ENH: collapseEdges: read meshQualityDict. parallel operation.

applications/utilities/mesh/advanced/collapseEdges/collapseEdges.C

@@ -993,7 +993,7 @@ PackedBoolList checkMeshQuality(const polyMesh& mesh)
     (
         IOobject
         (
-            "meshQualityControls",
+            "meshQualityDict",
             mesh.time().system(),
             mesh.time(),
             IOobject::MUST_READ,

applications/utilities/mesh/advanced/collapseEdges/meshQualityDict

+/*--------------------------------*- C++ -*----------------------------------*\
+| =========                 |                                                 |
+| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
+|  \\    /   O peration     | Version:  dev                                   |
+|   \\  /    A nd           | Web:      http://www.openfoam.org               |
+|    \\/     M anipulation  |                                                 |
+\*---------------------------------------------------------------------------*/
+
+FoamFile
+{
+    version         2.0;
+    format          ascii;
+
+    root            "";
+    case            "";
+    instance        "";
+    local           "";
+
+    class           dictionary;
+    object          meshQualityDict;
+}
+
+// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
+
+//- Maximum non-orthogonality allowed. Set to 180 to disable.
+maxNonOrtho         65;
+
+//- Max skewness allowed. Set to <0 to disable.
+maxBoundarySkewness 50;
+
+//- Max skewness allowed. Set to <0 to disable.
+maxInternalSkewness 10;
+
+//- Max concaveness allowed. Is angle (in degrees) below which concavity
+//  is allowed. 0 is straight face, <0 would be convex face.
+//  Set to 180 to disable.
+maxConcave          80;
+
+//- Minimum pyramid volume. Is absolute volume of cell pyramid.
+//  Set to a sensible fraction of the smallest cell volume expected.
+//  Set to very negative number (e.g. -1E30) to disable.
+minVol              1e-20;
+
+//- Minimum quality of the tet formed by the face-centre
+//  and variable base point minimum decomposition triangles and
+//  the cell centre. This has to be a positive number for tracking
+//  to work. Set to very negative number (e.g. -1E30) to
+//  disable.
+//     <0 = inside out tet,
+//      0 = flat tet
+//      1 = regular tet
+minTetQuality       1e-30;
+
+//- Minimum face area. Set to <0 to disable.
+minArea             -1;
+
+//- Minimum face twist. Set to <-1 to disable. dot product of face normal
+//- and face centre triangles normal
+minTwist            0.0;
+
+//- minimum normalised cell determinant
+//- 1 = hex, <= 0 = folded or flattened illegal cell
+minDeterminant      0.001;
+
+//- minFaceWeight (0 -> 0.5)
+minFaceWeight       0.02;
+
+//- minVolRatio (0 -> 1)
+minVolRatio         0.01;
+
+//must be >0 for Fluent compatibility
+minTriangleTwist    -1;
+
+
+// ************************************************************************* //