Merge branch 'selector' into 'develop'

openfoam-selector

See merge request !3

openfoam-selector/LICENSE

+Copyright (c) 2007 Cisco Systems, Inc.  All rights reserved.
+
+$COPYRIGHT$
+
+Additional copyrights may follow
+
+$HEADER$
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are
+met:
+
+- Redistributions of source code must retain the above copyright
+  notice, this list of conditions and the following disclaimer.
+
+- Redistributions in binary form must reproduce the above copyright
+  notice, this list of conditions and the following disclaimer listed
+  in this license in the documentation and/or other materials
+  provided with the distribution.
+
+- Neither the name of the copyright holders nor the names of its
+  contributors may be used to endorse or promote products derived from
+  this software without specific prior written permission.
+
+The copyright holders provide no reassurances that the source code
+provided does not infringe any patent, copyright, or any other
+intellectual property rights of third parties.  The copyright holders
+disclaim any liability to any recipient for claims brought against
+recipient by any third party for infringement of that parties
+intellectual property rights.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

openfoam-selector/Makefile.am

+# Copyright (c) 2007 Cisco Systems, Inc.  All rights reserved.
+
+EXTRA_DIST = README LICENSE
+
+nodist_bin_SCRIPTS = openfoam-selector
+dist_bin_SCRIPTS = openfoam-selector-menu
+
+shell_startupdir = @OPENFOAM_SELECTOR_SHELL_STARTUP_DIR@
+shell_startup_SCRIPTS = openfoam-selector.sh openfoam-selector.csh
+
+man_MANS = openfoam-selector.1 openfoam-selector-menu.1
+
+CLEANFILES = $(bin_scripts) $(man_MANS)
+
+openfoam-selector.1: openfoam-selector
+	pod2man --section=1 --center="User Commands" --release="$(VERSION)" --date="$(MAN_DATE)" --name=openfoam-selector openfoam-selector > openfoam-selector.1
+
+openfoam-selector-menu.1: openfoam-selector-menu
+	pod2man --section=1 --center="User Commands" --release="$(VERSION)" --date="$(MAN_DATE)" --name=openfoam-selector-menu openfoam-selector-menu > openfoam-selector-menu.1

openfoam-selector/README

+Copyright (c) 2007-2008 Cisco Systems, Inc.  All rights reserved.
+
+Overview
+========
+
+mpi-selector is a simplistic tool that helps manage having multiple
+MPI implementations installed on a single host (or cluster).  It
+allows system administrators to set a site-wide default MPI
+implementation, but also allows users to selectively override that
+site-wide default with their own choice of MPI implementation.
+
+Both selections are optional and independent; system administrators
+may choose not to set a site-wide default while users do choose to
+their own default (and vice versa).
+
+Much more information is contained in the mpi-selector.1 man page.
+
+Installation
+============
+
+mpi-selector is installed with the traditional "configure" / "make"
+combination common to many open source projects.
+
+A traditional "configure" script is provided to allow you where to
+install mpi-selector.  The main option that you'll want to use is
+--prefix, specifying the top directory where mpi-selector and its
+files are installed.
+
+  shell$ ./configure --prefix=/where/to/install
+
+Then run "make install" to install (you may need root permissions if
+installing into restricted directories):
+
+  shell# make install
+
+This command will install the following files:
+
+  $bindir/mpi-selector
+    --> $bindir defaults to "$prefix/bin", unless overridden on
+        the "configure" command line
+  $mandir/man1/mpi-selector.1
+    --> $mandir defaults to "$prefix/man", unless overridden on
+        the "configure" command line
+  $pkgdatadir/mpi-selector.sh
+  $pkgdatadir/mpi-selector.csh
+    --> $pkgdatadir defaults to "$prefix/share/mpi-selector", unless
+        overridden on the "configure" command line (RPMs will
+        typically change this value -- YMMV).
+
+The two files installed in $pkgdatadir are intended for site-wide
+shell startup usage.  For example, on RedHat systems, they should be
+copied to /etc/profile.d so that all shells will execute them upon
+startup.
+
+These last two files will examine both the site-wide and per user MPI
+implementation selection, and if one is set, setup the shell's
+environment for it.
+
+Contact
+=======
+
+If you need assistance with the mpi-selector package, first read the
+mpi-selector(1) man page; it contains a lot more information than is
+listed here.
+
+If that still does not answer your question, please send mail to the
+OpenFabrics general mailing list (see http://www.openfabrics.org/).
+This is a high-volume mailing list, so be sure to put "mpi-selector"
+in the subject line somewhere to help ensure that it won't be missed.
+
+Or feel free to contact me directly.
+
+Enjoy!
+
+- Jeff Squyres
+  14 Feb 2007

openfoam-selector/VERSION

+1.0.3

openfoam-selector/configure.ac

+# -*- shell-script -*-
+# Copyright (c) 2007 Cisco Systems, Inc.  All rights reserved.
+
+# Startup
+AC_INIT([openfoam-selector],
+        [m4_normalize(esyscmd([cat VERSION]))],
+        [], [openfoam-selector])
+AM_INIT_AUTOMAKE([foreign dist-bzip2])
+
+# Setup some directory names and filenames that are common across all
+# the scripts
+prefix_save=$prefix
+if test "NONE" = "$prefix"; then
+    prefix=/usr/local
+fi
+
+AC_MSG_CHECKING([shell startup file directory])
+AC_ARG_WITH([shell-startup-dir],
+    AC_HELP_STRING([--with-shell-startup-dir=<dir>],
+                   [Directory where shell startup files are installed (default: $pkgdatadir)]))
+if test "$with_shell_startup_dir" == ""; then
+    OPENFOAM_SELECTOR_SHELL_STARTUP_DIR='$(pkgdatadir)'
+else
+    OPENFOAM_SELECTOR_SHELL_STARTUP_DIR=$with_shell_startup_dir
+fi
+AC_SUBST(OPENFOAM_SELECTOR_SHELL_STARTUP_DIR)
+AC_MSG_RESULT([$OPENFOAM_SELECTOR_SHELL_STARTUP_DIR])
+
+AC_MSG_CHECKING([repository directory])
+localstatedir_save="$localstatedir"
+eval localstatedir="$localstatedir"
+eval OPENFOAM_SELECTOR_DATADIR="$localstatedir/openfoam-selector/data"
+AC_SUBST(OPENFOAM_SELECTOR_DATADIR)
+localstatedir="$localstatedir_save"
+AC_MSG_RESULT([$OPENFOAM_SELECTOR_DATADIR])
+
+AC_MSG_CHECKING([system configuration directory])
+sysconfdir_save="$sysconfdir"
+eval sysconfdir="$sysconfdir"
+eval OPENFOAM_SELECTOR_SYSCONFDIR="$sysconfdir/sysconfig"
+AC_SUBST(OPENFOAM_SELECTOR_SYSCONFDIR)
+sysconfdir="$sysconfdir_save"
+AC_MSG_RESULT([$OPENFOAM_SELECTOR_SYSCONFDIR])
+
+OPENFOAM_SELECTOR_SYSCONFIG_FILE="openfoam-selector"
+OPENFOAM_SELECTOR_HOME_FILE=".openfoam-selector"
+AC_SUBST(OPENFOAM_SELECTOR_SYSCONFIG_FILE)
+AC_SUBST(OPENFOAM_SELECTOR_HOME_FILE)
+
+prefix=$prefix_save
+
+# Information for the man page
+MAN_DATE=`date "+%B %d, %Y"`
+AC_SUBST(MAN_DATE)
+
+# Party on
+AC_CONFIG_FILES([
+    Makefile
+
+    openfoam-selector
+    openfoam-selector.sh
+    openfoam-selector.csh
+])
+AC_CONFIG_COMMANDS([tasty], [
+for file in openfoam-selector openfoam-selector.sh;
+do
+  if test -f "$file"; then
+     chmod -w $file
+     chmod +x $file
+  fi
+done])
+AC_OUTPUT

openfoam-selector/install-sh

+#!/bin/sh
+# install - install a program, script, or datafile
+
+scriptversion=2005-05-14.22
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.  It can only install one file at a time, a restriction
+# shared with many OS's install programs.
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+chmodcmd="$chmodprog 0755"
+chowncmd=
+chgrpcmd=
+stripcmd=
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=
+dst=
+dir_arg=
+dstarg=
+no_target_directory=
+
+usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+   or: $0 [OPTION]... SRCFILES... DIRECTORY
+   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+   or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+-c         (ignored)
+-d         create directories instead of installing files.
+-g GROUP   $chgrpprog installed files to GROUP.
+-m MODE    $chmodprog installed files to MODE.
+-o USER    $chownprog installed files to USER.
+-s         $stripprog installed files.
+-t DIRECTORY  install into DIRECTORY.
+-T         report an error if DSTFILE is a directory.
+--help     display this help and exit.
+--version  display version info and exit.
+
+Environment variables override the default commands:
+  CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
+"
+
+while test -n "$1"; do
+  case $1 in
+    -c) shift
+        continue;;
+
+    -d) dir_arg=true
+        shift
+        continue;;
+
+    -g) chgrpcmd="$chgrpprog $2"
+        shift
+        shift
+        continue;;
+
+    --help) echo "$usage"; exit $?;;
+
+    -m) chmodcmd="$chmodprog $2"
+        shift
+        shift
+        continue;;
+
+    -o) chowncmd="$chownprog $2"
+        shift
+        shift
+        continue;;
+
+    -s) stripcmd=$stripprog
+        shift
+        continue;;
+
+    -t) dstarg=$2
+	shift
+	shift
+	continue;;
+
+    -T) no_target_directory=true
+	shift
+	continue;;
+
+    --version) echo "$0 $scriptversion"; exit $?;;
+
+    *)  # When -d is used, all remaining arguments are directories to create.
+	# When -t is used, the destination is already specified.
+	test -n "$dir_arg$dstarg" && break
+        # Otherwise, the last argument is the destination.  Remove it from $@.
+	for arg
+	do
+          if test -n "$dstarg"; then
+	    # $@ is not empty: it contains at least $arg.
+	    set fnord "$@" "$dstarg"
+	    shift # fnord
+	  fi
+	  shift # arg
+	  dstarg=$arg
+	done
+	break;;
+  esac
+done
+
+if test -z "$1"; then
+  if test -z "$dir_arg"; then
+    echo "$0: no input file specified." >&2
+    exit 1
+  fi
+  # It's OK to call `install-sh -d' without argument.
+  # This can happen when creating conditional directories.
+  exit 0
+fi
+
+for src
+do
+  # Protect names starting with `-'.
+  case $src in
+    -*) src=./$src ;;
+  esac
+
+  if test -n "$dir_arg"; then
+    dst=$src
+    src=
+
+    if test -d "$dst"; then
+      mkdircmd=:
+      chmodcmd=
+    else
+      mkdircmd=$mkdirprog
+    fi
+  else
+    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+    # might cause directories to be created, which would be especially bad
+    # if $src (and thus $dsttmp) contains '*'.
+    if test ! -f "$src" && test ! -d "$src"; then
+      echo "$0: $src does not exist." >&2
+      exit 1
+    fi
+
+    if test -z "$dstarg"; then
+      echo "$0: no destination specified." >&2
+      exit 1
+    fi
+
+    dst=$dstarg
+    # Protect names starting with `-'.
+    case $dst in
+      -*) dst=./$dst ;;
+    esac
+
+    # If destination is a directory, append the input filename; won't work
+    # if double slashes aren't ignored.
+    if test -d "$dst"; then
+      if test -n "$no_target_directory"; then
+	echo "$0: $dstarg: Is a directory" >&2
+	exit 1
+      fi
+      dst=$dst/`basename "$src"`
+    fi
+  fi
+
+  # This sed command emulates the dirname command.
+  dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'`
+
+  # Make sure that the destination directory exists.
+
+  # Skip lots of stat calls in the usual case.
+  if test ! -d "$dstdir"; then
+    defaultIFS='
+	 '
+    IFS="${IFS-$defaultIFS}"
+
+    oIFS=$IFS
+    # Some sh's can't handle IFS=/ for some reason.
+    IFS='%'
+    set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
+    shift
+    IFS=$oIFS
+
+    pathcomp=
+
+    while test $# -ne 0 ; do
+      pathcomp=$pathcomp$1
+      shift
+      if test ! -d "$pathcomp"; then
+        $mkdirprog "$pathcomp"
+	# mkdir can fail with a `File exist' error in case several
+	# install-sh are creating the directory concurrently.  This
+	# is OK.
+	test -d "$pathcomp" || exit
+      fi
+      pathcomp=$pathcomp/
+    done
+  fi
+
+  if test -n "$dir_arg"; then
+    $doit $mkdircmd "$dst" \
+      && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
+      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
+      && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
+      && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
+
+  else
+    dstfile=`basename "$dst"`
+
+    # Make a couple of temp file names in the proper directory.
+    dsttmp=$dstdir/_inst.$$_
+    rmtmp=$dstdir/_rm.$$_
+
+    # Trap to clean up those temp files at exit.
+    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+    trap '(exit $?); exit' 1 2 13 15
+
+    # Copy the file name to the temp name.
+    $doit $cpprog "$src" "$dsttmp" &&
+
+    # and set any options; do chmod last to preserve setuid bits.
+    #
+    # If any of these fail, we abort the whole thing.  If we want to
+    # ignore errors from any of these, just make sure not to ignore
+    # errors from the above "$doit $cpprog $src $dsttmp" command.
+    #
+    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
+      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
+      && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
+      && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
+
+    # Now rename the file to the real destination.
+    { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
+      || {
+	   # The rename failed, perhaps because mv can't rename something else
+	   # to itself, or perhaps because mv is so ancient that it does not
+	   # support -f.
+
+	   # Now remove or move aside any old file at destination location.
+	   # We try this two ways since rm can't unlink itself on some
+	   # systems and the destination file might be busy for other
+	   # reasons.  In this case, the final cleanup might fail but the new
+	   # file should still install successfully.
+	   {
+	     if test -f "$dstdir/$dstfile"; then
+	       $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
+	       || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
+	       || {
+		 echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
+		 (exit 1); exit 1
+	       }
+	     else
+	       :
+	     fi
+	   } &&
+
+	   # Now rename the file to the real destination.
+	   $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
+	 }
+    }
+  fi || { (exit 1); exit 1; }
+done
+
+# The final little trick to "correctly" pass the exit status to the exit trap.
+{
+  (exit 0); exit 0
+}
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:

openfoam-selector/missing

+#! /bin/sh
+# Common wrapper for a few potentially missing GNU programs.
+
+scriptversion=2016-01-11.22; # UTC
+
+# Copyright (C) 1996-2017 Free Software Foundation, Inc.
+# Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+  echo 1>&2 "Try '$0 --help' for more information"
+  exit 1
+fi
+
+case $1 in
+
+  --is-lightweight)
+    # Used by our autoconf macros to check whether the available missing
+    # script is modern enough.
+    exit 0
+    ;;
+
+  --run)
+    # Back-compat with the calling convention used by older automake.
+    shift
+    ;;
+
+  -h|--h|--he|--hel|--help)
+    echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due
+to PROGRAM being missing or too old.
+
+Options:
+  -h, --help      display this help and exit
+  -v, --version   output version information and exit
+
+Supported PROGRAM values:
+  aclocal   autoconf  autoheader   autom4te  automake  makeinfo
+  bison     yacc      flex         lex       help2man
+
+Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
+'g' are ignored when checking the name.
+
+Send bug reports to <bug-automake@gnu.org>."
+    exit $?
+    ;;
+
+  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+    echo "missing $scriptversion (GNU Automake)"
+    exit $?
+    ;;
+
+  -*)
+    echo 1>&2 "$0: unknown '$1' option"
+    echo 1>&2 "Try '$0 --help' for more information"
+    exit 1
+    ;;
+
+esac
+
+# Run the given program, remember its exit status.
+"$@"; st=$?
+
+# If it succeeded, we are done.
+test $st -eq 0 && exit 0
+
+# Also exit now if we it failed (or wasn't found), and '--version' was
+# passed; such an option is passed most likely to detect whether the
+# program is present and works.
+case $2 in --version|--help) exit $st;; esac
+
+# Exit code 63 means version mismatch.  This often happens when the user
+# tries to use an ancient version of a tool on a file that requires a
+# minimum version.
+if test $st -eq 63; then
+  msg="probably too old"
+elif test $st -eq 127; then
+  # Program was missing.
+  msg="missing on your system"
+else
+  # Program was found and executed, but failed.  Give up.
+  exit $st
+fi
+
+perl_URL=http://www.perl.org/
+flex_URL=http://flex.sourceforge.net/
+gnu_software_URL=http://www.gnu.org/software
+
+program_details ()
+{
+  case $1 in
+    aclocal|automake)
+      echo "The '$1' program is part of the GNU Automake package:"
+      echo "<$gnu_software_URL/automake>"
+      echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:"
+      echo "<$gnu_software_URL/autoconf>"
+      echo "<$gnu_software_URL/m4/>"
+      echo "<$perl_URL>"
+      ;;
+    autoconf|autom4te|autoheader)
+      echo "The '$1' program is part of the GNU Autoconf package:"
+      echo "<$gnu_software_URL/autoconf/>"
+      echo "It also requires GNU m4 and Perl in order to run:"
+      echo "<$gnu_software_URL/m4/>"
+      echo "<$perl_URL>"
+      ;;
+  esac
+}
+
+give_advice ()
+{
+  # Normalize program name to check for.
+  normalized_program=`echo "$1" | sed '
+    s/^gnu-//; t
+    s/^gnu//; t
+    s/^g//; t'`
+
+  printf '%s\n' "'$1' is $msg."
+
+  configure_deps="'configure.ac' or m4 files included by 'configure.ac'"
+  case $normalized_program in
+    autoconf*)
+      echo "You should only need it if you modified 'configure.ac',"
+      echo "or m4 files included by it."
+      program_details 'autoconf'
+      ;;
+    autoheader*)
+      echo "You should only need it if you modified 'acconfig.h' or"
+      echo "$configure_deps."
+      program_details 'autoheader'
+      ;;
+    automake*)
+      echo "You should only need it if you modified 'Makefile.am' or"
+      echo "$configure_deps."
+      program_details 'automake'
+      ;;
+    aclocal*)
+      echo "You should only need it if you modified 'acinclude.m4' or"
+      echo "$configure_deps."
+      program_details 'aclocal'