Modified Description entries for documenting purposes

applications/solvers/combustion/PDRFoam/PDRFoam.C

@@ -26,8 +26,8 @@ Application
     PDRFoam
 
 Description
-    Compressible premixed/partially-premixed combustion solver with turbulence
-    modelling.
+    Solver for compressible premixed/partially-premixed combustion with
+    turbulence modelling.
 
     Combusting RANS code using the b-Xi two-equation model.
     Xi may be obtained by either the solution of the Xi transport

applications/solvers/combustion/XiFoam/XiFoam.C

@@ -26,8 +26,8 @@ Application
     XiFoam
 
 Description
-    Compressible premixed/partially-premixed combustion solver with turbulence
-    modelling.
+    Solver for compressible premixed/partially-premixed combustion with
+    turbulence modelling.
 
     Combusting RANS code using the b-Xi two-equation model.
     Xi may be obtained by either the solution of the Xi transport

applications/solvers/combustion/dieselEngineFoam/dieselEngineFoam.C

@@ -26,7 +26,7 @@ Application
     dieselFoam
 
 Description
-    Diesel engine spray and combustion code.
+    Solver for diesel engine spray and combustion.
 
 \*---------------------------------------------------------------------------*/
 

applications/solvers/combustion/dieselFoam/dieselFoam.C

@@ -26,7 +26,7 @@ Application
     dieselFoam
 
 Description
-    Diesel spray and combustion code.
+    Solver for diesel spray and combustion.
 
 \*---------------------------------------------------------------------------*/
 

applications/solvers/combustion/reactingFoam/reactingFoam.C

@@ -26,7 +26,7 @@ Application
     reactingFoam
 
 Description
-    Chemical reaction code.
+    Solver for combustion with chemical reactions.
 
 \*---------------------------------------------------------------------------*/
 

applications/solvers/combustion/rhoReactingFoam/rhoReactingFoam.C

@@ -26,7 +26,8 @@ Application
     rhoReactingFoam
 
 Description
-    Chemical reaction code using density based thermodynamics package.
+    Solver for combustion with chemical reactions using density based
+    thermodynamics package.
 
 \*---------------------------------------------------------------------------*/
 

applications/solvers/discreteMethods/dsmc/dsmcFoam/dsmcFoam.C

@@ -26,7 +26,8 @@ Application
     dsmcFoam
 
 Description
-    Direct Simulation Monte Carlo Solver for 3D, transient, multi-species flows
+    Direct simulation Monte Carlo (DSMC) solver for 3D, transient, multi-
+    species flows
 
 \*---------------------------------------------------------------------------*/
 

applications/solvers/discreteMethods/molecularDynamics/mdEquilibrationFoam/mdEquilibrationFoam.C

@@ -26,7 +26,7 @@ Application
     mdEquilibrationFoam
 
 Description
-    Equilibrates and/or preconditions MD systems
+    Equilibrates and/or preconditions molecular dynamics systems
 
 \*---------------------------------------------------------------------------*/
 

applications/solvers/discreteMethods/molecularDynamics/mdFoam/mdFoam.C

@@ -26,7 +26,7 @@ Application
     mdFoam
 
 Description
-    molecular dynamics solver for fluid dynamics
+    Molecular dynamics solver for fluid dynamics
 
 \*---------------------------------------------------------------------------*/
 

applications/solvers/heatTransfer/buoyantPisoFoam/buoyantPisoFoam.C

@@ -26,9 +26,11 @@ Application
     buoyantPisoFoam
 
 Description
-    Transient Solver for buoyant, turbulent flow of compressible fluids for
-    ventilation and heat-transfer. Turbulence is modelled using a run-time
-    selectable compressible RAS or LES model.
+    Transient solver for buoyant, turbulent flow of compressible fluids for
+    ventilation and heat-transfer.
+
+    Turbulence is modelled using a run-time selectable compressible RAS or
+    LES model.
 
 \*---------------------------------------------------------------------------*/
 

applications/solvers/incompressible/shallowWaterFoam/shallowWaterFoam.C

@@ -27,6 +27,7 @@ Application
 
 Description
     Transient solver for inviscid shallow-water equations with rotation.
+
     If the geometry is 3D then it is assumed to be one layers of cells and the
     component of the velocity normal to gravity is removed.
 

applications/solvers/lagrangian/porousExplicitSourceReactingParcelFoam/porousExplicitSourceReactingParcelFoam.C

@@ -26,13 +26,17 @@ Application
     porousExplicitSourceReactingParcelFoam
 
 Description
+    Transient PISO solver for compressible, laminar or turbulent flow with
+    reacting Lagrangian parcels for porous media, including explicit sources
+
+    The solver includes:
     - reacting parcel cloud
     - porous media
     - point mass sources
     - polynomial based, incompressible thermodynamics (f(T))
 
     Note: ddtPhiCorr not used here when porous zones are active
-    - not well defined for porous calcs
+    - not well defined for porous calculations
 
 \*---------------------------------------------------------------------------*/
 

applications/solvers/lagrangian/uncoupledKinematicParcelFoam/uncoupledKinematicParcelFoam.C

@@ -23,11 +23,13 @@ License
     Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
 
 Application
-    kinematicParcelFoam
+    uncoupledKinematicParcelFoam
 
 Description
-    Transient solver for a single kinematicCloud. Uses pre-calculated velocity
-    field to evolve a cloud.
+    Transient solver for the passive transport of a single kinematic
+    particle could.
+
+    Uses a pre- calculated velocity field to evolve the cloud.
 
 \*---------------------------------------------------------------------------*/
 

applications/solvers/multiphase/compressibleInterDyMFoam/compressibleInterDyMFoam.C

@@ -27,11 +27,13 @@ Application
 
 Description
     Solver for 2 compressible, isothermal immiscible fluids using a VOF
-    (volume of fluid) phase-fraction based interface capturing approach.
-    The momentum and other fluid properties are of the "mixture" and a single
-    momentum equation is solved.
+    (volume of fluid) phase-fraction based interface capturing approach,
+    with optional mesh motion and mesh topology changes including adaptive
+    re-meshing.
 
-    Turbulence modelling is generic, i.e. laminar, RAS or LES may be selected.
+    The momentum and other fluid properties are of the "mixture" and a
+    single momentum equation is solved.  Turbulence modelling is generic,
+    i.e. laminar, RAS or LES may be selected.
 
 \*---------------------------------------------------------------------------*/
 

applications/solvers/multiphase/compressibleInterFoam/compressibleInterFoam.C

@@ -28,10 +28,11 @@ Application
 Description
     Solver for 2 compressible, isothermal immiscible fluids using a VOF
     (volume of fluid) phase-fraction based interface capturing approach.
+
     The momentum and other fluid properties are of the "mixture" and a single
     momentum equation is solved.
 
-    Turbulence modelling is generic, i.e. laminar, RAS or LES may be selected.
+    Turbulence modelling is generic, i.e.  laminar, RAS or LES may be selected.
 
 \*---------------------------------------------------------------------------*/
 

applications/solvers/multiphase/interFoam/interFoam.C

@@ -28,10 +28,11 @@ Application
 Description
     Solver for 2 incompressible, isothermal immiscible fluids using a VOF
     (volume of fluid) phase-fraction based interface capturing approach.
+
     The momentum and other fluid properties are of the "mixture" and a single
     momentum equation is solved.
 
-    Turbulence modelling is generic, i.e. laminar, RAS or LES may be selected.
+    Turbulence modelling is generic, i.e.  laminar, RAS or LES may be selected.
 
     For a two-fluid approach see twoPhaseEulerFoam.
 

applications/solvers/multiphase/interPhaseChangeFoam/interPhaseChangeFoam.C

@@ -28,8 +28,10 @@ Application
 Description
     Solver for 2 incompressible, isothermal immiscible fluids with phase-change
     (e.g. cavitation).  Uses a VOF (volume of fluid) phase-fraction based
-    interface capturing approach.  The momentum and other fluid properties are
-    of the "mixture" and a single momentum equation is solved.
+    interface capturing approach.
+
+    The momentum and other fluid properties are of the "mixture" and a
+    single momentum equation is solved.
 
     The set of phase-change models provided are designed to simulate cavitation
     but other mechanisms of phase-change are supported within this solver

applications/solvers/multiphase/multiphaseInterFoam/multiphaseInterFoam.C

@@ -27,7 +27,7 @@ Application
 
 Description
     Solver for n incompressible fluids which captures the interfaces and
-    includes surface-tension and contact-angle effects for each.
+    includes surface-tension and contact-angle effects for each phase.
 
     Turbulence modelling is generic, i.e. laminar, RAS or LES may be selected.
 

applications/utilities/preProcessing/changeDictionary/changeDictionary.C

@@ -26,8 +26,10 @@ Application
     changeDictionary
 
 Description
-    Simple dictionary changing tool. Can be used to e.g. change the patch
-    type. Reads dictionaries (fields) and entries to change from a dictionary.
+    Utility to change dictionary entries, e.g. can be used to change the patch
+    type in the field and polyMesh/boundary files.
+
+    Reads dictionaries (fields) and entries to change from a dictionary.
     E.g. to make the @em movingWall a @em fixedValue for @em p, the
     @c system/changeDictionaryDict would contain the following:
     @verbatim