Newer
Older
# -*- mode: org; -*-
#
#+TITLE: OpenFOAM C++ style guide
#+DATE: Feb 2011
#+LINK: http://www.opencfd.co.uk
#+OPTIONS: author:nil ^:{}
#+STARTUP: hidestars
#+STARTUP: odd
* OpenFOAM C++ style guide
*** General
+ 80 character lines max
+ The normal indentation is 4 spaces per logical level.
+ Use spaces for indentation, not tab characters.
+ The body of control statements (eg, =if=, =else=, =while=, etc). is
always delineated with brace brackets. A possible exception can be
made in conjunction with =break= or =continue= as part of a control
structure.
+ The body of =case= statements is usually delineated with brace brackets.
+ A fall-through =case= should be commented as such.
+ =<<= is always four characters after the start of the stream,
so that the =<<= symbols align, i.e.
Info<< ...
os << ...
WarningIn("className::functionName()")
<< "Warning message"
#+END_SRC
*not*
#+BEGIN_SRC C++
WarningIn("className::functionName()")
<< "Warning message"
+ no unnecessary class section headers, i.e. remove
// * * * * * * * * * * * * * Private Member Functions * * * * * * * * * * * //
// Check
// Edit
// Write
if they contain nothing, even if planned for 'future use'
+ class titles are centred
/*---------------------------------------------------------------------------*\
Class exampleClass Declaration
\*---------------------------------------------------------------------------*/
/*---------------------------------------------------------------------------*\
Class exampleClass Declaration
\*---------------------------------------------------------------------------*/
*** The /.H/ Files
+ Leave two empty lines between sections
(as per functions in the /.C/ file etc)
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
+ use =//- Comment= comments in header file to add descriptions to class
data and functions do be included in the Doxygen documentation:
+ text on the line starting with =//-= becomes the Doxygen brief
description;
+ text on subsequent lines becomes the Doxygen detailed description /e.g./
#+BEGIN_SRC C++
//- A function which returns a thing
// This is a detailed description of the function
// which processes stuff and returns other stuff
// depending on things.
thing function(stuff1, stuff2);
#+END_SRC
+ list entries start with =-= or =-#= for numbered lists but cannot start
on the line immediately below the brief description so
#+BEGIN_SRC C++
//- Compare triFaces
// Returns:
// - 0: different
// - +1: identical
// - -1: same face, but different orientation
static inline int compare(const triFace&, const triFace&);
#+END_SRC
or
#+BEGIN_SRC C++
//- Compare triFaces returning 0, +1 or -1
//
// - 0: different
// - +1: identical
// - -1: same face, but different orientation
static inline int compare(const triFace&, const triFace&);
#+END_SRC
*not*
#+BEGIN_SRC C++
//- Compare triFaces returning 0, +1 or -1
// - 0: different
// - +1: identical
// - -1: same face, but different orientation
static inline int compare(const triFace&, const triFace&);
#+END_SRC
+ list can be nested for example
#+BEGIN_SRC C++
//- Search for \em name
// in the following hierarchy:
// -# personal settings:
// - ~/.OpenFOAM/\<VERSION\>/
// <em>for version-specific files</em>
// - ~/.OpenFOAM/
// <em>for version-independent files</em>
// -# site-wide settings:
// - $WM_PROJECT_INST_DIR/site/\<VERSION\>
// <em>for version-specific files</em>
// - $WM_PROJECT_INST_DIR/site/
// <em>for version-independent files</em>
// -# shipped settings:
// - $WM_PROJECT_DIR/etc/
//
// \return the full path name or fileName() if the name cannot be found
// Optionally abort if the file cannot be found
fileName findEtcFile(const fileName&, bool mandatory=false);
#+END_SRC
+ for more details see the Doxygen documentation.
+ If adding a comment to the destructor -
use =//-= and code as a normal function:
#+BEGIN_SRC C++
//- Destructor
~className();
+ Use inline functions where appropriate in a separate /classNameI.H/
file. Avoid cluttering the header file with function bodies.
*** The /.C/ Files
+ Do not open/close namespaces in a /.C/ file
+ Fully scope the function name, i.e.
#+BEGIN_SRC C++
Foam::returnType Foam::className::functionName()
#+END_SRC
*not*
#+BEGIN_SRC C++
namespace Foam
{
...
returnType className::functionName()
...
}
EXCEPTION
When there are multiple levels of namespace, they may be used in the
/.C/ file, i.e.
#+BEGIN_SRC C++
namespace Foam
{
namespace compressible
{
namespace RASModels
{
...
} // End namespace RASModels
} // End namespace compressible
} // End namespace Foam
+ Use two empty lines between functions
+ passing data as arguments or return values.
+ Pass bool, label and scalar as copy, anything larger by reference.
+ Use everywhere it is applicable.
+ variable initialisation using
#+BEGIN_SRC C++
const className& variableName = otherClass.data();
#+END_SRC
*not*
#+BEGIN_SRC C++
const className& variableName(otherClass.data());
+ If a class is virtual, make all derived classes virtual.
*** Conditional Statements
#+BEGIN_SRC C++
if (condition)
{
code;
}
#+BEGIN_SRC C++
if
(
long condition
)
{
code;
}
#+END_SRC
*not* (no space between =if= and =(= used)
#+BEGIN_SRC C++
if(condition)
{
code;
}
#+BEGIN_SRC C++
for (i = 0; i < maxI; i++)
{
code;
}
#+BEGIN_SRC C++
for
(
i = 0;
i < maxI;
i++
)
{
code;
}
#+END_SRC
*not* this (no space between =for= and =(= used)
#+BEGIN_SRC C++
for(i = 0; i < maxI; i++)
{
code;
}
Note that when indexing through iterators, it is often slightly more
efficient to use the pre-increment form. Eg, =++iter= instead of =iter++=
*** =forAll=, =forAllIter=, =forAllConstIter=, etc. loops
#+BEGIN_SRC C++
forAll(
#+END_SRC
*not*
#+BEGIN_SRC C++
forAll (
Using the =forAllIter= and =forAllConstIter= macros is generally
advantageous - less typing, easier to find later. However, since
they are macros, they will fail if the iterated object contains
any commas.
The following will FAIL!:
#+BEGIN_SRC C++
forAllIter(HashTable<labelPair, edge, Hash<edge> >, foo, iter)
These convenience macros are also generally avoided in other
container classes and OpenFOAM primitive classes.
*** Splitting Over Multiple Lines
***** Splitting return type and function name
+ split initially after the function return type and left align
+ do not put =const= onto its own line - use a split to keep it with
the function name and arguments.
#+BEGIN_SRC C++
const Foam::longReturnTypeName&
Foam::longClassName::longFunctionName const
#+END_SRC
*not*
#+BEGIN_SRC C++
const Foam::longReturnTypeName&
Foam::longClassName::longFunctionName const
#+END_SRC
*nor*
#+BEGIN_SRC C++
const Foam::longReturnTypeName& Foam::longClassName::longFunctionName
const
#+END_SRC
*nor*
#+BEGIN_SRC C++
const Foam::longReturnTypeName& Foam::longClassName::
longFunctionName const
+ if it needs to be split again, split at the function name (leaving
behind the preceding scoping =::=s), and again, left align, i.e.
#+BEGIN_SRC C++
const Foam::longReturnTypeName&
Foam::veryveryveryverylongClassName::
veryveryveryverylongFunctionName const
***** Splitting long lines at an "="
#+BEGIN_SRC C++
variableName =
longClassName.longFunctionName(longArgument);
#+BEGIN_SRC C++
variableName =
longClassName.longFunctionName
(
longArgument1,
longArgument2
);
#+END_SRC
*not*
#+BEGIN_SRC C++
variableName =
longClassName.longFunctionName(longArgument);
#+END_SRC
*nor*
#+BEGIN_SRC C++
variableName = longClassName.longFunctionName
(
longArgument1,
longArgument2
);
*** Maths and Logic
+ operator spacing
#+BEGIN_SRC C++
a + b, a - b
a*b, a/b
a & b, a ^ b
a = b, a != b
a < b, a > b, a >= b, a <= b
a || b, a && b
+ splitting formulae over several lines
Split and indent as per "splitting long lines at an ="
with the operator on the lower line. Align operator so that first
variable, function or bracket on the next line is 4 spaces indented i.e.
#+BEGIN_SRC C++
variableName =
a*(a + b)
*exp(c/d)
*(k + t);
This is sometimes more legible when surrounded by extra parentheses:
#+BEGIN_SRC C++
variableName =
(
a*(a + b)
*exp(c/d)
*(k + t)
);
+ splitting logical tests over several lines
outdent the operator so that the next variable to test is aligned with
the four space indentation, i.e.
#+BEGIN_SRC C++
if
(
a == true
&& b == c
)
** Documentation
*** General
+ For readability in the comment blocks, certain tags are used that are
translated by pre-filtering the file before sending it to Doxygen.
+ The tags start in column 1, the contents follow on the next lines and
indented by 4 spaces. The filter removes the leading 4 spaces from the
following lines until the next tag that starts in column 1.
+ The 'Class' and 'Description' tags are the most important ones.
+ The first paragraph following the 'Description' will be used for the
brief description, the remaining paragraphs become the detailed
description.
For example,
#+BEGIN_SRC C++
Class
Foam::myClass
Description
A class for specifying the documentation style.
The class is implemented as a set of recommendations that may
sometimes be useful.
+ The class name must be qualified by its namespace, otherwise Doxygen
will think you are documenting some other class.
+ If you don't have anything to say about the class (at the moment), use
the namespace-qualified class name for the description. This aids with
finding these under-documented classes later.
#+BEGIN_SRC C++
Class
Foam::myUnderDocumentedClass
Description
Foam::myUnderDocumentedClass
+ Use 'Class' and 'Namespace' tags in the header files.
The Description block then applies to documenting the class.
+ Use 'InClass' and 'InNamespace' in the source files.
The Description block then applies to documenting the file itself.
#+BEGIN_SRC C++
InClass
Foam::myClass
Description
Implements the read and writing of files.
*** Doxygen Special Commands
Doxygen has a large number of special commands with a =\= prefix.
Since the filtering removes the leading spaces within the blocks, the
Doxygen commmands can be inserted within the block without problems.
#+BEGIN_SRC C++
InClass
Foam::myClass
Description
Implements the read and writing of files.
An example input file:
\verbatim
patchName
{
type myPatchType;
refValue 100;
value uniform 1;
}
\endverbatim
Within the implementation, a loop over all patches is done:
forAll(patches, patchI)
{
... // some operation
}
\endcode
*** HTML Special Commands
Since Doxygen also handles HTML tags to a certain extent, the angle
brackets need quoting in the documentation blocks. Non-HTML tags cause
Doxygen to complain, but seem to work anyhow.
eg,
+ The template with type =<HR>= is a bad example.
+ The template with type =\<HR\>= is a better example.
+ The template with type =<Type>= causes Doxygen to complain about an
unknown html type, but it seems to work okay anyhow.
*** Documenting Namespaces
+ If namespaces are explictly declared with the =Namespace()= macro,
they should be documented there.
+ If the namespaces is used to hold sub-models, the namespace can be
documented in the same file as the class with the model selector.
eg,
#+BEGIN_SRC C++
documented namespace 'Foam::functionEntries' within the
class 'Foam::functionEntry'
+ If nothing else helps, find some sensible header.
eg,
#+BEGIN_SRC C++
namespace 'Foam' is documented in the foamVersion.H file
*** Documenting typedefs and classes defined via macros
... not yet properly resolved
*** Documenting Applications
Any number of classes might be defined by a particular application, but
these classes will not, however, be available to other parts of
OpenFOAM. At the moment, the sole purpuse for running Doxygen on the
applications is to extract program usage information for the '-doc'
option.
The documentation for a particular application is normally contained
within the first comment block in a /.C/ source file. The solution is this
to invoke a special filter for the "/applications/{solver,utilities}/"
directories that only allows the initial comment block for the /.C/ files
through.
The layout of the application documentation has not yet been finalized,
but foamToVTK shows an initial attempt.
*** Orthography
Given the origins of OpenFOAM, the British spellings (eg, neighbour and not
neighbor) are generally favoured.
Both '-ize' and the '-ise' variant are found in the code comments. If
used as a variable or class method name, it is probably better to use
'-ize', which is considered the main form by the Oxford University
Press. Eg,
#+BEGIN_SRC C++
myClass.initialize()
The word "its" (possesive) vs. "it's" (colloquial for "it is" or "it has")
seems to confuse non-native (and some native) English speakers.
It is better to donate the extra keystrokes and write "it is" or "it has".
Any remaining "it's" are likely an incorrect spelling of "its".