ENH: motorBike: moved meshQuality into separate dictionary

tutorials/incompressible/simpleFoam/motorBike/system/meshQualityDict

+/*--------------------------------*- C++ -*----------------------------------*\
+| =========                 |                                                 |
+| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
+|  \\    /   O peration     | Version:  dev                                   |
+|   \\  /    A nd           | Web:      www.OpenFOAM.org                      |
+|    \\/     M anipulation  |                                                 |
+\*---------------------------------------------------------------------------*/
+FoamFile
+{
+    version     2.0;
+    format      ascii;
+    class       dictionary;
+    object      meshQualityDict;
+}
+// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
+
+//- Maximum non-orthogonality allowed. Set to 180 to disable.
+maxNonOrtho 65;
+
+//- Max skewness allowed. Set to <0 to disable.
+maxBoundarySkewness 20;
+maxInternalSkewness 4;
+
+//- Max concaveness allowed. Is angle (in degrees) below which concavity
+//  is allowed. 0 is straight face, <0 would be convex face.
+//  Set to 180 to disable.
+maxConcave 80;
+
+//- Minimum pyramid volume. Is absolute volume of cell pyramid.
+//  Set to a sensible fraction of the smallest cell volume expected.
+//  Set to very negative number (e.g. -1E30) to disable.
+minVol 1e-13;
+
+//- Minimum quality of the tet formed by the face-centre
+//  and variable base point minimum decomposition triangles and
+//  the cell centre. This has to be a positive number for tracking
+//  to work. Set to very negative number (e.g. -1E30) to
+//  disable.
+//     <0 = inside out tet,
+//      0 = flat tet
+//      1 = regular tet
+minTetQuality 1e-30;
+
+//- Minimum face area. Set to <0 to disable.
+minArea -1;
+
+//- Minimum face twist. Set to <-1 to disable. dot product of face normal
+//- and face centre triangles normal
+minTwist 0.02;
+
+//- minimum normalised cell determinant
+//- 1 = hex, <= 0 = folded or flattened illegal cell
+minDeterminant 0.001;
+
+//- minFaceWeight (0 -> 0.5)
+minFaceWeight 0.02;
+
+//- minVolRatio (0 -> 1)
+minVolRatio 0.01;
+
+//must be >0 for Fluent compatibility
+minTriangleTwist -1;
+
+
+// ************************************************************************* //

tutorials/incompressible/simpleFoam/motorBike/system/snappyHexMeshDict

@@ -297,52 +297,7 @@ addLayersControls
 // where to undo.
 meshQualityControls
 {
-    //- Maximum non-orthogonality allowed. Set to 180 to disable.
-    maxNonOrtho 65;
-
-    //- Max skewness allowed. Set to <0 to disable.
-    maxBoundarySkewness 20;
-    maxInternalSkewness 4;
-
-    //- Max concaveness allowed. Is angle (in degrees) below which concavity
-    //  is allowed. 0 is straight face, <0 would be convex face.
-    //  Set to 180 to disable.
-    maxConcave 80;
-
-    //- Minimum pyramid volume. Is absolute volume of cell pyramid.
-    //  Set to a sensible fraction of the smallest cell volume expected.
-    //  Set to very negative number (e.g. -1E30) to disable.
-    minVol 1e-13;
-
-    //- Minimum quality of the tet formed by the face-centre
-    //  and variable base point minimum decomposition triangles and
-    //  the cell centre. This has to be a positive number for tracking
-    //  to work. Set to very negative number (e.g. -1E30) to
-    //  disable.
-    //     <0 = inside out tet,
-    //      0 = flat tet
-    //      1 = regular tet
-    minTetQuality 1e-30;
-
-    //- Minimum face area. Set to <0 to disable.
-    minArea -1;
-
-    //- Minimum face twist. Set to <-1 to disable. dot product of face normal
-    //- and face centre triangles normal
-    minTwist 0.02;
-
-    //- minimum normalised cell determinant
-    //- 1 = hex, <= 0 = folded or flattened illegal cell
-    minDeterminant 0.001;
-
-    //- minFaceWeight (0 -> 0.5)
-    minFaceWeight 0.02;
-
-    //- minVolRatio (0 -> 1)
-    minVolRatio 0.01;
-
-    //must be >0 for Fluent compatibility
-    minTriangleTwist -1;
+    #include "meshQualityDict"
 
 
     // Advanced