Development issueshttps://develop.openfoam.com/groups/Development/-/issues2015-12-17T13:06:21Zhttps://develop.openfoam.com/Development/openfoam/-/issues/19BUG: DES Turbulence model/schemes2015-12-17T13:06:21ZPrashant SonakarBUG: DES Turbulence model/schemesPrashant,
I have 2 issues. I have attached the sample pitzDaily example.
1. It seems you need explicitly declare libturbulenceModelSchemes.so in controlDict as well as keep the .so
file folder.
2. IDDES works only with IDDESDel...Prashant,
I have 2 issues. I have attached the sample pitzDaily example.
1. It seems you need explicitly declare libturbulenceModelSchemes.so in controlDict as well as keep the .so
file folder.
2. IDDES works only with IDDESDelta. However, DDES works with IDDESDelta, vanDriest and cubeRootVol. In
earlier OF versions IDDES used to work with these 3.
--
Best Regards,
Koushik Sengupta.
[pitzDaily.tgz](/uploads/bad2078887b4de9e2108b71269153176/pitzDaily.tgz)
@Mattijs @Koushik
Functionality migration from internal development lineAdminAdminhttps://develop.openfoam.com/Development/openfoam/-/issues/24BUG: forces FO with execFlowFunctionObject (including porosity)2015-12-17T12:53:52ZPrashant SonakarBUG: forces FO with execFlowFunctionObject (including porosity)When porosity is requested:
--> FOAM Warning :
From function virtual void Foam::forces::calcForcesMoment()
in file forces/forces.C at line 1174
Porosity effects requested, but no porosity models found in the database
...When porosity is requested:
--> FOAM Warning :
From function virtual void Foam::forces::calcForcesMoment()
in file forces/forces.C at line 1174
Porosity effects requested, but no porosity models found in the database
/home/alex2/prashant/QA/MD2014/AUTOMATED_TEST_LOOP/MD2014-09Dec/16_localForce_execFlowFunctionObjects/motorBike
@Mattijs Functionality migration from internal development lineSergio FerrarisSergio Ferrarishttps://develop.openfoam.com/Development/openfoam/-/issues/14Documentation/Bug: ID 27: SHM- avoid mesh distorsion in far field2023-08-19T21:13:19ZPrashant SonakarDocumentation/Bug: ID 27: SHM- avoid mesh distorsion in far fieldIs pointSmoother ($FOAM_SRC/dynamicMesh/pointSmoothers) integrated yet?
The example for this feature is mentioned as incompressible/simpleFoam/motorBike??
@andy Is pointSmoother ($FOAM_SRC/dynamicMesh/pointSmoothers) integrated yet?
The example for this feature is mentioned as incompressible/simpleFoam/motorBike??
@andy Functionality migration from internal development lineMattijs Janssens4-Mattijs@users.noreply.develop.openfoam.comMattijs Janssens4-Mattijs@users.noreply.develop.openfoam.comhttps://develop.openfoam.com/Development/openfoam/-/issues/7[BUG]: incompatible files (motorBike case)2023-08-19T21:13:19ZPrashant Sonakar[BUG]: incompatible files (motorBike case)Tried dev-OpenCFD.develop files into dev.master, but even after few manual changes, case fails.
/home/alex2/prashant/QA/MD2014/motorBike-dev.master_files-From-dev-OpenCFD
@andy @Mattijs Tried dev-OpenCFD.develop files into dev.master, but even after few manual changes, case fails.
/home/alex2/prashant/QA/MD2014/motorBike-dev.master_files-From-dev-OpenCFD
@andy @Mattijs Functionality migration from internal development lineAdminAdminhttps://develop.openfoam.com/Development/openfoam/-/issues/16BUG: windTunnel 2D case failure2023-08-19T21:13:19ZPrashant SonakarBUG: windTunnel 2D case failureAttached case fails in parallel operation. (serial does work)
[windTunnel2D.tgz](/uploads/5c076bc1c9582e1d4a134fd52578f989/windTunnel2D.tgz)
@andy @Mattijs Attached case fails in parallel operation. (serial does work)
[windTunnel2D.tgz](/uploads/5c076bc1c9582e1d4a134fd52578f989/windTunnel2D.tgz)
@andy @Mattijs Functionality migration from internal development lineAdminAdminhttps://develop.openfoam.com/Development/openfoam/-/issues/26BUG: Function Objects2016-01-08T12:41:02ZPrashant SonakarBUG: Function ObjectsFailed: cloudInfo
case: /home/alex2/prashant/QA/UNIT_TESTS/FO-tests/lagrangian/verticalChannel
--------------
output log missing:
abort, cellSource, faceSource, partialWrite, patchProbes, probes, readFields, removeRegisteredObj...Failed: cloudInfo
case: /home/alex2/prashant/QA/UNIT_TESTS/FO-tests/lagrangian/verticalChannel
--------------
output log missing:
abort, cellSource, faceSource, partialWrite, patchProbes, probes, readFields, removeRegisteredObject, setTimeStep, sets, surfaces, timeActivatedFileUpdate, turbulenceFields, wallBoundedStreamLines, writeDictionary
case: /home/alex2/prashant/QA/UNIT_TESTS/FO-tests/compressible/motorBike
Is the output to log controlled by outputControl keyword?
--------------
Not working as expected: abort
@Mattijs
Functionality migration from internal development lineMattijs Janssens4-Mattijs@users.noreply.develop.openfoam.comMattijs Janssens4-Mattijs@users.noreply.develop.openfoam.comhttps://develop.openfoam.com/Development/openfoam/-/issues/8BUG: graphics (runTimePostProcessing) compilation issue2023-08-19T21:13:19ZPrashant SonakarBUG: graphics (runTimePostProcessing) compilation issueDevelop branch fails to compile runTimePostprocessing.
/home/alex2/prashant/OpenFOAM/OpenFOAM-dev-OpenCFD.develop/log.allwmake_25Nov_IST0955
(line 5763)
@andy @Mattijs Develop branch fails to compile runTimePostprocessing.
/home/alex2/prashant/OpenFOAM/OpenFOAM-dev-OpenCFD.develop/log.allwmake_25Nov_IST0955
(line 5763)
@andy @Mattijs Functionality migration from internal development lineAdminAdminhttps://develop.openfoam.com/Development/openfoam/-/issues/11BUG: flux summary reporting different values for serial/Parallel2023-08-19T21:13:19ZPrashant SonakarBUG: flux summary reporting different values for serial/ParallelAttached test case showing differences.
[09_porosityReport_duct_parallel.tgz](/uploads/f4c56bc124ba5d47dd0a6d8ddf91724d/09_porosityReport_duct_parallel.tgz)
@Mattijs Attached test case showing differences.
[09_porosityReport_duct_parallel.tgz](/uploads/f4c56bc124ba5d47dd0a6d8ddf91724d/09_porosityReport_duct_parallel.tgz)
@Mattijs Functionality migration from internal development lineAdminAdminhttps://develop.openfoam.com/Development/openfoam/-/issues/2uniformInletOutletFvPatchField uniform value is not being updated2023-08-19T21:13:18ZAdminuniformInletOutletFvPatchField uniform value is not being updatedThe condition uses a DataEntry<Type> to define the uniform value, and this is not being updated in the call to updateCoeffs()The condition uses a DataEntry<Type> to define the uniform value, and this is not being updated in the call to updateCoeffs()Functionality migration from internal development lineAdminAdminhttps://develop.openfoam.com/Development/openfoam/-/issues/12Documentation/BUG: Volume point smoothing2023-08-19T21:13:19ZPrashant SonakarDocumentation/BUG: Volume point smoothingIs it possible to have nSmoothInternal > nSmoothPatch?
Documentation says it can't. But present version can allow this.
Please fix either of these! :)
@andy Is it possible to have nSmoothInternal > nSmoothPatch?
Documentation says it can't. But present version can allow this.
Please fix either of these! :)
@andy Functionality migration from internal development lineMattijs Janssens4-Mattijs@users.noreply.develop.openfoam.comMattijs Janssens4-Mattijs@users.noreply.develop.openfoam.comhttps://develop.openfoam.com/Development/openfoam/-/issues/15BUG: Failure of case for humidity BC2023-08-19T21:13:19ZPrashant SonakarBUG: Failure of case for humidity BCCase $FOAM_TUTORIALS/heatTransfer/chtMultiRegionFoam/windshieldCondensation fails.
@andy @Mattijs Case $FOAM_TUTORIALS/heatTransfer/chtMultiRegionFoam/windshieldCondensation fails.
@andy @Mattijs Functionality migration from internal development lineAdminAdminhttps://develop.openfoam.com/Development/openfoam/-/issues/23Discussion: FO output : blendingFactor2015-12-15T07:07:16ZPrashant SonakarDiscussion: FO output : blendingFactorIs it OK to have two output statements per iteration?
blendingFactor blendingFactor1 output:
scheme 1 cells : 106634
scheme 2 cells : 0
blended cells : 0
blendingFactor blendingFactor1 output:
writing fi...Is it OK to have two output statements per iteration?
blendingFactor blendingFactor1 output:
scheme 1 cells : 106634
scheme 2 cells : 0
blended cells : 0
blendingFactor blendingFactor1 output:
writing field blendingFactor1:U
/home/alex2/prashant/QA/UNIT_TESTS/FO-tests/compressible/motorBike/log.rhoPimpleFoam.blendingFactor
@Mattijs Functionality migration from internal development lineMattijs Janssens4-Mattijs@users.noreply.develop.openfoam.comMattijs Janssens4-Mattijs@users.noreply.develop.openfoam.comhttps://develop.openfoam.com/Development/openfoam/-/issues/10BUG: volume mesh smoothing doesn't work in parallel2023-08-19T21:13:19ZPrashant SonakarBUG: volume mesh smoothing doesn't work in parallelAttached test case shows different non-orthogonality in checkMesh[shm_refine_2_to_1.tgz](https://develop.openfoam.com/Development/OpenFOAM-dev-OpenCFD/uploads/1b7f3c7ef83976f98f239f1837c4ff5f/shm_refine_2_to_1.tgz)
@andy Attached test case shows different non-orthogonality in checkMesh[shm_refine_2_to_1.tgz](https://develop.openfoam.com/Development/OpenFOAM-dev-OpenCFD/uploads/1b7f3c7ef83976f98f239f1837c4ff5f/shm_refine_2_to_1.tgz)
@andy Functionality migration from internal development lineMattijs Janssens4-Mattijs@users.noreply.develop.openfoam.comMattijs Janssens4-Mattijs@users.noreply.develop.openfoam.comhttps://develop.openfoam.com/Development/openfoam/-/issues/25BUG/ENH: faceSouce FO output controlled by outputControl than evaluateControl2015-12-16T16:44:01ZPrashant SonakarBUG/ENH: faceSouce FO output controlled by outputControl than evaluateControlCase:
/home/alex2/prashant/QA/UNIT_TESTS/FO-tests/compressible/motorBike
with settings
faceSource1 (outputControl timeStep; log true;)
faceSource2 (evaluateControl timeStep; outputControl outputTime; log true;)
solver l...Case:
/home/alex2/prashant/QA/UNIT_TESTS/FO-tests/compressible/motorBike
with settings
faceSource1 (outputControl timeStep; log true;)
faceSource2 (evaluateControl timeStep; outputControl outputTime; log true;)
solver log shows output from faceSource1 only.
And postProcessing output contains data from faceSource1 only. (writeInterval = 3)
@Mattijs
Functionality migration from internal development lineSergio FerrarisSergio Ferrarishttps://develop.openfoam.com/Development/openfoam/-/issues/6Missing documentation: porosity in force/coefficient FO2023-08-19T21:13:19ZPrashant SonakarMissing documentation: porosity in force/coefficient FO@andy @Mattijs
Add details about porosity in Header files in $src/postProcessing/functionObjects/forces@andy @Mattijs
Add details about porosity in Header files in $src/postProcessing/functionObjects/forcesFunctionality migration from internal development lineAdminAdminhttps://develop.openfoam.com/Development/openfoam/-/issues/22Discussion: patchProbes compatibility with fixedLocations2016-11-07T14:27:03ZPrashant SonakarDiscussion: patchProbes compatibility with fixedLocationsStandard probes FO has additional entry
// Optional: do not recalculate cells if mesh moves
fixedLocations false;
Is this also applicable for patchProbes?
@andy Standard probes FO has additional entry
// Optional: do not recalculate cells if mesh moves
fixedLocations false;
Is this also applicable for patchProbes?
@andy Functionality migration from internal development lineMattijs Janssens4-Mattijs@users.noreply.develop.openfoam.comMattijs Janssens4-Mattijs@users.noreply.develop.openfoam.comhttps://develop.openfoam.com/Development/openfoam/-/issues/9BUG: surface collate option dumps empty time folders2023-08-19T21:13:19ZPrashant SonakarBUG: surface collate option dumps empty time folderscase dumps additional time directories in postProcessing folder. (these are empty folders)
[09star_write_transient.tgz](https://develop.openfoam.com/Development/OpenFOAM-dev-OpenCFD/uploads/c8a33d1b292382fb33f0e8edfb089772/09star_writ...case dumps additional time directories in postProcessing folder. (these are empty folders)
[09star_write_transient.tgz](https://develop.openfoam.com/Development/OpenFOAM-dev-OpenCFD/uploads/c8a33d1b292382fb33f0e8edfb089772/09star_write_transient.tgz)
@Mattijs Functionality migration from internal development lineAdminAdminhttps://develop.openfoam.com/Development/openfoam/-/issues/31BUG: Specifiying both locationInMesh and locationsInMesh2015-12-17T13:04:11ZPrashant SonakarBUG: Specifiying both locationInMesh and locationsInMeshTool should "Error exit" with message to user for invalid usage.
[snappyMultiRegionHeater.tgz](/uploads/26f1cd602dfc68a25d13772296aeae91/snappyMultiRegionHeater.tgz)
Tool should "Error exit" with message to user for invalid usage.
[snappyMultiRegionHeater.tgz](/uploads/26f1cd602dfc68a25d13772296aeae91/snappyMultiRegionHeater.tgz)
Functionality migration from internal development lineMattijs Janssens4-Mattijs@users.noreply.develop.openfoam.comMattijs Janssens4-Mattijs@users.noreply.develop.openfoam.comhttps://develop.openfoam.com/Development/openfoam/-/issues/29BUG: Laminar model not available for buoyantSimpleFoam2015-12-17T12:53:10ZPrashant SonakarBUG: Laminar model not available for buoyantSimpleFoamValidation case NaturalConvection/2D-Laminar/2DLaminarBuoyantCavity fails.
1) constant/thermophysicalProperties.mixture.equationOfState now needs T0 instead of Tref
2) keyword simulationType is not respected. It looks for RAS only....Validation case NaturalConvection/2D-Laminar/2DLaminarBuoyantCavity fails.
1) constant/thermophysicalProperties.mixture.equationOfState now needs T0 instead of Tref
2) keyword simulationType is not respected. It looks for RAS only.
@Mattijs @Sergio Functionality migration from internal development lineAdminAdminhttps://develop.openfoam.com/Development/openfoam/-/issues/34BUG: Unit test findings - 14 Dec 20152015-12-17T12:52:19ZPrashant SonakarBUG: Unit test findings - 14 Dec 2015@Mattijs
All tests under: /home/alex2/prashant/OpenFOAM/OpenFOAM-dev-OpenCFD.develop/tutorialsTest.14Dec
- keyword transmissivityModel is undefined in constant/baffle3DRegion/radiationProperties
Case: heatTransfer/buoyantSimple...@Mattijs
All tests under: /home/alex2/prashant/OpenFOAM/OpenFOAM-dev-OpenCFD.develop/tutorialsTest.14Dec
- keyword transmissivityModel is undefined in constant/baffle3DRegion/radiationProperties
Case: heatTransfer/buoyantSimpleFoam/circuitBoardCoolingFunctionality migration from internal development lineSergio FerrarisSergio Ferraris