Newer
Older
## OpenFOAM® System Requirements
OpenFOAM requires a functioning C++11 compiler and GNU `make` build toolchain.
### Minimum recommended versions
- gcc : 4.8.5 (absolute minimum, not really recommended)
- cmake: 3.8 (required for ParaView and CGAL build)
- boost: 1.48 (required for CGAL build and some functionality)
- fftw: 3.3.7 (recommended - required for FFT-related functionality)
- paraview: 5.6.3 (for visualization)
If using the Intel® compiler, `17.0.1 20161005` is the minimum
usable version.
To check the installed versions
| Program | To check the version |
|---------------|-----------------------|
| gcc | `gcc --version` |
| clang | `clang --version` |
| icc (intel) | `icc --version` |
| cmake | `cmake --version` |
| openmpi | `orterun --version` |
#### Cautionary note for system openmpi
When using system openmpi, some caution is required due to the
[openmpi issue 5375](https://github.com/open-mpi/ompi/issues/5375) that
affected several versions of the openmpi2 or openmpi3 series.
| series | major/minor | Minimum version
|-----------|-------------|-------------------|
| openmpi1 | all | not affected |
| openmpi2 | 2.0 | avoid this series |
| openmpi2 | 2.1 | 2.1.6 |
| openmpi3 | 3.0 | 3.0.4 |
| openmpi3 | 3.1 | 3.1.4 |
| openmpi4 | all | not affected |
- flex : ***not 2.6.2, 2.6.3*** (fails for building scotch)
- m4 : no known minimum level
- QT : 5.9 (optional - for ParaView build)
Install dependencies by executing the following lines on the command line:
```
sudo apt-get update
sudo apt-get install build-essential autoconf autotools-dev cmake gawk gnuplot
sudo apt-get install flex libfl-dev libreadline-dev zlib1g-dev openmpi-bin libopenmpi-dev mpi-default-bin mpi-default-dev
sudo apt-get install libgmp-dev libmpfr-dev libmpc-dev
```
To inspect the available system versions, use the `apt-cache show`
command. For example,
sudo apt-cache show libopenmpi-dev
| Program | Ubuntu | Program version |
|-----------|-----------|-----------------|
| gcc | 22.04 | 11.3.0 |
| openmpi | 22.04 | 4.1.2 |
| cmake | 22.04 | 3.22.1 |
| flex | 22.04 | 2.6.4 |
| m4 | 22.04 | 1.4.18 |
If you intend to use system components, you can also install the following:
apt-get install libfftw3-dev libscotch-dev libptscotch-dev libboost-system-dev libboost-thread-dev libcgal-dev
```
| Program | apt-cache show | Ubuntu | Version |
|-----------|-----------------|---------|---------|
| boost | libboost-dev | 22.04 | 1.74.0 |
| CGAL | libcgal-dev | 22.04 | 5.4.1 |
| FFTW | libfftw3-dev | 22.04 | 3.3.8 |
| scotch | libscotch-dev | 22.04 | 6.1.3 |
Some libraries can be installed from the operating system, or
compiled from the ThirdParty directory.
The default configuration for OpenFOAM assumes OpenMPI from the system
and ThirdParty installations for most others (boost, CGAL, FFTW,
Kahip, Scotch). This is generally the most portable configuration
across various Linux distributions, but it may be desirable to use
more system libraries on Ubuntu.
### openSUSE (eg, Leap-15.4)
Install the dependencies by copying and pasting the following lines to
the command line:
```
sudo zypper install -t pattern devel_C_C++
sudo zypper install cmake gnuplot flex libfl-devel readline-devel zlib-devel openmpi4-devel
sudo zypper install gmp-devel mpfr-devel mpc-devel
```
If you intend to use system components, you can also install the following:
```
sudo zypper install fftw3-devel libboost_system-devel libboost_thread-devel
but note that scotch and cgal are only available via the science repository.
For boost, you may need to specify a specific version. For example,
```
sudo zypper install fftw3-devel libboost_system1_75_0-devel libboost_thread1_75_0-devel
```
This installs
| Program | openSUSE | Program version |
|-----------|-----------|-----------------|
| gcc | 15.4 | 7.5.0 |
| openmpi | 15.4 | 2.1.6 |
| openmpi | 15.4 | 4.1.1 |
| cmake | 15.4 | 3.20.4 |
| flex | 15.4 | 2.6.4 |
| m4 | 15.4 | 1.4.18 |
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
#### OpenMPI
Check that the openmpi installation can be found:
```
orterun --version
```
And the command `mpicc --show` should display a complete compilation
line. This information is used in OpenFOAM to obtain the
compilation and link options.
For openSUSE it is common that this command cannot be found.
The reason being that the operating system can have several different
MPI vendors and versions installed and the user or sysadmin needs to
defined the preferred MPI. For this task, the `mpi-selector` and
`mpi-selector-menu` programs are used. These are automatically installed
by the system when openmpi has been installed.
If openmpi has been selected, the output will resemble the following:
```
$ mpi-selector --query
default:openmpi
level:user
```
If this is not the case, the `mpi-selector-menu` can be used to define
the preferred default.
***Note that changes in the preferred MPI do not take effect until the
next login.***
If all else fails, a brute force solution can also be used by simply
adding the corresponding lines to the `$HOME/.bashrc` file:
```
export PATH=$PATH:/usr/lib64/mpi/gcc/openmpi/bin
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/lib64/mpi/gcc/openmpi/lib
```
This solution is not particularly nice, but may also be necessary if
some other part of the operating system installation is incomplete.
### Using IntelMPI
To run with IntelMPI, the LD_PRELOAD environment variable can be used
to pre-load the appropriate Intel® MPI binding library. For more
details, see INTELMPI release note page 13.
The following line can be the `$HOME/.bashrc` file:
```
export LD_PRELOAD="libmpi.so"
```
### Additional libraries
When compiled [ParaView][page ParaView] from source additional dependencies will be
A partial list is given in the [ThirdParty requirements][link third-require].
However it is ***recommended*** to skipped this initially since
it generally represents the main compilation difficulty encountered.
In many cases, a system installation of paraview or a
[precompiled binary][download ParaView]
will be much easier and likely
[fully adequate for your needs][FAQ ParaView].
Since any ParaView/VTK dependencies are isolated within the
visualization module, it is always possible to compile plugins for
different ParaView versions as well as different VTK/Mesa combinations
at any later stage _without_ recompiling OpenFOAM itself.
[page ParaView]: http://www.paraview.org/
[download ParaView]: https://www.paraview.org/download/
[FAQ ParaView]: https://discourse.paraview.org/t/i-want-to-visualize-my-openfoam-simulation-results-with-paraview-but-im-confused-which-version-should-i-use
<!-- OpenFOAM -->
[link openfoam-readme]: https://develop.openfoam.com/Development/openfoam/blob/develop/README.md
[link openfoam-build]: https://develop.openfoam.com/Development/openfoam/blob/develop/doc/Build.md
[link openfoam-require]: https://develop.openfoam.com/Development/openfoam/blob/develop/doc/Requirements.md
[link third-readme]: https://develop.openfoam.com/Development/ThirdParty-common/blob/develop/README.md
[link third-build]: https://develop.openfoam.com/Development/ThirdParty-common/blob/develop/BUILD.md
[link third-require]: https://develop.openfoam.com/Development/ThirdParty-common/blob/develop/Requirements.md
[wiki-config]: https://develop.openfoam.com/Development/openfoam/-/wikis/configuring
Copyright 2019-2022 OpenCFD Ltd