Combined 'dQ()' and 'Sh()' into 'Qdot()' which returns the heat-release rate in
the normal units [kg/m/s3] and used as the heat release rate source term in
the energy equations, to set the field 'Qdot' in several combustion solvers
and for the evaluation of the local time-step when running LTS.

See bug-report https://bugs.openfoam.org/view.php?id=2387

Resolves bug-report https://bugs.openfoam.org/view.php?id=2387

Patch contributed by Juho Peltola, VTT.

Patch contributed by Juho Peltola, VTT

sprayFoam: Added support for the optional 'solveFlow' control to allow
           simulation of the spray evolution with all sub-models in a 'frozen'
           flow-field.

defined by functionObjects, e.g. wallHeatFlux, wallShearStress and yPlus.

Patch contributed by Bruno Santos
Resolves bug-report http://bugs.openfoam.org/view.php?id=2353

Patch contributed by Mattijs Janssens
http://bugs.openfoam.org/view.php?id=2382

which provided warning about backward-compatibility issue with setting div
schemes for steady-state.  It caused confusion by generating incorrect warning
messages for compressible cases for which the 'bounded' should NOT be applied to
the 'div(phid,p)'.

to clarify purpose.

Patch contributed by Mattijs Janssens

Patch contributed by Mattijs Janssens
Resolves bug-report http://bugs.openfoam.org/view.php?id=2380

Patch contributed by Battijs Janssens
Resolves bug-report http://bugs.openfoam.org/view.php?id=2383

Patch contributed by Mattijs Janssens

tutorials/incompressible/pisoFoam/les/motorBike/motorBike/Allrun: Removed spurious '-parallel' option

Resolves bug-report http://bugs.openfoam.org/view.php?id=2378

Resolves bug-report http://bugs.openfoam.org/view.php?id=2372

Resolves bug-report http://bugs.openfoam.org/view.php?id=2374

Resolves bug-report http://bugs.openfoam.org/view.php?id=2373

Patch contributed by Mattijs Janssens
Resolves bug-report http://bugs.openfoam.org/view.php?id=2323

Resolves bug-report http://bugs.openfoam.org/view.php?id=2370

Resolves bug-report http://bugs.openfoam.org/view.php?id=2366

Patch contributed by Mattijs Janssens
Resolves bug-report http://bugs.openfoam.org/view.php?id=2358

Patch contributed by Mattijs Janssens

Patch contributed by Mattijs Janssens
Resolves bug-report http://bugs.openfoam.org/view.php?id=2368

Patch contributed by Mattijs Janssens
Resolves bug-report http://bugs.openfoam.org/view.php?id=2363

Resolves request http://bugs.openfoam.org/view.php?id=2367

e.g. the motion of two counter-rotating AMI regions could be defined:

dynamicFvMesh   dynamicMotionSolverListFvMesh;

solvers
(
    rotor1
    {
        solver solidBody;

        cellZone        rotor1;

        solidBodyMotionFunction  rotatingMotion;
        rotatingMotionCoeffs
        {
            origin        (0 0 0);
            axis          (0 0 1);
            omega         6.2832; // rad/s
        }
    }

    rotor2
    {
        solver solidBody;

        cellZone        rotor2;

        solidBodyMotionFunction  rotatingMotion;
        rotatingMotionCoeffs
        {
            origin        (0 0 0);
            axis          (0 0 1);
            omega         -6.2832; // rad/s
        }
    }
);

Any combination of motion solvers may be selected but there is no special
handling of motion interaction; the motions are applied sequentially and
potentially cumulatively.

To support this new general framework the solidBodyMotionFvMesh and
multiSolidBodyMotionFvMesh dynamicFvMeshes have been converted into the
corresponding motionSolvers solidBody and multiSolidBody and the tutorials
updated to reflect this change e.g. the motion in the mixerVesselAMI2D tutorial
is now defined thus:

dynamicFvMesh   dynamicMotionSolverFvMesh;

solver solidBody;

solidBodyCoeffs
{
    cellZone        rotor;

    solidBodyMotionFunction  rotatingMotion;
    rotatingMotionCoeffs
    {
        origin        (0 0 0);
        axis          (0 0 1);
        omega         6.2832; // rad/s
    }
}

Resolves request http://bugs.openfoam.org/view.php?id=2364