1;
}
```
The blended factor is printed every timestep instead of writeControl/Interval.
Best,
Sebastienhttps://develop.openfoam.com/Development/openfoam/-/issues/843libFieldFunctionObjects writeInterval2018-06-01T13:04:49ZAdminlibFieldFunctionObjects writeIntervalIn the v1712 release the following libFieldFunctionObjects
dummy
{
type wallShearStress;
libs ("libfieldFunctionObjects.so")
writeControl timeStep;
writeInterval 1e+06;
writeFiel...In the v1712 release the following libFieldFunctionObjects
dummy
{
type wallShearStress;
libs ("libfieldFunctionObjects.so")
writeControl timeStep;
writeInterval 1e+06;
writeFields no;
patches ("board.*");
log no;
}
writes the wallShearStress field in the case directory every time step. The same controlDict sintax worked fine for the same case with the 2.4.0 version, with the field object written every specified write interval (using outputInterval in the old version).https://develop.openfoam.com/Development/openfoam/-/issues/783surfaceFieldValue does not check for failure to open data file2023-12-07T19:03:27ZPrashant SonakarsurfaceFieldValue does not check for failure to open data fileWith >1024 surfaceFieldValue function objects you might run out of filedescriptors for the data file!
There is currently no error message if it cannot open a data file.With >1024 surfaceFieldValue function objects you might run out of filedescriptors for the data file!
There is currently no error message if it cannot open a data file.Prashant SonakarPrashant Sonakarhttps://develop.openfoam.com/Development/openfoam/-/issues/655UOPstream does not zero padding (placeholder)2021-07-06T11:31:22ZMattijs Janssens4-Mattijs@users.noreply.develop.openfoam.comUOPstream does not zero padding (placeholder)UOPstream enforces alignment of individual blocks. It does not fill the added padding with zero. This shows up when running e.g. valgrind.
- Not a bug since we also don't read the padded data.
- Avoid by using setSize(xxx, 0) instead of...UOPstream enforces alignment of individual blocks. It does not fill the added padding with zero. This shows up when running e.g. valgrind.
- Not a bug since we also don't read the padded data.
- Avoid by using setSize(xxx, 0) instead of setSize(xxx)Mark OLESENMark OLESENhttps://develop.openfoam.com/Development/openfoam/-/issues/25BUG/ENH: faceSouce FO output controlled by outputControl than evaluateControl2015-12-16T16:44:01ZPrashant SonakarBUG/ENH: faceSouce FO output controlled by outputControl than evaluateControlCase:
/home/alex2/prashant/QA/UNIT_TESTS/FO-tests/compressible/motorBike
with settings
faceSource1 (outputControl timeStep; log true;)
faceSource2 (evaluateControl timeStep; outputControl outputTime; log true;)
solver l...Case:
/home/alex2/prashant/QA/UNIT_TESTS/FO-tests/compressible/motorBike
with settings
faceSource1 (outputControl timeStep; log true;)
faceSource2 (evaluateControl timeStep; outputControl outputTime; log true;)
solver log shows output from faceSource1 only.
And postProcessing output contains data from faceSource1 only. (writeInterval = 3)
@Mattijs
Functionality migration from internal development lineSergio FerrarisSergio Ferrarishttps://develop.openfoam.com/Development/openfoam/-/issues/381mergePatchFaces in multiphase/interDyMFoam/RAS/motorBike2018-05-29T05:39:49ZMattijs Janssens4-Mattijs@users.noreply.develop.openfoam.commergePatchFaces in multiphase/interDyMFoam/RAS/motorBikeMerging patch faces is switched on in the tutorial. It makes more sense to switch it on.Merging patch faces is switched on in the tutorial. It makes more sense to switch it on.https://develop.openfoam.com/Development/openfoam/-/issues/1238add support for mingw cross-compilation2020-08-05T17:56:26ZMark OLESENadd support for mingw cross-compilationMark OLESENMark OLESENhttps://develop.openfoam.com/Development/openfoam/-/issues/616surfaceFeatureExtract crashes on zero-length edges2020-03-16T20:32:24ZMattijs Janssens4-Mattijs@users.noreply.develop.openfoam.comsurfaceFeatureExtract crashes on zero-length edges[bjoern.obj](/uploads/61e9e5663b25d0a97bccd9cd41092430/bjoern.obj)[bjoern.obj](/uploads/61e9e5663b25d0a97bccd9cd41092430/bjoern.obj)Mattijs Janssens4-Mattijs@users.noreply.develop.openfoam.comMattijs Janssens4-Mattijs@users.noreply.develop.openfoam.comhttps://develop.openfoam.com/Development/openfoam/-/issues/575ENH: print correct information of "out of bounding box" for sampledTriSurface...2019-04-26T11:55:28ZPrashant SonakarENH: print correct information of "out of bounding box" for sampledTriSurface field samplingAttached example illustrating behavior
- sampling trisurface is out of mesh
- it gives badly formed BB error when used with fieldValue (and nothing with sampledSurfaces!)
[test_GL575.tgz](/uploads/d59947762579e3c6ed783acf923bf4ff/test_...Attached example illustrating behavior
- sampling trisurface is out of mesh
- it gives badly formed BB error when used with fieldValue (and nothing with sampledSurfaces!)
[test_GL575.tgz](/uploads/d59947762579e3c6ed783acf923bf4ff/test_GL575.tgz)
Refer: EP#472
@mark @Mattijsv1712AdminAdminhttps://develop.openfoam.com/Development/openfoam/-/issues/857interDyMFoam/RAS/motorBike tutorial fails2020-01-03T13:58:32ZMattijs Janssens4-Mattijs@users.noreply.develop.openfoam.cominterDyMFoam/RAS/motorBike tutorial fails(branch develop-pre-release)
[log.interFoam](/uploads/3b57a8add908b399ebf6add29ab0125d/log.interFoam)(branch develop-pre-release)
[log.interFoam](/uploads/3b57a8add908b399ebf6add29ab0125d/log.interFoam)