Patch contributed by Bruno Santos
Resolves bug-report https://bugs.openfoam.org/view.php?id=2408

Based on patch contributed by Kevin Nordin-Bates
Resolves bug-report https://bugs.openfoam.org/view.php?id=2401

e.g. in the reactingFoam/laminar/counterFlowFlame2DLTS tutorial:

PIMPLE
{
    momentumPredictor no;
    nOuterCorrectors  1;
    nCorrectors     1;
    nNonOrthogonalCorrectors 0;

    maxDeltaT       1e-2;
    maxCo           1;
    alphaTemp       0.05;
    alphaY          0.05;
    Yref
    {
        O2          0.1;
        ".*"        1;
    }
    rDeltaTSmoothingCoeff 1;
    rDeltaTDampingCoeff 1;
}

will limit the LTS time-step according to the rate of consumption of 'O2'
normalized by the reference mass-fraction of 0.1 and all other species
normalized by the reference mass-fraction of 1.  Additionally the time-step
factor of 'alphaY' is applied to all species.  Only the species specified in the
'Yref' sub-dictionary are included in the LTS limiter and if 'alphaY' is omitted
or set to 1 the reaction rates are not included in the LTS limiter.

Resolves bug-report https://bugs.openfoam.org/view.php?id=2398

Combined 'dQ()' and 'Sh()' into 'Qdot()' which returns the heat-release rate in
the normal units [kg/m/s3] and used as the heat release rate source term in
the energy equations, to set the field 'Qdot' in several combustion solvers
and for the evaluation of the local time-step when running LTS.

See bug-report https://bugs.openfoam.org/view.php?id=2387

Resolves bug-report https://bugs.openfoam.org/view.php?id=2387

Patch contributed by Juho Peltola, VTT.

Patch contributed by Juho Peltola, VTT

sprayFoam: Added support for the optional 'solveFlow' control to allow
           simulation of the spray evolution with all sub-models in a 'frozen'
           flow-field.

defined by functionObjects, e.g. wallHeatFlux, wallShearStress and yPlus.

Patch contributed by Bruno Santos
Resolves bug-report http://bugs.openfoam.org/view.php?id=2353

Patch contributed by Mattijs Janssens
http://bugs.openfoam.org/view.php?id=2382

which provided warning about backward-compatibility issue with setting div
schemes for steady-state.  It caused confusion by generating incorrect warning
messages for compressible cases for which the 'bounded' should NOT be applied to
the 'div(phid,p)'.

to clarify purpose.

Patch contributed by Mattijs Janssens

Patch contributed by Mattijs Janssens
Resolves bug-report http://bugs.openfoam.org/view.php?id=2380

Patch contributed by Battijs Janssens
Resolves bug-report http://bugs.openfoam.org/view.php?id=2383

Patch contributed by Mattijs Janssens

tutorials/incompressible/pisoFoam/les/motorBike/motorBike/Allrun: Removed spurious '-parallel' option

Resolves bug-report http://bugs.openfoam.org/view.php?id=2378

Resolves bug-report http://bugs.openfoam.org/view.php?id=2372

Resolves bug-report http://bugs.openfoam.org/view.php?id=2374

Resolves bug-report http://bugs.openfoam.org/view.php?id=2373

Patch contributed by Mattijs Janssens
Resolves bug-report http://bugs.openfoam.org/view.php?id=2323

Resolves bug-report http://bugs.openfoam.org/view.php?id=2370

Resolves bug-report http://bugs.openfoam.org/view.php?id=2366

Patch contributed by Mattijs Janssens
Resolves bug-report http://bugs.openfoam.org/view.php?id=2358

Patch contributed by Mattijs Janssens

Patch contributed by Mattijs Janssens
Resolves bug-report http://bugs.openfoam.org/view.php?id=2368

Patch contributed by Mattijs Janssens
Resolves bug-report http://bugs.openfoam.org/view.php?id=2363