ENH: blob: updated tutorial

tutorials/mesh/cvMesh/blob/Allrun

@@ -6,7 +6,8 @@ cd ${0%/*} || exit 1    # run from this directory
 
 runApplication blockMesh
 runApplication cvMesh
-runApplication snappyHexMesh
+#runApplication collapseEdges 1e-10 180 -overwrite
+runApplication snappyHexMesh -overwrite
 runApplication checkMesh -constant -allGeometry -allTopology
 
 # ----------------------------------------------------------------- end-of-file

tutorials/mesh/cvMesh/blob/system/cvMeshDict

@@ -92,6 +92,8 @@ surfaceConformation
 
     surfaceConformationRebuildFrequency 10;
 
+    specialiseFeaturePoints off;
+
     conformationControls
     {
         initial
@@ -230,18 +232,8 @@ polyMeshFiltering
 
 meshQualityControls
 {
-    maxNonOrtho         65;
-    maxBoundarySkewness 50;
-    maxInternalSkewness 10;
-    maxConcave          80;
-    minVol              1e-20;
-    minTetQuality       1e-30;
-    minArea             -1;
-    minTwist            0.0;
-    minDeterminant      0.001;
-    minFaceWeight       0.02;
-    minVolRatio         0.01;
-    minTriangleTwist    -1;
+    #include "meshQualityDict"
 }
 
+
 // ************************************************************************* //

tutorials/mesh/cvMesh/blob/system/snappyHexMeshDict

@@ -282,53 +282,7 @@ addLayersControls
 // where to undo.
 meshQualityControls
 {
-    //- Maximum non-orthogonality allowed. Set to 180 to disable.
-    maxNonOrtho 65;
-
-    //- Max skewness allowed. Set to <0 to disable.
-    maxBoundarySkewness 20;
-    maxInternalSkewness 4;
-
-    //- Max concaveness allowed. Is angle (in degrees) below which concavity
-    //  is allowed. 0 is straight face, <0 would be convex face.
-    //  Set to 180 to disable.
-    maxConcave 80;
-
-    //- Minimum pyramid volume. Is absolute volume of cell pyramid.
-    //  Set to a sensible fraction of the smallest cell volume expected.
-    //  Set to very negative number (e.g. -1E30) to disable.
-    minVol 1e-13;
-
-    //- Minimum quality of the tet formed by the face-centre
-    //  and variable base point minimum decomposition triangles and
-    //  the cell centre. This has to be a positive number for tracking
-    //  to work. Set to very negative number (e.g. -1E30) to
-    //  disable.
-    //     <0 = inside out tet,
-    //      0 = flat tet
-    //      1 = regular tet
-    minTetQuality -1;   //1e-30;
-
-    //- Minimum face area. Set to <0 to disable.
-    minArea -1;
-
-    //- Minimum face twist. Set to <-1 to disable. dot product of face normal
-    //- and face centre triangles normal
-    minTwist 0.02;
-
-    //- minimum normalised cell determinant
-    //- 1 = hex, <= 0 = folded or flattened illegal cell
-    minDeterminant 0.001;
-
-    //- minFaceWeight (0 -> 0.5)
-    minFaceWeight 0.02;
-
-    //- minVolRatio (0 -> 1)
-    minVolRatio 0.01;
-
-    //must be >0 for Fluent compatibility
-    minTriangleTwist -1;
-
+    #include "meshQualityDict"
 
     // Advanced