problems with the tensor::eigenValues calculation:

    "complex eigenvalues detected for tensor:"

for very high aspect ratio faces.

Conflicts:
	applications/utilities/surface/surfaceFeatureConvert/surfaceFeatureConvert.C
	applications/utilities/surface/surfaceFeatureExtract/surfaceFeatureExtract.C
	src/Allwmake
	src/edgeMesh/Make/files
	src/edgeMesh/edgeMesh.C
	src/edgeMesh/edgeMesh.H
	src/edgeMesh/edgeMeshI.H
	src/edgeMesh/edgeMeshIO.C
	src/edgeMesh/featureEdgeMesh.C
	src/edgeMesh/featureEdgeMesh.H
	src/edgeMesh/featureEdgeMesh/featureEdgeMesh.C
	src/edgeMesh/featureEdgeMesh/featureEdgeMesh.H
	src/meshTools/searchableSurface/closedTriSurfaceMesh.C
	src/meshTools/searchableSurface/closedTriSurfaceMesh.H

Merged Mark's work on edgeMesh with my featureEdgeMesh.

in a similar way to calculate the inertia of cells.

http://www.geometrictools.com/LibPhysics/RigidBody/RigidBody.html

in surfaceInertia utility.  Allows calculation of shell or solid
properties of a triSurface, with optionally specified volumetric or
surface density.  Default behaviour is to calculate inertia around
centre of mass, with option to specify reference point.

Various test surfaces supplied and tested against analytical results.

- Previously had just 'Warning' instead of '::Foam::Warning', which
  meant that an identically named class method would inadvertently be
  used - resulting in a compile failure.

- needs Coco/R 16 Dec 2009 version

Improve constructors.

    - Use (const UList<token>&) instead of (const List<token>&)

    - Add (const Xfer< List<token> >&) constructor.

According to the openmpi release information:
- Use GNU Libtool 2.2.6b to build Open MPI, which updates the
  embedded "libltdl" library to fix a potential security
  vulnerability. There are no other changes compared to Open MPI
  v1.3.4.

For development purposes it should thus be adequate to simply

    ( cd $WM_THIRD_PARTY_DIR && mv openmpi-1.3.4 openmpi-1.4 )

if you don't wish to recompile things.

According to the openmpi release information:
- Use GNU Libtool 2.2.6b to build Open MPI, which updates the
  embedded "libltdl" library to fix a potential security
  vulnerability. There are no other changes compared to Open MPI
  v1.3.4.

For development purposes it should thus be adequate to simply

    ( cd $WM_THIRD_PARTY_DIR && mv openmpi-1.3.4 openmpi-1.4 )

if you don't wish to recompile things.

- the size_ was not being adjusted in two assignment operators:
      PackedList<nBits>::operator=(const PackedList<nBits>&)
      PackedList<nBits>::operator=(const UList<label>&)

- Use (const UList<token>&) instead of (const List<token>&)

- Add (const Xfer< List<token> >&) constructor.

- The lineNumber of token::undefinedToken was being changed instead of
  just the lineNumber of the return token.

- use List::first() and List::last() methods as well

Provides a clean mechanism to run the lagrangian family of solvers without
a cloud

Changed the evaluation of omega to be a function of both omega in the viscous
sublayer and omega in the log region

Changed the evaluation of omega to be a function of both omega in the viscous
sublayer and omega in the log region

Read only support:

  .bdf, .nas - NASTRAN format. Handles both CBEAM and CROD as lines.
  CROD is what Hypermesh happens to output.

Write only support:

  .vtk - VTK legacy format in ASCII

Read/write support:
  .eMesh - native format, which is simply a list of points, edges
      with an additional IOobject header that lets them be moved about
      easily to use as a featureEdgeMesh.

  .inp - STAR-CD inp/cel/vrt combination
       IOobject header)

  .obj - Alias waverfront format

Radically simplify surfaceFeatureConvert by using the new edgeMesh
functionality.

Move compilation edgeMesh and surfMesh up in the list
(they are independent of triSurface).