Commit ac32802e authored by Mark Olesen's avatar Mark Olesen

Merge branch 'selector' into 'develop'

openfoam-selector

See merge request !3
parents 2a46af53 28217694
Copyright (c) 2007 Cisco Systems, Inc. All rights reserved.
$COPYRIGHT$
Additional copyrights may follow
$HEADER$
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are
met:
- Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
- Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer listed
in this license in the documentation and/or other materials
provided with the distribution.
- Neither the name of the copyright holders nor the names of its
contributors may be used to endorse or promote products derived from
this software without specific prior written permission.
The copyright holders provide no reassurances that the source code
provided does not infringe any patent, copyright, or any other
intellectual property rights of third parties. The copyright holders
disclaim any liability to any recipient for claims brought against
recipient by any third party for infringement of that parties
intellectual property rights.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
# Copyright (c) 2007 Cisco Systems, Inc. All rights reserved.
EXTRA_DIST = README LICENSE
nodist_bin_SCRIPTS = openfoam-selector
dist_bin_SCRIPTS = openfoam-selector-menu
shell_startupdir = @OPENFOAM_SELECTOR_SHELL_STARTUP_DIR@
shell_startup_SCRIPTS = openfoam-selector.sh openfoam-selector.csh
man_MANS = openfoam-selector.1 openfoam-selector-menu.1
CLEANFILES = $(bin_scripts) $(man_MANS)
openfoam-selector.1: openfoam-selector
pod2man --section=1 --center="User Commands" --release="$(VERSION)" --date="$(MAN_DATE)" --name=openfoam-selector openfoam-selector > openfoam-selector.1
openfoam-selector-menu.1: openfoam-selector-menu
pod2man --section=1 --center="User Commands" --release="$(VERSION)" --date="$(MAN_DATE)" --name=openfoam-selector-menu openfoam-selector-menu > openfoam-selector-menu.1
This diff is collapsed.
Copyright (c) 2007-2008 Cisco Systems, Inc. All rights reserved.
Overview
========
mpi-selector is a simplistic tool that helps manage having multiple
MPI implementations installed on a single host (or cluster). It
allows system administrators to set a site-wide default MPI
implementation, but also allows users to selectively override that
site-wide default with their own choice of MPI implementation.
Both selections are optional and independent; system administrators
may choose not to set a site-wide default while users do choose to
their own default (and vice versa).
Much more information is contained in the mpi-selector.1 man page.
Installation
============
mpi-selector is installed with the traditional "configure" / "make"
combination common to many open source projects.
A traditional "configure" script is provided to allow you where to
install mpi-selector. The main option that you'll want to use is
--prefix, specifying the top directory where mpi-selector and its
files are installed.
shell$ ./configure --prefix=/where/to/install
Then run "make install" to install (you may need root permissions if
installing into restricted directories):
shell# make install
This command will install the following files:
$bindir/mpi-selector
--> $bindir defaults to "$prefix/bin", unless overridden on
the "configure" command line
$mandir/man1/mpi-selector.1
--> $mandir defaults to "$prefix/man", unless overridden on
the "configure" command line
$pkgdatadir/mpi-selector.sh
$pkgdatadir/mpi-selector.csh
--> $pkgdatadir defaults to "$prefix/share/mpi-selector", unless
overridden on the "configure" command line (RPMs will
typically change this value -- YMMV).
The two files installed in $pkgdatadir are intended for site-wide
shell startup usage. For example, on RedHat systems, they should be
copied to /etc/profile.d so that all shells will execute them upon
startup.
These last two files will examine both the site-wide and per user MPI
implementation selection, and if one is set, setup the shell's
environment for it.
Contact
=======
If you need assistance with the mpi-selector package, first read the
mpi-selector(1) man page; it contains a lot more information than is
listed here.
If that still does not answer your question, please send mail to the
OpenFabrics general mailing list (see http://www.openfabrics.org/).
This is a high-volume mailing list, so be sure to put "mpi-selector"
in the subject line somewhere to help ensure that it won't be missed.
Or feel free to contact me directly.
Enjoy!
- Jeff Squyres
14 Feb 2007
This diff is collapsed.
This diff is collapsed.
# -*- shell-script -*-
# Copyright (c) 2007 Cisco Systems, Inc. All rights reserved.
# Startup
AC_INIT([openfoam-selector],
[m4_normalize(esyscmd([cat VERSION]))],
[], [openfoam-selector])
AM_INIT_AUTOMAKE([foreign dist-bzip2])
# Setup some directory names and filenames that are common across all
# the scripts
prefix_save=$prefix
if test "NONE" = "$prefix"; then
prefix=/usr/local
fi
AC_MSG_CHECKING([shell startup file directory])
AC_ARG_WITH([shell-startup-dir],
AC_HELP_STRING([--with-shell-startup-dir=<dir>],
[Directory where shell startup files are installed (default: $pkgdatadir)]))
if test "$with_shell_startup_dir" == ""; then
OPENFOAM_SELECTOR_SHELL_STARTUP_DIR='$(pkgdatadir)'
else
OPENFOAM_SELECTOR_SHELL_STARTUP_DIR=$with_shell_startup_dir
fi
AC_SUBST(OPENFOAM_SELECTOR_SHELL_STARTUP_DIR)
AC_MSG_RESULT([$OPENFOAM_SELECTOR_SHELL_STARTUP_DIR])
AC_MSG_CHECKING([repository directory])
localstatedir_save="$localstatedir"
eval localstatedir="$localstatedir"
eval OPENFOAM_SELECTOR_DATADIR="$localstatedir/openfoam-selector/data"
AC_SUBST(OPENFOAM_SELECTOR_DATADIR)
localstatedir="$localstatedir_save"
AC_MSG_RESULT([$OPENFOAM_SELECTOR_DATADIR])
AC_MSG_CHECKING([system configuration directory])
sysconfdir_save="$sysconfdir"
eval sysconfdir="$sysconfdir"
eval OPENFOAM_SELECTOR_SYSCONFDIR="$sysconfdir/sysconfig"
AC_SUBST(OPENFOAM_SELECTOR_SYSCONFDIR)
sysconfdir="$sysconfdir_save"
AC_MSG_RESULT([$OPENFOAM_SELECTOR_SYSCONFDIR])
OPENFOAM_SELECTOR_SYSCONFIG_FILE="openfoam-selector"
OPENFOAM_SELECTOR_HOME_FILE=".openfoam-selector"
AC_SUBST(OPENFOAM_SELECTOR_SYSCONFIG_FILE)
AC_SUBST(OPENFOAM_SELECTOR_HOME_FILE)
prefix=$prefix_save
# Information for the man page
MAN_DATE=`date "+%B %d, %Y"`
AC_SUBST(MAN_DATE)
# Party on
AC_CONFIG_FILES([
Makefile
openfoam-selector
openfoam-selector.sh
openfoam-selector.csh
])
AC_CONFIG_COMMANDS([tasty], [
for file in openfoam-selector openfoam-selector.sh;
do
if test -f "$file"; then
chmod -w $file
chmod +x $file
fi
done])
AC_OUTPUT
#!/bin/sh
# install - install a program, script, or datafile
scriptversion=2005-05-14.22
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
# following copyright and license.
#
# Copyright (C) 1994 X Consortium
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to
# deal in the Software without restriction, including without limitation the
# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
# sell copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#
# Except as contained in this notice, the name of the X Consortium shall not
# be used in advertising or otherwise to promote the sale, use or other deal-
# ings in this Software without prior written authorization from the X Consor-
# tium.
#
#
# FSF changes to this file are in the public domain.
#
# Calling this script install-sh is preferred over install.sh, to prevent
# `make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
# from scratch. It can only install one file at a time, a restriction
# shared with many OS's install programs.
# set DOITPROG to echo to test this script
# Don't use :- since 4.3BSD and earlier shells don't like it.
doit="${DOITPROG-}"
# put in absolute paths if you don't have them in your path; or use env. vars.
mvprog="${MVPROG-mv}"
cpprog="${CPPROG-cp}"
chmodprog="${CHMODPROG-chmod}"
chownprog="${CHOWNPROG-chown}"
chgrpprog="${CHGRPPROG-chgrp}"
stripprog="${STRIPPROG-strip}"
rmprog="${RMPROG-rm}"
mkdirprog="${MKDIRPROG-mkdir}"
chmodcmd="$chmodprog 0755"
chowncmd=
chgrpcmd=
stripcmd=
rmcmd="$rmprog -f"
mvcmd="$mvprog"
src=
dst=
dir_arg=
dstarg=
no_target_directory=
usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
or: $0 [OPTION]... SRCFILES... DIRECTORY
or: $0 [OPTION]... -t DIRECTORY SRCFILES...
or: $0 [OPTION]... -d DIRECTORIES...
In the 1st form, copy SRCFILE to DSTFILE.
In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
In the 4th, create DIRECTORIES.
Options:
-c (ignored)
-d create directories instead of installing files.
-g GROUP $chgrpprog installed files to GROUP.
-m MODE $chmodprog installed files to MODE.
-o USER $chownprog installed files to USER.
-s $stripprog installed files.
-t DIRECTORY install into DIRECTORY.
-T report an error if DSTFILE is a directory.
--help display this help and exit.
--version display version info and exit.
Environment variables override the default commands:
CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
"
while test -n "$1"; do
case $1 in
-c) shift
continue;;
-d) dir_arg=true
shift
continue;;
-g) chgrpcmd="$chgrpprog $2"
shift
shift
continue;;
--help) echo "$usage"; exit $?;;
-m) chmodcmd="$chmodprog $2"
shift
shift
continue;;
-o) chowncmd="$chownprog $2"
shift
shift
continue;;
-s) stripcmd=$stripprog
shift
continue;;
-t) dstarg=$2
shift
shift
continue;;
-T) no_target_directory=true
shift
continue;;
--version) echo "$0 $scriptversion"; exit $?;;
*) # When -d is used, all remaining arguments are directories to create.
# When -t is used, the destination is already specified.
test -n "$dir_arg$dstarg" && break
# Otherwise, the last argument is the destination. Remove it from $@.
for arg
do
if test -n "$dstarg"; then
# $@ is not empty: it contains at least $arg.
set fnord "$@" "$dstarg"
shift # fnord
fi
shift # arg
dstarg=$arg
done
break;;
esac
done
if test -z "$1"; then
if test -z "$dir_arg"; then
echo "$0: no input file specified." >&2
exit 1
fi
# It's OK to call `install-sh -d' without argument.
# This can happen when creating conditional directories.
exit 0
fi
for src
do
# Protect names starting with `-'.
case $src in
-*) src=./$src ;;
esac
if test -n "$dir_arg"; then
dst=$src
src=
if test -d "$dst"; then
mkdircmd=:
chmodcmd=
else
mkdircmd=$mkdirprog
fi
else
# Waiting for this to be detected by the "$cpprog $src $dsttmp" command
# might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'.
if test ! -f "$src" && test ! -d "$src"; then
echo "$0: $src does not exist." >&2
exit 1
fi
if test -z "$dstarg"; then
echo "$0: no destination specified." >&2
exit 1
fi
dst=$dstarg
# Protect names starting with `-'.
case $dst in
-*) dst=./$dst ;;
esac
# If destination is a directory, append the input filename; won't work
# if double slashes aren't ignored.
if test -d "$dst"; then
if test -n "$no_target_directory"; then
echo "$0: $dstarg: Is a directory" >&2
exit 1
fi
dst=$dst/`basename "$src"`
fi
fi
# This sed command emulates the dirname command.
dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'`
# Make sure that the destination directory exists.
# Skip lots of stat calls in the usual case.
if test ! -d "$dstdir"; then
defaultIFS='
'
IFS="${IFS-$defaultIFS}"
oIFS=$IFS
# Some sh's can't handle IFS=/ for some reason.
IFS='%'
set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
shift
IFS=$oIFS
pathcomp=
while test $# -ne 0 ; do
pathcomp=$pathcomp$1
shift
if test ! -d "$pathcomp"; then
$mkdirprog "$pathcomp"
# mkdir can fail with a `File exist' error in case several
# install-sh are creating the directory concurrently. This
# is OK.
test -d "$pathcomp" || exit
fi
pathcomp=$pathcomp/
done
fi
if test -n "$dir_arg"; then
$doit $mkdircmd "$dst" \
&& { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
&& { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
&& { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
&& { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
else
dstfile=`basename "$dst"`
# Make a couple of temp file names in the proper directory.
dsttmp=$dstdir/_inst.$$_
rmtmp=$dstdir/_rm.$$_
# Trap to clean up those temp files at exit.
trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
trap '(exit $?); exit' 1 2 13 15
# Copy the file name to the temp name.
$doit $cpprog "$src" "$dsttmp" &&
# and set any options; do chmod last to preserve setuid bits.
#
# If any of these fail, we abort the whole thing. If we want to
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $cpprog $src $dsttmp" command.
#
{ test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
&& { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
&& { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
&& { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
# Now rename the file to the real destination.
{ $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
|| {
# The rename failed, perhaps because mv can't rename something else
# to itself, or perhaps because mv is so ancient that it does not
# support -f.
# Now remove or move aside any old file at destination location.
# We try this two ways since rm can't unlink itself on some
# systems and the destination file might be busy for other
# reasons. In this case, the final cleanup might fail but the new
# file should still install successfully.
{
if test -f "$dstdir/$dstfile"; then
$doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
|| $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
|| {
echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
(exit 1); exit 1
}
else
:
fi
} &&
# Now rename the file to the real destination.
$doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
}
}
fi || { (exit 1); exit 1; }
done
# The final little trick to "correctly" pass the exit status to the exit trap.
{
(exit 0); exit 0
}
# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-end: "$"
# End:
#! /bin/sh
# Common wrapper for a few potentially missing GNU programs.
scriptversion=2016-01-11.22; # UTC
# Copyright (C) 1996-2017 Free Software Foundation, Inc.
# Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
if test $# -eq 0; then
echo 1>&2 "Try '$0 --help' for more information"
exit 1
fi
case $1 in
--is-lightweight)
# Used by our autoconf macros to check whether the available missing
# script is modern enough.
exit 0
;;
--run)
# Back-compat with the calling convention used by older automake.
shift
;;
-h|--h|--he|--hel|--help)
echo "\
$0 [OPTION]... PROGRAM [ARGUMENT]...
Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due
to PROGRAM being missing or too old.
Options:
-h, --help display this help and exit
-v, --version output version information and exit
Supported PROGRAM values:
aclocal autoconf autoheader autom4te automake makeinfo
bison yacc flex lex help2man
Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
'g' are ignored when checking the name.
Send bug reports to <bug-automake@gnu.org>."
exit $?
;;
-v|--v|--ve|--ver|--vers|--versi|--versio|--version)
echo "missing $scriptversion (GNU Automake)"
exit $?
;;
-*)
echo 1>&2 "$0: unknown '$1' option"
echo 1>&2 "Try '$0 --help' for more information"
exit 1
;;
esac
# Run the given program, remember its exit status.
"$@"; st=$?
# If it succeeded, we are done.
test $st -eq 0 && exit 0
# Also exit now if we it failed (or wasn't found), and '--version' was
# passed; such an option is passed most likely to detect whether the
# program is present and works.
case $2 in --version|--help) exit $st;; esac
# Exit code 63 means version mismatch. This often happens when the user
# tries to use an ancient version of a tool on a file that requires a
# minimum version.
if test $st -eq 63; then
msg="probably too old"
elif test $st -eq 127; then
# Program was missing.
msg="missing on your system"
else
# Program was found and executed, but failed. Give up.
exit $st
fi
perl_URL=http://www.perl.org/
flex_URL=http://flex.sourceforge.net/
gnu_software_URL=http://www.gnu.org/software
program_details ()
{
case $1 in
aclocal|automake)
echo "The '$1' program is part of the GNU Automake package:"
echo "<$gnu_software_URL/automake>"
echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:"
echo "<$gnu_software_URL/autoconf>"
echo "<$gnu_software_URL/m4/>"
echo "<$perl_URL>"
;;
autoconf|autom4te|autoheader)
echo "The '$1' program is part of the GNU Autoconf package:"
echo "<$gnu_software_URL/autoconf/>"
echo "It also requires GNU m4 and Perl in order to run:"
echo "<$gnu_software_URL/m4/>"
echo "<$perl_URL>"
;;
esac
}
give_advice ()
{
# Normalize program name to check for.
normalized_program=`echo "$1" | sed '
s/^gnu-//; t
s/^gnu//; t
s/^g//; t'`
printf '%s\n' "'$1' is $msg."
configure_deps="'configure.ac' or m4 files included by 'configure.ac'"
case $normalized_program in
autoconf*)
echo "You should only need it if you modified 'configure.ac',"
echo "or m4 files included by it."
program_details 'autoconf'
;;
autoheader*)
echo "You should only need it if you modified 'acconfig.h' or"
echo "$configure_deps."
program_details 'autoheader'
;;
automake*)
echo "You should only need it if you modified 'Makefile.am' or"
echo "$configure_deps."
program_details 'automake'
;;
aclocal*)
echo "You should only need it if you modified 'acinclude.m4' or"
echo "$configure_deps."
program_details 'aclocal'
;;
autom4te*)
echo "You might have modified some maintainer files that require"
echo "the 'autom4te' program to be rebuilt."
program_details 'autom4te'
;;
bison*|yacc*)
echo "You should only need it if you modified a '.y' file."
echo "You may want to install the GNU Bison package:"
echo "<$gnu_software_URL/bison/>"
;;
lex*|flex*)
echo "You should only need it if you modified a '.l' file."
echo "You may want to install the Fast Lexical Analyzer package:"
echo "<$flex_URL>"
;;
help2man*)
echo "You should only need it if you modified a dependency" \
"of a man page."
echo "You may want to install the GNU Help2man package:"
echo "<$gnu_software_URL/help2man/>"
;;
makeinfo*)
echo "You should only need it if you modified a '.texi' file, or"
echo "any other file indirectly affecting the aspect of the manual."
echo "You might want to install the Texinfo package:"
echo "<$gnu_software_URL/texinfo/>"
echo "The spurious makeinfo call might also be the consequence of"
echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might"
echo "want to install GNU make:"
echo "<$gnu_software_URL/make/>"
;;
*)
echo "You might have modified some files without having the proper"
echo "tools for further handling them. Check the 'README' file, it"
echo "often tells you about the needed prerequisites for installing"
echo "this package. You may also peek at any GNU archive site, in"
echo "case some other package contains this missing '$1' program."
;;
esac
}
give_advice "$1" | sed -e '1s/^/WARNING: /' \
-e '2,$s/^/ /' >&2
# Propagate the correct exit status (expected to be 127 for a program
# not found, 63 for a program that failed due to version mismatch).
exit $st
# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="