STYLE: createBafflesDict: not used. Built-in into blockMesh

tutorials/incompressible/pimpleFoam/RAS/oscillatingInletACMI2D/system/createBafflesDict

-/*--------------------------------*- C++ -*----------------------------------*\
-| =========                 |                                                 |
-| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
-|  \\    /   O peration     | Version:  v2012                                 |
-|   \\  /    A nd           | Website:  www.openfoam.com                      |
-|    \\/     M anipulation  |                                                 |
-\*---------------------------------------------------------------------------*/
-FoamFile
-{
-    version     2.0;
-    format      ascii;
-    class       dictionary;
-    object      createBafflesDict;
-}
-// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
-
-// Whether to convert internal faces only (so leave boundary faces intact).
-// This is only relevant if your face selection type can pick up boundary
-// faces.
-internalFacesOnly false;
-
-
-// Baffles to create.
-baffles
-{
-    // NOTE: cyclicAMI patches MUST BE defined PRIOR to their associated
-    //       blockage patches
-
-    ACMI1
-    {
-        //- Use predefined faceZone to select faces and orientation.
-        type        faceZone;
-        zoneName    couple1Faces;
-
-        patches
-        {
-            master
-            {
-                //- Master side patch
-                name            ACMI1_couple;
-                type            cyclicACMI;
-                matchTolerance  0.0001;
-                neighbourPatch  ACMI2_couple;
-                nonOverlapPatch ACMI1_blockage;
-                transform       noOrdering;
-            }
-            slave // not used since we're manipulating a boundary patch
-            {
-                //- Slave side patch
-                name            ACMI1_couple;
-                type            patch;
-            }
-
-            master2
-            {
-                //- Master side patch
-                name            ACMI1_blockage;
-                type            wall;
-            }
-            slave2 // not used since we're manipulating a boundary patch
-            {
-                //- Slave side patch
-                name            ACMI1_blockage;
-                type            wall;
-            }
-
-        }
-    }
-    ACMI2
-    {
-        //- Use predefined faceZone to select faces and orientation.
-        type        faceZone;
-        zoneName    couple2Faces;
-
-        patches
-        {
-            master
-            {
-                //- Master side patch
-                name            ACMI2_couple;
-                type            cyclicACMI;
-                matchTolerance  0.0001;
-                neighbourPatch  ACMI1_couple;
-                nonOverlapPatch ACMI2_blockage;
-                transform       noOrdering;
-            }
-            slave // not used since we're manipulating a boundary patch
-            {
-                //- Slave side patch
-                name            ACMI2_couple;
-                type            patch;
-            }
-
-            master2
-            {
-                //- Master side patch
-                name            ACMI2_blockage;
-                type            wall;
-            }
-            slave2 // not used since we're manipulating a boundary patch
-            {
-                //- Slave side patch
-                name            ACMI2_blockage;
-                type            wall;
-            }
-        }
-    }
-}
-
-
-// ************************************************************************* //